1987 Detomaso Pantera Engine Parts

This table covers the Bolt kits. Read more

One part is listed for the 1987 Detomaso Pantera — ARP 5549803.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 3 Connecting Rod Bearing parts for the 1987 Detomaso Pantera.

In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR814XPN.

The Standard Replacement section lists 1 option from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS CR814SI is listed in this group.

Listed part numbers: KING ENGINE BEARINGS CR814XPN, KING ENGINE BEARINGS CR814XPNX and KING ENGINE BEARINGS CR814SI.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 1987 Detomaso Pantera, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO CS85487, FEL-PRO CS85483 and VICTOR REINZ 081009501, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 1987 Detomaso Pantera come from KING ENGINE BEARINGS.

The High Performance section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5505XPX is listed in this group.

Standard Replacement: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5505SI.

Part numbers include KING ENGINE BEARINGS MB5505XPX, KING ENGINE BEARINGS MB5505XP and KING ENGINE BEARINGS MB5505SI.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

ARP supplies both parts for the 1987 Detomaso Pantera.

Listed part numbers: ARP 1545001 and ARP 1545003.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1987 Detomaso Pantera come from 6 brands — BCA, NATIONAL, FEL-PRO and 3 other brands. The "Popular" part is BCA NS88187.

Part numbers include BCA NS88187, NATIONAL 99187 and FEL-PRO 16251, among others listed above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711454000.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts for the 1987 Detomaso Pantera come from 7 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 4 other brands. The "Popular" part is FEL-PRO BS40592.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 1987 Detomaso Pantera — ARP 1543603.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 1987 Detomaso Pantera, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. FEL-PRO 9333PT1 carries the "Popular" badge.

This group includes FEL-PRO 9333PT1, FEL-PRO 8548PT2 and MAHLE / CLEVITE 3428 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 1987 Detomaso Pantera, from FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. FEL-PRO HS8548PT9 carries the "Popular" badge.

This group includes FEL-PRO HS8548PT9, FEL-PRO HS8548PT6 and MAHLE / CLEVITE HS3428R and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

2 Cylinder Head Spacer Shim parts are listed for the 1987 Detomaso Pantera, from MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include MAHLE / CLEVITE 3428SH and VICTOR REINZ 711638100.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

4 Harmonic Balancer Repair Sleeve parts for the 1987 Detomaso Pantera come from 4 brands — BCA, MAHLE / CLEVITE, NATIONAL and 1 other brand.

This group includes BCA NS88187, MAHLE / CLEVITE 66595RS and NATIONAL 88187 and the remaining parts above.

This table covers the Intake Manifold bolts. Read more

ARP supplies the 3 Intake Manifold Bolt parts for the 1987 Detomaso Pantera.

Listed part numbers: ARP 1542001, ARP 4542001 and ARP 4542101.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 1987 Detomaso Pantera, from FEL-PRO, MAHLE / CLEVITE, ULTRA-POWER and 1 other brand.

Part numbers include FEL-PRO MS90361 and MAHLE / CLEVITE MS15202, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts are listed for the 1987 Detomaso Pantera, from FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 70822 and VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

3 Oil Filter parts for the 1987 Detomaso Pantera come from FRAM.

The Economy section lists 1 option from FRAM — the catalog's value-priced group. FRAM FE8A is listed in this group.

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 1 part, from FRAM. A representative part number is FRAM PH8A.

This group includes FRAM FE8A, FRAM TG8A and FRAM PH8A.

This table covers the Oil Pan bolts. Read more

2 Oil Pan Bolt parts for the 1987 Detomaso Pantera come from ARP.

Listed part numbers: ARP 2541802 and ARP 2541901.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Pan Gasket parts for the 1987 Detomaso Pantera come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO OS30214C.

Part numbers include FEL-PRO OS30214C, FEL-PRO OS30616R and FEL-PRO OS30214T, among others listed above.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Gasket parts are listed for the 1987 Detomaso Pantera, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 70141 and VICTOR REINZ 711455400.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pump Pickup Tube Gasket parts are listed for the 1987 Detomaso Pantera, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO 72516, MAHLE / CLEVITE B26151 and VICTOR REINZ 711350300.

This table covers the rings that seal each piston to the cylinder wall. Read more

MAHLE / CLEVITE supplies the 5 Piston Ring parts for the 1987 Detomaso Pantera. MAHLE / CLEVITE 40564CP carries the "Popular" badge.

The Premium section lists 3 options from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 40564CP is listed in this group.

The Standard Replacement section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE S50564CP is listed in this group.

Listed part numbers: MAHLE / CLEVITE 40564CP, MAHLE / CLEVITE S40564CP and MAHLE / CLEVITE 40451, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Timing Cover Gasket parts for the 1987 Detomaso Pantera come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO TCS45449.

This group includes FEL-PRO TCS45449, FEL-PRO TCS45450 and MAHLE / CLEVITE T27802 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 1987 Detomaso Pantera come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 16213 and VICTOR REINZ 711346500.

This table covers the Timing Cover Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

This group shows a single part: VICTOR REINZ 711541700.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 46293.

This table covers the Timing Seal kits. Read more

One part is listed for the 1987 Detomaso Pantera — MAGNUM BS23022.

This table covers the Valve covers. Read more

One part is listed for the 1987 Detomaso Pantera — ENGINE PRO 311684.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Valve Cover Gasket parts for the 1987 Detomaso Pantera come from 3 brands — FEL-PRO, VICTOR REINZ and MAHLE / CLEVITE. The "Popular" part is FEL-PRO VS13264T.

Premium: 2 parts, from FEL-PRO and VICTOR REINZ. A representative part number is FEL-PRO VS13264T.

Standard Replacement: 7 parts, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. A representative part number is FEL-PRO VS50029C.

Part numbers include FEL-PRO VS13264T, VICTOR REINZ 151064301 and FEL-PRO VS50029C, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 1987 Detomaso Pantera come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is FEL-PRO SS70070.

This group includes FEL-PRO SS70070, FEL-PRO SS70373 and MAHLE / CLEVITE SS45418 and the remaining parts above.