2025 BMW 740I Engine Parts

Engine:
3.0L L6 Turbocharged

The 2025 BMW 740I has 27 engine parts with verified fitment on this page — 10 part types and 18 brands, covering the 3.0L L6 Turbocharged engine. Each part includes a manufacturer part number and application notes.

On the 2025 BMW 740I, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 17 parts of the 27 listed are Oil Filter (9 parts), Oil (6 parts) and Intake Manifold Gasket (2 parts). The other 7 part types cover the remaining 10 parts.

Harmonic Balancer Bolt

Brand Part Number Markets Notes Buy
REIN HWB0074
🇺🇸 US
10 x 65mm
View on
Amazon

This table covers the Harmonic Balancer bolts.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
ELRING 076500
🇺🇸 US
740i Base Model
View on
Amazon
ELRING B26210
🇺🇸 US
Material: FPM (Fluoride Rubber)
Fitment notes — ELRING B26210
Material: FPM (Fluoride Rubber)
740i Base Model
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil

Summary: Notes list SAE 0W-20 and SAE 0W-30. Confirm the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and MOBIL.

Brand Part Number Markets Notes Buy
LIQUI MOLY Popular 22044
🇺🇸 US
Top Tec 6600 0W-201 Liter
View on
Amazon
LIQUI MOLY Popular 22046
🇺🇸 US
Top Tec 6600 0W-205 Liter
View on
Amazon
LIQUI MOLY 22048
🇺🇸 US
Top Tec 6600 0W-2020 Liter
View on
Amazon
MOBIL 127568
🇺🇸 US
ESP 5W30 1 Quart
View on
Amazon
VALVOLINE 888048
🇺🇸 US
European Vehicle Full Synthetic SAE 0W-201 Quart
View on
Amazon
VALVOLINE 893931
🇺🇸 US
European Vehicle Full Synthetic SAE 0W-301 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Drain Plug

Brand Part Number Markets Notes Buy
DORMAN 090088
🇺🇸 US
MetalStandard
Fitment notes — DORMAN 090088
MetalStandardThread SizeM12-1.50Under-Head Length: 16.95mmHead Size: 17mmHead Style: Hex
740i Base Model
View on
Amazon
REIN HWU1041
🇺🇸 US
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Filler Cap

Brand Part Number Markets Notes Buy
MOTORAD MO214
🇺🇸 US
740i Base Model
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
FVP G0342
🇺🇸 US
Original Equipment (OE) Part Number 11427826799
View on
Amazon
PRO-TEC PXL10342
🇺🇸 US
View on
Amazon
ULTRA-POWER 51186
🇺🇸 US 🇨🇦 CA
Orig Equipment #11-42 1-745 390
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL M1C457A
🇺🇸 US
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HENGST Popular E859HD352
🇺🇸 US
Includes Gasket SetCartridge
View on
Amazon
MANN Popular HU6022Z
🇺🇸 US
Synthetic Oil Application. Premium filter recommended
View on
Amazon
HASTINGS / BALDWIN P40076
🇺🇸 US
Fits 740i xDriv
Fitment notes — HASTINGS / BALDWIN P40076
Fits:
740i xDriv
or:
740i Base ModelElement
View on
Amazon
VARIOUS MFR PG99256EX
🇺🇸 US
Extended Life
View on
Amazon
WIX WL10342
🇺🇸 US
Factory filled synthetic oil
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Cover

Brand Part Number Markets Notes Buy
MOTORAD MO388
🇺🇸 US
View on
Amazon
REIN CPL0070
🇺🇸 US
View on
Amazon

This table covers the Oil Filter covers.

Oil Filter Housing

Brand Part Number Markets Notes Buy
HENGST H811H
🇺🇸 US
740i Base Modelwith E859H D352 Filter, Oil Cooler and Bolts/Screws
View on
Amazon

This table covers the Oil Filter housings.

Valve Cover

Brand Part Number Markets Notes Buy
SKP SK743462
🇺🇸 US
View on
Amazon

This table covers the Valve covers.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
VNE 4022005
🇺🇸 US
740i Base ModelOil Pump Control Valve
View on
Amazon
WELLS 2T1249
🇺🇸 US
740i Base Model
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2025 BMW 740I

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 3.0L L6 Turbocharged engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Oil .

Frequently Asked Questions

How many engine parts fit the 2025 BMW 740I?

Our catalog currently lists 27 engine parts for the 2025 BMW 740I across 10 subcategories and 18 brands, covering the 3.0L L6 Turbocharged engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 2025 BMW 740I?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2025 BMW 740I?

Oil rows on this page include SAE 0W-20 and SAE 0W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW 740I was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2025 BMW 740I?

Every part on this page is matched to the 3.0L L6 Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2025 BMW 740I

Engine Parts for Other BMW 740I Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.