2019 BMW 740I Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2019 BMW 740I, from AJUSA and ELRING.

This group includes AJUSA 54265400 and ELRING 794700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2019 BMW 740I come from KING ENGINE BEARINGS.

Part numbers include KING ENGINE BEARINGS MB7779SM and KING ENGINE BEARINGS MB7779MC.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 2019 BMW 740I come from 4 brands — ELRING, VICTOR REINZ, VAICO and 1 other brand. The "Popular" part is ELRING 575970.

This group includes ELRING 575970, VAICO V201984 and ELRING 586550 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2019 BMW 740I, from AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 81069200, ELRING 794480 and VICTOR REINZ 141226103.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2019 BMW 740I, from AJUSA and VICTOR REINZ.

Part numbers include AJUSA 10230610, AJUSA 10230600 and VICTOR REINZ 611084400, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2019 BMW 740I, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 52505800 and MAHLE / CLEVITE HS55511.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

This group shows a single part: WELLS 5S16785.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 28400.

This table covers the Engine covers. Read more

TECHPRO supplies the 3 Engine Cover parts for the 2019 BMW 740I. 2 parts fit every engine; the other 1 is engine-specific.

This group includes TECHPRO BM1228184, TECHPRO BM1228188 and TECHPRO BM1228189.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2019 BMW 740I — AJUSA 50455400.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts are listed for the 2019 BMW 740I, from ASTEMO / HITACHI and WELLS.

Listed part numbers: ASTEMO / HITACHI HCF3057 and WELLS 5T5004.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: REIN HWB0074.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2019 BMW 740I, from VICTOR REINZ, ELRING, MAHLE / CLEVITE and 1 other brand.

This group includes ELRING 076500, MAHLE / CLEVITE MS20465 and ULTRA-POWER MS19660 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 2019 BMW 740I come from 3 brands — ANCHOR, WESTAR and VNE. The "Popular" part is ANCHOR 10258.

Listed part numbers: ANCHOR 10258, ANCHOR 10259 and ANCHOR 10260, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2019 BMW 740I come from ANCHOR.

Listed part numbers: ANCHOR 301068 and ANCHOR 300958.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

7 Oil parts for the 2019 BMW 740I come from 4 brands — LIQUI MOLY, PENTOSIN, MOBIL and 1 other brand. The "Popular" part is LIQUI MOLY 22044.

Part numbers include LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048, among others listed above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

5 Oil Cooler parts for the 2019 BMW 740I come from 4 brands — NISSENS, ÜRO PARTS, REIN and 1 other brand. The "Popular" part is ÜRO PARTS 11428583901. 1 part fits every engine; the other 4 are engine-specific.

Part numbers include ÜRO PARTS 11428583901, NISSENS 91359 and NISSENS 91487, among others listed above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Cooler Gasket parts are listed for the 2019 BMW 740I, from AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 77010300, ELRING 784680 and MAHLE / CLEVITE B33793.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2019 BMW 740I come from 4 brands — ELRING, DORMAN, AGS and 1 other brand. The "Popular" part is DORMAN 090088. 2 parts fit every engine; the other 3 are engine-specific.

This group includes DORMAN 090088, AGS ODP00010 and ELRING 455740 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2019 BMW 740I, from AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 21010400, ELRING 110507 and VICTOR REINZ 417005800.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts for the 2019 BMW 740I come from 5 brands — REIN, CALORSTAT, MOTORAD and 2 other brands. The "Popular" part is REIN CPL0036. 1 part fits every engine; the other 5 are engine-specific.

Listed part numbers: REIN CPL0036, REIN CPL0041 and CALORSTAT OC2314, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

13 Oil Filter parts for the 2019 BMW 740I come from 11 brands — MOBIL, VARIOUS MFR, FVP and 8 other brands. The "Popular" part is HENGST E859HD352.

The Economy section lists 2 options from FVP and PRO-TEC — the catalog's value-priced group. FVP G0342 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C354A is listed in this group.

In the Standard Replacement grade, VARIOUS MFR, HENGST, MANN and 5 other brands supply 9 parts: built to original-equipment specification. A representative part number is HENGST E859HD352.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2019 BMW 740I — MAHLE / CLEVITE B33794.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts are listed for the 2019 BMW 740I, from MOTORAD, REIN and VAICO.

