2006 Chrysler Cirrus Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

11 Coolant / Antifreeze parts for the 2006 Chrysler Cirrus come from 5 brands — PRESTONE, PEAK, VALVOLINE and 2 other brands. The "Popular" part is FVP MV5050GAL. Every part fits both the 2.4L L4 Turbocharged and the 2.7L V6.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, VALVOLINE supplies 1 part: rated for severe service. A representative part number is VALVOLINE ZXG051.

In the Premium grade, PRESTONE and PEAK supply 4 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, AISIN supplies 1 part: built to original-equipment specification. A representative part number is AISIN ACD005.

This table covers the bleeders used to purge air from the coolant circuit. Read more

2 Coolant Air Bleeder parts are listed for the 2006 Chrysler Cirrus, from DORMAN and SKP.

Part numbers include DORMAN 902302 and SKP SK902302.

This table covers the Coolant filler necks. Read more

One part is listed for the 2006 Chrysler Cirrus — SKP SK902863.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

2 Coolant Reservoir parts are listed for the 2006 Chrysler Cirrus, from DORMAN and GPD.

This group includes DORMAN 603474 and GPD 2411363.

This table covers the adapters used to pressure-test this cooling system. Read more

This group shows a single part: MOTORAD 3003.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

10 Radiator parts for the 2006 Chrysler Cirrus come from 6 brands — SPECTRA PREMIUM, AGILITY, FVP and 3 other brands. The "Popular" part is CSF 3097. 1 part fits every engine; the other 9 are engine-specific.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

2 Radiator Cap parts for the 2006 Chrysler Cirrus come from MOTORAD. Every part fits both the 2.4L L4 Turbocharged and the 2.7L V6.

In the Locking Replacement grade, MOTORAD supplies 1 part: grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. A representative part number is MOTORAD ST18.

Standard Replacement: 1 part, from MOTORAD. A representative part number is MOTORAD T18.

Listed part numbers: MOTORAD ST18 and MOTORAD T18.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2006 Chrysler Cirrus — DORMAN 963141D.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

4 Temperature Sender / Sensor parts for the 2006 Chrysler Cirrus come from 3 brands — UNITED MOTOR PRODUCTS, HOLSTEIN and STANDARD MOTOR PRODUCTS.

The Economy section: 2 options from HOLSTEIN and UNITED MOTOR PRODUCTS. HOLSTEIN 2CTS0059 is listed in this group.

Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS TX205.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include HOLSTEIN 2CTS0059, UNITED MOTOR PRODUCTS CTS225 and STANDARD MOTOR PRODUCTS TX205, among others listed above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

5 Thermostat parts are listed for the 2006 Chrysler Cirrus, from MOTORAD and FVP. MOTORAD 449190 carries the "Popular" badge. All of them fit every engine offered in the 2006 Cirrus.

The Heavy Duty section: 1 option from MOTORAD. MOTORAD 5449190 is listed in this group.

The Premium section: 1 option from MOTORAD. MOTORAD 7449190 is listed in this group.

The Standard Replacement section: 3 options from MOTORAD and FVP. MOTORAD 449190 is listed in this group.

Listed part numbers: MOTORAD 449190, MOTORAD 5449190 and MOTORAD 7449190, plus the other parts above.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MOTORAD MG185.

This table covers the housings and outlets the thermostat sits in. Read more

7 Thermostat Housing / Water Outlet parts are listed for the 2006 Chrysler Cirrus, from DORMAN, SKP, MOTORAD and 1 other brand. DORMAN 9023003 carries the "Popular" badge.

Economy: 4 parts, from DORMAN and SKP. A representative part number is DORMAN 9023003.

The Standard Replacement section: 2 options from MOPAR and MOTORAD. MOPAR 4792630AA is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes DORMAN 9023003, DORMAN 902302HP and SKP SKCH5591 and the remaining parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

4 Water Pump parts are listed for the 2006 Chrysler Cirrus, from FVP and US MOTOR WORKS.

Part numbers include FVP US7156 and FVP US7161, among others listed above.

This table covers the Water Pump Inlet tubes. Read more

3 Water Pump Inlet Tube parts are listed for the 2006 Chrysler Cirrus, from DORMAN, MOTORAD and SKP.

Part numbers include DORMAN 626519, MOTORAD CH8028 and SKP SK626519.