1987 Acura Integra Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

One part is listed for the 1987 Acura Integra — SCHAEFFLER SR3460.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1987 Acura Integra, from APEX, FEL-PRO, MAHLE / CLEVITE and 11 other brands. APEX ATC1120 carries the "Popular" badge.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRH16.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

12 Connecting Rod Bearing parts for the 1987 Acura Integra come from 6 brands — MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 3 other brands. The "Popular" part is MAHLE / CLEVITE CB1461HN.

The High Performance section lists 5 options from KING ENGINE BEARINGS and MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1461HN is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE, ENGINETECH, ITM ENGINE COMPONENTS and 3 other brands supply 7 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1461P.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 1987 Acura Integra — ARP 2086001.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 1987 Acura Integra come from 3 brands — AJUSA, APEX and TOPLINE.

Part numbers include AJUSA 54060300, APEX ACS1017 and TOPLINE CBSH16.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

10 Crankshaft Main Bearing parts are listed for the 1987 Acura Integra, from MAHLE / CLEVITE, KING ENGINE BEARINGS, TOPLINE and 3 other brands. KING ENGINE BEARINGS MB5568AM carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS MB5568XP.

The Standard Replacement section: 8 options from MAHLE / CLEVITE, TOPLINE, KING ENGINE BEARINGS and 3 other brands. KING ENGINE BEARINGS MB5568AM is listed in this group.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts are listed for the 1987 Acura Integra, from BCA, FEL-PRO, SCHAEFFLER and 3 other brands. BCA NS99315 carries the "Popular" badge.

Part numbers include BCA NS99315, FEL-PRO 16275 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

21 Crankshaft Seal parts are listed for the 1987 Acura Integra, from FEL-PRO, NATIONAL, VICTOR REINZ and 11 other brands. FEL-PRO BS40430 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts for the 1987 Acura Integra come from 7 brands — APEX, OMNI 5, AJUSA and 4 other brands. The "Popular" part is APEX AHG117.

This group includes APEX AHG117, OMNI 5 PWC41000 and AJUSA 10075600 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 1987 Acura Integra come from 5 brands — APEX, AJUSA, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is APEX AHS1017.

Part numbers include APEX AHS1017, AJUSA 52102300 and ITM ENGINE COMPONENTS 0911001, among others listed above.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

2 Cylinder Repair Sleeve parts for the 1987 Acura Integra come from MELLING.

Listed part numbers: MELLING CSL616 and MELLING CSL716.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 1987 Acura Integra come from 4 brands — AJUSA, APEX, ITM ENGINE COMPONENTS and 1 other brand.

Listed part numbers: AJUSA 50115600, APEX AFS1017 and ITM ENGINE COMPONENTS 0901000, plus the other parts above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 1987 Acura Integra, from BECK/ARNLEY, ITM ENGINE COMPONENTS and TOPLINE.

Listed part numbers: BECK/ARNLEY 0213319, ITM ENGINE COMPONENTS RX35030 and TOPLINE EVH16.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1987 Acura Integra come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AMS1170.

Listed part numbers: APEX AMS1170, FEL-PRO MS93362 and AJUSA 13085000, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 1987 Acura Integra, from ITM ENGINE COMPONENTS and TOPLINE.

This group includes ITM ENGINE COMPONENTS RV35030 and TOPLINE IVH16.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 1987 Acura Integra, from DEA / MARMON RIDE CONTROL, ANCHOR, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A6501 carries the "Popular" badge.

Part numbers include DEA / MARMON RIDE CONTROL A6501, ANCHOR 9084 and DEA / MARMON RIDE CONTROL A6522, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

22 Oil parts are listed for the 1987 Acura Integra, from MOBIL and VALVOLINE. MOBIL 125195 carries the "Popular" badge.

In the Conventional grade, VALVOLINE supplies 2 parts: grouped under the catalog's "Conventional" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE 797671.

In the Full Synthetic grade, MOBIL supplies 8 parts: full-synthetic oils. A representative part number is MOBIL 125195.

The High Mileage (>75,000 Miles) section lists 9 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 125202 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 3 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 1987 Acura Integra come from HAYDEN.

This group includes HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

11 Oil Drain Plug parts are listed for the 1987 Acura Integra, from DORMAN, ELRING, AGS and 2 other brands. AGS ODP00007 carries the "Popular" badge.

The Piggyback section lists 1 option from DORMAN — grouped under the catalog's "Piggyback" designation — the notes column spells out what sets them apart. DORMAN 65229 is listed in this group.

The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092020 is listed in this group.

The Universal section lists 1 option from DORMAN — grouped under the catalog's "Universal" designation — the notes column spells out what sets them apart. DORMAN 65102 is listed in this group.

8 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 1987 Acura Integra come from 4 brands — ULTRA-POWER, DORMAN, AJUSA and 1 other brand. The "Popular" part is DORMAN 095144.

Listed part numbers: DORMAN 095144, AJUSA 22007400 and ELRING 243600, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 1987 Acura Integra, from BECK/ARNLEY, GATES, MOTORAD and 1 other brand.

This group includes BECK/ARNLEY 0160125, GATES 31109 and MOTORAD MO81 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 1987 Acura Integra, from CHAMP / LUBER-FINER, VARIOUS MFR, FAMOUS BRAND and 9 other brands. VARIOUS MFR PG4651 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, FAMOUS BRAND, PUROLATOR and 7 other brands supply 14 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4651.