Part numbers include MOTORAD MO388, REIN CPL0070 and VAICO V202772.

This table covers the Oil Filter housings. Read more

5 Oil Filter Housing parts are listed for the 2019 BMW 740I, from VEMO, DORMAN, HENGST and 1 other brand. DORMAN 926453 carries the "Popular" badge.

Part numbers include DORMAN 926453, HENGST H811H and REIN HEU0116, among others listed above.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 784620.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Oil Level Sensor parts for the 2019 BMW 740I come from 3 brands — FACET, HELLA and VEMO.

Part numbers include FACET 70240, HELLA 013680141 and VEMO V20725259.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

4 Oil Level Sensor Gasket / O-Ring parts for the 2019 BMW 740I come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 16078650, AJUSA 01311200 and ELRING 351210, among others listed above.

This table covers the oil pans that hold the engine's oil sump. Read more

REIN supplies both parts for the 2019 BMW 740I.

This group includes REIN ESK0247 and REIN ESK0249.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2019 BMW 740I — VAICO V203921.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2019 BMW 740I — CLOYES S1172.

This table covers the rocker arms that transfer cam motion to the valves. Read more

This group shows a single part: INA VF0241.

This table covers the Timing Cam sprockets. Read more

This group shows a single part: VAICO V203778.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2019 BMW 740I — VAICO V103405.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

7 Timing Chain & Component Kit parts for the 2019 BMW 740I come from 2 brands — VAICO and S.A. GEAR. The "Popular" part is S.A. GEAR 76400.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76400 is listed in this group.

Standard Replacement: 5 parts, from VAICO. A representative part number is VAICO V2010018BEK.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes S.A. GEAR 76400, VAICO V2010018BEK and VAICO V2010017BEK and the remaining parts above.

This table covers the turbochargers that compress intake air. Read more

This group shows a single part: GPD 2511763.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2019 BMW 740I — WELLS 5S14741.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

7 Turbocharger Coolant Line parts for the 2019 BMW 740I come from 3 brands — REIN, ÜRO PARTS and SUNSONG. The "Popular" part is REIN CHT0962. 1 part fits every engine; the other 6 are engine-specific.

This group includes REIN CHT0962, ÜRO PARTS 11538666857 and REIN CHT0963 and the remaining parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 BMW 740I — AJUSA JTC12328.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2019 BMW 740I — REIN TRK0025.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts for the 2019 BMW 740I come from 2 brands — REIN and AJUSA.

Listed part numbers: AJUSA OP10964, REIN TFP0390 and REIN TRP0391.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: AJUSA 16007800.

This table covers the Valve covers. Read more

8 Valve Cover parts are listed for the 2019 BMW 740I, from REIN, DORMAN, ÜRO PARTS and 4 other brands. DORMAN 264764 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

Part numbers include DORMAN 264764, ÜRO PARTS 11127645173 and APEX VCS983, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2019 BMW 740I come from 4 brands — VICTOR REINZ, AJUSA, APEX and 1 other brand. The "Popular" part is VICTOR REINZ 151248001.

Listed part numbers: VICTOR REINZ 151248001, AJUSA 56068700 and APEX AVC983S, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85022300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts for the 2019 BMW 740I come from 4 brands — ELRING, MAHLE / CLEVITE, VICTOR REINZ and 1 other brand. The "Popular" part is ELRING 364500.

This group includes ELRING 364500, ELRING 660360 and AJUSA 57051500 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

9 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2019 BMW 740I come from 7 brands — WELLS, GATES, WALKER PRODUCTS and 4 other brands. The "Popular" part is GATES VVS229.

The Economy section: 6 options from WELLS, GATES, WALKER PRODUCTS and 2 other brands. GATES VVS229 is listed in this group.

Standard Replacement: 1 part, from VAICO. A representative part number is VAICO V203797.

2 further parts sit outside the graded sections, with the same engine-level match.

Part numbers include GATES VVS229, WALKER PRODUCTS 5901282 and HOLSTEIN 2VTS0370, among others listed above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2019 BMW 740I — AJUSA 01907000.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

4 Variable Valve Timing (VVT) Sprocket parts for the 2019 BMW 740I come from 3 brands — INA, STANDARD MOTOR PRODUCTS and VAICO.

Listed part numbers: INA VV1122, INA VV1123 and STANDARD MOTOR PRODUCTS VVT768, plus the other parts above.