1982 Detomaso Pantera Engine Parts

This table covers the Bolt kits. Read more

This group shows a single part: ARP 5549803.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR813SI.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 5 Crankshaft Main Bearing parts for the 1982 Detomaso Pantera. KING ENGINE BEARINGS MB5503AM carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 4 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB5503XP.

The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS MB5503AM is listed in this group.

Listed part numbers: KING ENGINE BEARINGS MB5503AM, KING ENGINE BEARINGS MB5503XP and KING ENGINE BEARINGS MB5503XPX, plus the other parts above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: ARP 1545003.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 1982 Detomaso Pantera, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS88187, NATIONAL 99187 and SCHAEFFLER SR3506, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 1982 Detomaso Pantera, from NATIONAL, BCA, SCHAEFFLER and 1 other brand. NATIONAL 2692 carries the "Popular" badge.

Part numbers include NATIONAL 2692, BCA NS2692 and NATIONAL 5108, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: ARP 1543604.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 611032800.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: MAHLE / CLEVITE 3428SH.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: VICTOR REINZ 011010301.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 1982 Detomaso Pantera — ARP 1542501.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

5 Harmonic Balancer Repair Sleeve parts are listed for the 1982 Detomaso Pantera, from MAHLE / CLEVITE, NATIONAL, BCA and 1 other brand. NATIONAL 88187 carries the "Popular" badge.

Listed part numbers: NATIONAL 88187, BCA NS88187 and MAHLE / CLEVITE A2262, plus the other parts above.

This table covers the Intake Manifold bolts. Read more

2 Intake Manifold Bolt parts for the 1982 Detomaso Pantera come from ARP.

This group includes ARP 1542004 and ARP 4542004.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

FRAM supplies the 3 Oil Filter parts for the 1982 Detomaso Pantera.

In the Economy grade, FRAM supplies 1 part: the catalog's value-priced group. A representative part number is FRAM FE8A.

In the High Performance / Heavy Duty grade, FRAM supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is FRAM TG8A.

The Standard Replacement section: 1 option from FRAM. FRAM PH8A is listed in this group.

Part numbers include FRAM FE8A, FRAM TG8A and FRAM PH8A.

This table covers the Oil Pan bolts. Read more

ARP supplies both parts for the 1982 Detomaso Pantera.

Part numbers include ARP 2541802 and ARP 2541901.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

MAHLE / CLEVITE supplies both parts for the 1982 Detomaso Pantera.

Listed part numbers: MAHLE / CLEVITE OS30541 and MAHLE / CLEVITE OS32333.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE B25211.

This table covers the rings that seal each piston to the cylinder wall. Read more

5 Piston Ring parts for the 1982 Detomaso Pantera come from MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE 40564CP.

In the Premium grade, MAHLE / CLEVITE supplies 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is MAHLE / CLEVITE 40564CP.

Standard Replacement: 2 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE S50564CP.

Listed part numbers: MAHLE / CLEVITE 40564CP, MAHLE / CLEVITE S40564CP and MAHLE / CLEVITE 40451, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

VICTOR REINZ supplies both parts for the 1982 Detomaso Pantera.

This group includes VICTOR REINZ 151016901 and VICTOR REINZ 151026601.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1982 Detomaso Pantera — MAHLE / CLEVITE 46293.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1982 Detomaso Pantera — VICTOR REINZ 151050901.