The Standard Replacement section: 4 options from FRAM, VARIOUS MFR, WIX and 1 other brand. FRAM PH3531 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 1987 Acura Integra come from 3 brands — ATP, PIONEER and SPECTRA PREMIUM.

Listed part numbers: ATP 103297, PIONEER 501126 and SPECTRA PREMIUM HOP02A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 1987 Acura Integra, from FEL-PRO, ITM ENGINE COMPONENTS, APEX and 3 other brands. FEL-PRO OS30542R carries the "Popular" badge.

Listed part numbers: FEL-PRO OS30542R, ITM ENGINE COMPONENTS 0990907 and APEX AOP100, plus the other parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: ITM ENGINE COMPONENTS RY6220.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts for the 1987 Acura Integra come from 4 brands — MAHLE / CLEVITE, SEALED POWER, ITM ENGINE COMPONENTS and 1 other brand.

In the Premium grade, MAHLE / CLEVITE and SEALED POWER supply 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 41592CP.

Standard Replacement: 2 parts, from ITM ENGINE COMPONENTS and TOPLINE. A representative part number is ITM ENGINE COMPONENTS 0216150.

This group includes MAHLE / CLEVITE 41592CP, SEALED POWER E515KC and ITM ENGINE COMPONENTS 0216150 and the remaining parts above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 1987 Acura Integra — TOPLINE RAH16.

This table covers the Thrust washers. Read more

6 Thrust Washer parts are listed for the 1987 Acura Integra, from ENGINETECH, MAHLE / CLEVITE, ENGINE PRO and 3 other brands. ENGINETECH TW1516 carries the "Popular" badge.

Listed part numbers: ENGINETECH TW1516, MAHLE / CLEVITE TW473S and ENGINE PRO 13473S, plus the other parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

7 Timing Belt parts for the 1987 Acura Integra come from 7 brands — ITM ENGINE COMPONENTS, CLOYES, BECK/ARNLEY and 4 other brands. The "Popular" part is ITM ENGINE COMPONENTS 4124.

The Economy section: 2 options from ITM ENGINE COMPONENTS and CLOYES. ITM ENGINE COMPONENTS 4124 is listed in this group.

Standard Replacement: 5 parts, from BECK/ARNLEY, BANDO, INA and 2 other brands. A representative part number is BECK/ARNLEY 0260252.

Listed part numbers: ITM ENGINE COMPONENTS 4124, CLOYES B130 and BECK/ARNLEY 0260252, plus the other parts above.

This table covers the Timing Belt & component kits. Read more

4 Timing Belt & Component Kit parts are listed for the 1987 Acura Integra, from GMB, CLOYES and US MOTOR WORKS.

Economy: 1 part, from CLOYES. A representative part number is CLOYES BK130.

The Standard Replacement section: 3 options from GMB and US MOTOR WORKS. GMB 24350130 is listed in this group.

Part numbers include CLOYES BK130, GMB 24350130 and GMB 34350130, among others listed above.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

8 Timing Belt Tensioner parts are listed for the 1987 Acura Integra, from JAPANESE OE, INA, CLOYES and 4 other brands. INA ZT9354 carries the "Popular" badge.

This group includes INA ZT9354, CLOYES 95354 and DAYCO 84067 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 1987 Acura Integra — ITM ENGINE COMPONENTS 60081.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts are listed for the 1987 Acura Integra, from SCHAEFFLER and SKF.

Part numbers include SCHAEFFLER SR3465 and SKF 99123.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts are listed for the 1987 Acura Integra, from ITM ENGINE COMPONENTS, MAHLE / CLEVITE, SCHAEFFLER and 1 other brand.

Part numbers include ITM ENGINE COMPONENTS 1500908, MAHLE / CLEVITE JV1059 and SCHAEFFLER SS2302, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts are listed for the 1987 Acura Integra, from APEX, FEL-PRO, AJUSA and 2 other brands. APEX AVC117S carries the "Popular" badge.

Listed part numbers: APEX AVC117S, FEL-PRO VS50298R1 and AJUSA 56005000, plus the other parts above.

This table covers the Valve Cover grommets. Read more

4 Valve Cover Grommet parts are listed for the 1987 Acura Integra, from APEX, BECK/ARNLEY, FEL-PRO and 1 other brand.

This group includes APEX AES101, BECK/ARNLEY 0396607 and FEL-PRO ES70362 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

9 Valve Guide parts are listed for the 1987 Acura Integra, from ENGINETECH, ITM ENGINE COMPONENTS, SBI and 2 other brands. ENGINETECH GD8155 carries the "Popular" badge.

Part numbers include ENGINETECH GD8155, ENGINETECH GD8156 and ITM ENGINE COMPONENTS VG981CI, among others listed above.

This table covers the Valve seats. Read more

5 Valve Seat parts for the 1987 Acura Integra come from 3 brands — QUALCAST, SBI and ENGINETECH. The "Popular" part is ENGINETECH ST125062.

This group includes ENGINETECH ST125062, QUALCAST 21118754 and QUALCAST 21125062 and the remaining parts above.

This table covers the Valve Spring retainers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 051162.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: SBI 1211054.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Valve Stem Seal parts are listed for the 1987 Acura Integra, from APEX, FEL-PRO, SBI and 5 other brands. APEX AVS1017 carries the "Popular" badge.