The 2024 BMW 740I has 48 engine parts with verified fitment on this page — 23 part types and 20 brands, covering the 3.0L L6 Turbocharged engine. Each part includes a manufacturer part number and application notes.
The engine on the 2024 BMW 740I covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (13 parts), Oil (6 parts) and Valve Stem Seal (3 parts). The other 20 part types cover the remaining 26 parts.
The 2024 BMW 740I came with a single engine, the 3.0L L6 Turbocharged, and every part is verified against it.
20 brands supply engine parts for the 2024 BMW 740I, led by AJUSA (18 parts), REIN (3 parts) and LIQUI MOLY (3 parts), plus 17 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2024 BMW 740I. 5 parts have it, including LIQUI MOLY 22044 (Oil) and HENGST E859HD352 (Oil Filter). Each part number opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 54346700 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2024 BMW 740I — AJUSA 54346700.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 15075200 | 🇺🇸 US | Front740i Base Model | View on Amazon |
| AJUSA | 15107900 | 🇺🇸 US | Rear740i Base Model | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts for the 2024 BMW 740I come from AJUSA.
This group includes AJUSA 15075200 and AJUSA 15107900.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 81089800 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2024 BMW 740I — AJUSA 81089800.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 10280400 | 🇺🇸 US | Multi Layered Steel | View on Amazon |
| AJUSA | 10280410 | 🇺🇸 US | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies both parts for the 2024 BMW 740I.
Listed part numbers: AJUSA 10280400 and AJUSA 10280410.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 52679600 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2024 BMW 740I — AJUSA 52679600.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 50600600 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2024 BMW 740I — AJUSA 50600600.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWB0074 | 🇺🇸 US | 10 x 65mm | View on Amazon |
This table covers the Harmonic Balancer bolts.
This group shows a single part: REIN HWB0074.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 24058100 | 🇺🇸 US | Material: Fluoroelastomer (FKM)VI | View on Amazon |
| ELRING | 076500 | 🇺🇸 US | 740i Base Model | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Intake Manifold Gasket parts are listed for the 2024 BMW 740I, from AJUSA and ELRING.
Listed part numbers: AJUSA 24058100 and ELRING 076500.
Oil
Summary: Notes list SAE 0W-20 and SAE 0W-30. Confirm the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular | 22044 | 🇺🇸 US | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Popular | 22046 | 🇺🇸 US | Top Tec 6600 0W-205 Liter | View on Amazon |
| LIQUI MOLY | 22048 | 🇺🇸 US | Top Tec 6600 0W-2020 Liter | View on Amazon |
| MOBIL | 127568 | 🇺🇸 US | ESP 5W30 1 Quart | View on Amazon |
| VALVOLINE | 888048 | 🇺🇸 US | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE | 893931 | 🇺🇸 US | European Vehicle Full Synthetic SAE 0W-301 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
6 Oil parts for the 2024 BMW 740I come from 3 brands — LIQUI MOLY, VALVOLINE and MOBIL. The "Popular" part is LIQUI MOLY 22044.
This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048 and the remaining parts above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 090088 | 🇺🇸 US | MetalStandard | View on Amazon |
| REIN | HWU1041 | 🇺🇸 US | View on Amazon |
This table covers the drain plugs in the oil pan.
2 Oil Drain Plug parts for the 2024 BMW 740I come from 2 brands — DORMAN and REIN.
Listed part numbers: DORMAN 090088 and REIN HWU1041.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 21010400 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW 740I — AJUSA 21010400.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD | MO214 | 🇺🇸 US | 740i Base Model | View on Amazon |
This table covers the caps on the oil filler neck.
