This page lists 74 engine parts for the 2022 Toyota Yaris, across 25 part types, covering both the 1.5L L4 and the 1.6L L3 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
On the 2022 Toyota Yaris, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Valve Stem Seal (9 parts), Oil Filter (7 parts) and Crankshaft Seal (6 parts). The other 22 part types cover the remaining 52 parts.
The 2022 Toyota Yaris was sold with both the 1.5L L4 and the 1.6L L3 Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
14 brands supply engine parts for the 2022 Toyota Yaris, led by AJUSA (30 parts), ELRING (14 parts) and VARIOUS MFR (5 parts), plus 11 more brands. Quality grades include Economy, High Performance / Heavy Duty and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2022 Toyota Yaris. 2 parts have it, including ELRING 215420 (Valve Stem Seal) and ELRING 215710 (Valve Stem Seal). Each part number opens a page with every vehicle that part fits.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 1.5L L4 | CR4349CP | 🇲🇽 MX | SetTrimetal | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2022 Toyota Yaris — KING ENGINE BEARINGS CR4349CP.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 54210500 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 54340600 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2022 Toyota Yaris.
This group includes AJUSA 54210500 and AJUSA 54340600.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 1.5L L4 | MB5394AM | 🇲🇽 MX | SetBimetal (Aluminum Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: KING ENGINE BEARINGS MB5394AM.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 15105400 | 🇲🇽 MX | Front43 x 55.5 x 6 | View on Amazon |
| AJUSA Fits: 1.5L L4 | 15105500 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 15121900 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 15092800 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Fits: 1.5L L4 | 066620 | 🇲🇽 MX | Height [MM]: 7,5Inner Diameter [mm]: 78 | View on Amazon |
| ELRING Fits: 1.5L L4 | 808860 | 🇲🇽 MX | Height [MM]: 6Inner Diameter [mm]: 36 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts for the 2022 Toyota Yaris come from 2 brands — AJUSA and ELRING.
This group includes AJUSA 15105400, AJUSA 15105500 and AJUSA 15121900 and the remaining parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L3 Turbocharged | 81087800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 590440 | 🇲🇽 MX | SetThread Size: M10X1,5x126 | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts are listed for the 2022 Toyota Yaris, from AJUSA and ELRING.
Part numbers include AJUSA 81087800 and ELRING 590440.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 10224700 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 10276600 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| ELRING Fits: 1.5L L4 | 067600 | 🇲🇽 MX | Material: Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts are listed for the 2022 Toyota Yaris, from AJUSA and ELRING.
Listed part numbers: AJUSA 10224700, AJUSA 10276600 and ELRING 067600.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 52664900 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 52659600 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 067900 | 🇲🇽 MX | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 2022 Toyota Yaris, from AJUSA and ELRING.
Listed part numbers: AJUSA 52664900, AJUSA 52659600 and ELRING 067900.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 50591100 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 50586700 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 067590 | 🇲🇽 MX | with valve stem seals | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts are listed for the 2022 Toyota Yaris, from AJUSA and ELRING.
This group includes AJUSA 50591100, AJUSA 50586700 and ELRING 067590.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 13273000 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 13348700 | 🇲🇽 MX | Upper | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 13348800 | 🇲🇽 MX | Lower | View on Amazon |
| ELRING Fits: 1.5L L4 | 330520 | 🇲🇽 MX | Material: Metaloseal (VMQ) | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts are listed for the 2022 Toyota Yaris, from AJUSA and ELRING.
Part numbers include AJUSA 13273000, AJUSA 13348700 and AJUSA 13348800, among others listed above.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 1.5L L4 | 10220 | 🇲🇽 MX | RightHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.5L L4 | A4460 | 🇲🇽 MX | Front Right | View on Amazon |
| PIONEER Fits: 1.5L L4 | 610220 | 🇲🇽 MX | RightComplete Assembly | View on Amazon |
| WESTAR Fits: 1.5L L4 | EM7594 | 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
4 Motor Mount parts for the 2022 Toyota Yaris come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.
Part numbers include ANCHOR 10220, DEA / MARMON RIDE CONTROL A4460 and PIONEER 610220, among others listed above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 1.5L L4 | 300928 | 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
This group shows a single part: ANCHOR 300928.
Oil
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 1.5L L4 | VV935 | 🇲🇽 MX | Advanced Full Synthetic SAE 10W-301 Quart | View on Amazon |
| VALVOLINE Fits: 1.5L L4 | 881165 | 🇲🇽 MX | Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 1.5L L4 | 881052 | 🇲🇽 MX | Max Life High Mileage SAE 10W-305 Gallon Bay Box | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
3 Oil parts for the 2022 Toyota Yaris come from VALVOLINE.
The Full Synthetic section lists 2 options from VALVOLINE — full-synthetic oils. VALVOLINE VV935 is listed in this group.
In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 1 part: oils grouped for high-mileage engines. A representative part number is VALVOLINE 881052.
Part numbers include VALVOLINE VV935, VALVOLINE 881165 and VALVOLINE 881052.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 1.6L L3 Turbocharged | 090038 | 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Fits: 1.6L L3 Turbocharged | 090049 | 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| ELRING Fits: 1.5L L4 | 587290 | 🇲🇽 MX | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| ELRING Fits: 1.5L L4 | 952850 | 🇲🇽 MX | with Seal Ring | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts for the 2022 Toyota Yaris come from 2 brands — DORMAN and ELRING.
Listed part numbers: DORMAN 090038, DORMAN 090049 and ELRING 587290, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 22007000 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 22005800 | 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: 1.6L L3 Turbocharged | 095156 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 473500 | 🇲🇽 MX | Core Model | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts are listed for the 2022 Toyota Yaris, from AJUSA, DORMAN and ELRING.
Part numbers include AJUSA 22007000, AJUSA 22005800 and DORMAN 095156, among others listed above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 1.5L L4 | PG4612 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 1.6L L3 Turbocharged | PG4476 | 🇲🇽 MX | Spin-On | View on Amazon |
| VARIOUS MFR Fits: 1.6L L3 Turbocharged | PO4476TY2 | 🇲🇽 MX | OE StyleSpin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 1.5L L4 | M1108A | 🇲🇽 MX | Extended Performance | View on Amazon |
| MOBIL Fits: 1.6L L3 Turbocharged | M1103A | 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 1.5L L4 | PG4612EX | 🇲🇽 MX | Extended Life | View on Amazon |
| VARIOUS MFR Fits: 1.6L L3 Turbocharged | PG4476EX | 🇲🇽 MX | Extended LifeSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
7 Oil Filter parts for the 2022 Toyota Yaris come from 2 brands — VARIOUS MFR and MOBIL.
The Economy section lists 3 options from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PG4612 is listed in this group.
The High Performance / Heavy Duty section lists 2 options from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.
In the Standard Replacement grade, VARIOUS MFR supplies 2 parts: built to original-equipment specification. A representative part number is VARIOUS MFR PG4612EX.
This group includes VARIOUS MFR PG4612, VARIOUS MFR PG4476 and VARIOUS MFR PO4476TY2 and the remaining parts above.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 1.5L L4 | 2N6272 | 🇲🇽 MX | Full SetFor 2 Ring Piston | View on Amazon |
| HASTINGS MANUFACTURING Fits: 1.5L L4 | 2N6272S | 🇲🇽 MX | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
HASTINGS MANUFACTURING supplies both parts for the 2022 Toyota Yaris.
Part numbers include HASTINGS MANUFACTURING 2N6272 and HASTINGS MANUFACTURING 2N6272S.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 1.5L L4 | TW185AM | 🇲🇽 MX | Bimetal (Aluminum Base) | View on Amazon |
This table covers the Thrust washers.