This group shows a single part: MOTORAD MO214.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP | G0342 | 🇺🇸 US | 740i xDriveOriginal Equipment (OE) Part Number 11427826799 | View on Amazon |
| PRO-TEC | PXL51186 | 🇺🇸 US | Pro Tec Cartridge Lube Metal Free Filter | View on Amazon |
| PRO-TEC | PXL10342 | 🇺🇸 US | 740i xDrive | View on Amazon |
| PUROLATOR | L35280 | 🇺🇸 US | 740i Base ModelSynthetic Oil Application. Premium filter recommended | View on Amazon |
| ULTRA-POWER | 51186 | 🇺🇸 US 🇨🇦 CA | Fits 2WD | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL | M1C457A | 🇺🇸 US | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST Popular | E859HD352 | 🇺🇸 US | Includes Gasket SetCartridge | View on Amazon |
| MANN Popular | HU9384X | 🇺🇸 US | Height: 6.34 InStyle: Cartridge Lube Metal Free Filter | View on Amazon |
| MANN Popular | HU6022Z | 🇺🇸 US | 740i xDrive | View on Amazon |
| HASTINGS / BALDWIN | P40076 | 🇺🇸 US | Fits 740i xDriv | View on Amazon |
| VARIOUS MFR | PG99256EX | 🇺🇸 US | Extended Life | View on Amazon |
| WIX | 51186 | 🇺🇸 US | 740i Base ModelFactory Filled Synthetic Oil | View on Amazon |
| WIX | WL10342 | 🇺🇸 US | 740i xDriveFactory Filled Synthetic Oil | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
13 Oil Filter parts for the 2024 BMW 740I come from 10 brands — PRO-TEC, MANN, WIX and 7 other brands. The "Popular" part is HENGST E859HD352.
The Economy section lists 5 options from PRO-TEC, FVP, PUROLATOR and 1 other brand — the catalog's value-priced group. FVP G0342 is listed in this group.
The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C457A is listed in this group.
In the Standard Replacement grade, MANN, WIX, HENGST and 2 other brands supply 7 parts: built to original-equipment specification. A representative part number is HENGST E859HD352.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD | MO388 | 🇺🇸 US | View on Amazon | |
| REIN | CPL0070 | 🇺🇸 US | View on Amazon |
This table covers the Oil Filter covers.
2 Oil Filter Cover parts are listed for the 2024 BMW 740I, from MOTORAD and REIN.
This group includes MOTORAD MO388 and REIN CPL0070.
Oil Filter Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST | H811H | 🇺🇸 US | 740i Base Modelwith E859H D352 Filter, Oil Cooler and Bolts/Screws | View on Amazon |
This table covers the Oil Filter housings.
One part is listed for the 2024 BMW 740I — HENGST H811H.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 77086300 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW 740I — AJUSA 77086300.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | JTC12855 | 🇺🇸 US | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW 740I — AJUSA JTC12855.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | OP11489 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
This group shows a single part: AJUSA OP11489.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP | SK743462 | 🇺🇸 US | View on Amazon |
This table covers the Valve covers.
One part is listed for the 2024 BMW 740I — SKP SK743462.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 56103300 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 56103300.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 85022300 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
This group shows a single part: AJUSA 85022300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 57051500 | 🇺🇸 US | 740i Base ModelEngine # B58B30P | View on Amazon |
| AJUSA | 12027900 | 🇺🇸 US | Intake740i Base Model | View on Amazon |
| AJUSA | 12028200 | 🇺🇸 US | Exhaust740i Base Model | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts for the 2024 BMW 740I come from AJUSA.
This group includes AJUSA 57051500, AJUSA 12027900 and AJUSA 12028200.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VNE | 4022005 | 🇺🇸 US | 740i Base ModelOil Pump Control Valve | View on Amazon |
| WELLS | 2T1249 | 🇺🇸 US | 740i Base Model | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2024 BMW 740I come from 2 brands — VNE and WELLS.
Listed part numbers: VNE 4022005 and WELLS 2T1249.
Buying Engine Parts for a 2024 BMW 740I
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 3.0L L6 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil .
Frequently Asked Questions
How many engine parts fit the 2024 BMW 740I?
Our catalog currently lists 48 engine parts for the 2024 BMW 740I across 23 subcategories and 20 brands, covering the 3.0L L6 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2024 BMW 740I?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2024 BMW 740I?
Oil rows on this page include SAE 0W-20 and SAE 0W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 BMW 740I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2024 BMW 740I?
Every part on this page is matched to the 3.0L L6 Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2024 BMW 740I
Engine Parts for Other BMW 740I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.