This group shows a single part: KING ENGINE BEARINGS TW185AM.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 1.5L L4 | 10135 | 🇲🇽 MX | Rear Lower | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 1.5L L4 | A4456 | 🇲🇽 MX | Rear | View on Amazon |
| PIONEER Fits: 1.5L L4 | 630135 | 🇲🇽 MX | Rear | View on Amazon |
| WESTAR Fits: 1.5L L4 | EM7449 | 🇲🇽 MX | Rear Lower | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
4 Torque Strut Mount parts are listed for the 2022 Toyota Yaris, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.
Listed part numbers: ANCHOR 10135, DEA / MARMON RIDE CONTROL A4456 and PIONEER 630135, plus the other parts above.
Turbocharger Boost Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 1.6L L3 Turbocharged | 700513190 | 🇲🇽 MX | PneumaticElectric-Pneumatic | View on Amazon |
This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
This group shows a single part: PIERBURG 700513190.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L3 Turbocharged | JTC12803 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2022 Toyota Yaris — AJUSA JTC12803.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L3 Turbocharged | OP11439 | 🇲🇽 MX | Supply tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
This group shows a single part: AJUSA OP11439.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 11183900 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 56098200 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 316170 | 🇲🇽 MX | Material: Polyacrylate Rubber (ACM) | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Valve Cover Gasket parts for the 2022 Toyota Yaris come from 2 brands — AJUSA and ELRING.
This group includes AJUSA 11183900, AJUSA 56098200 and ELRING 316170.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.5L L4 | 85009300 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 85022700 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
2 Valve Lifter parts for the 2022 Toyota Yaris come from AJUSA.
Listed part numbers: AJUSA 85009300 and AJUSA 85022700.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 1.5L L4 | 215420 | 🇲🇽 MX | Height [MM]: 10Valve Stem Diameter [MM]: 5 | View on Amazon |
| ELRING Popular Fits: 1.5L L4 | 215710 | 🇲🇽 MX | Set | View on Amazon |
| AJUSA Fits: 1.5L L4 | 57070800 | 🇲🇽 MX | Engine # P5Y4,P5Y6 | View on Amazon |
| AJUSA Fits: 1.5L L4 | 12034400 | 🇲🇽 MX | Intake4.75 x 10.8 x 10.2 | View on Amazon |
| AJUSA Fits: 1.5L L4 | 12034500 | 🇲🇽 MX | Exhaust4.8 x 10.8 x 10.2 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 12027100 | 🇲🇽 MX | Intake4.3 x 10 x 10 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 12036100 | 🇲🇽 MX | Exhaust4.8 x 10 x 10 | View on Amazon |
| AJUSA Fits: 1.6L L3 Turbocharged | 57098500 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 1.5L L4 | 170020 | 🇲🇽 MX | Outside Diameter: 12.5 mmThickness: 10.0 mm | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Valve Stem Seal parts for the 2022 Toyota Yaris come from 2 brands — AJUSA and ELRING. The "Popular" part is ELRING 215420.
This group includes ELRING 215420, ELRING 215710 and AJUSA 57070800 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 | VVT246 | 🇲🇽 MX | Intake | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 1.5L L4 | VVT261 | 🇲🇽 MX | Exhaust | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2022 Toyota Yaris come from STANDARD MOTOR PRODUCTS.
Listed part numbers: STANDARD MOTOR PRODUCTS VVT246 and STANDARD MOTOR PRODUCTS VVT261.
Buying Engine Parts for a 2022 Toyota Yaris
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Valve Stem Seal and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2022 Toyota Yaris?
Our catalog currently lists 74 engine parts for the 2022 Toyota Yaris across 25 subcategories and 14 brands, covering both the 1.5L L4 and the 1.6L L3 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2022 Toyota Yaris engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2022 Toyota Yaris?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2022 Toyota Yaris?
Oil rows on this page include SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2022 Toyota Yaris was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2022 Toyota Yaris?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2022 Toyota Yaris
Engine Parts for Other Toyota Yaris Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.