1985 Detomaso Pantera Engine Parts

This table covers the Bolt kits. Read more

One part is listed for the 1985 Detomaso Pantera — ARP 5549803.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1985 Detomaso Pantera — KING ENGINE BEARINGS CR813SI.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 1985 Detomaso Pantera come from KING ENGINE BEARINGS. The "Popular" part is KING ENGINE BEARINGS MB5503AM.

The High Performance section lists 4 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS MB5503XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS MB5503AM.

Part numbers include KING ENGINE BEARINGS MB5503AM, KING ENGINE BEARINGS MB5503XP and KING ENGINE BEARINGS MB5503XPX, among others listed above.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 1985 Detomaso Pantera — ARP 1545003.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 1985 Detomaso Pantera come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS88187, NATIONAL 99187 and SCHAEFFLER SR3506, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts for the 1985 Detomaso Pantera come from 6 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 3 other brands. The "Popular" part is NATIONAL 2692.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 1985 Detomaso Pantera — ARP 1543604.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1985 Detomaso Pantera — VICTOR REINZ 611032800.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 1985 Detomaso Pantera — MAHLE / CLEVITE 3428SH.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: ARP 1542501.

This table covers the wear sleeves used to restore a Harmonic Balancer seal surface. Read more

5 Harmonic Balancer Repair Sleeve parts for the 1985 Detomaso Pantera come from 4 brands — MAHLE / CLEVITE, NATIONAL, BCA and 1 other brand. The "Popular" part is NATIONAL 88187.

Part numbers include NATIONAL 88187, BCA NS88187 and MAHLE / CLEVITE A2262, among others listed above.

This table covers the Intake Manifold bolts. Read more

ARP supplies both parts for the 1985 Detomaso Pantera.

This group includes ARP 1542004 and ARP 4542004.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1985 Detomaso Pantera — VICTOR REINZ 711346200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

3 Oil Filter parts for the 1985 Detomaso Pantera come from FRAM.

The Economy section lists 1 option from FRAM — the catalog's value-priced group. FRAM FE8A is listed in this group.

The High Performance / Heavy Duty section lists 1 option from FRAM — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM TG8A is listed in this group.

Standard Replacement: 1 part, from FRAM. A representative part number is FRAM PH8A.

Listed part numbers: FRAM FE8A, FRAM TG8A and FRAM PH8A.

This table covers the Oil Pan bolts. Read more

2 Oil Pan Bolt parts for the 1985 Detomaso Pantera come from ARP.

This group includes ARP 2541802 and ARP 2541901.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts for the 1985 Detomaso Pantera come from MAHLE / CLEVITE.

This group includes MAHLE / CLEVITE OS30541 and MAHLE / CLEVITE OS32333.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1985 Detomaso Pantera — MAHLE / CLEVITE B25211.

This table covers the rings that seal each piston to the cylinder wall. Read more

MAHLE / CLEVITE supplies the 5 Piston Ring parts for the 1985 Detomaso Pantera. MAHLE / CLEVITE 40564CP carries the "Popular" badge.

The Premium section lists 3 options from MAHLE / CLEVITE — a step above OE specification in materials, tolerances or warranty terms. MAHLE / CLEVITE 40564CP is listed in this group.

The Standard Replacement section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE S50564CP is listed in this group.

Part numbers include MAHLE / CLEVITE 40564CP, MAHLE / CLEVITE S40564CP and MAHLE / CLEVITE 40451, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts for the 1985 Detomaso Pantera come from VICTOR REINZ.

This group includes VICTOR REINZ 151016901 and VICTOR REINZ 151026601.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 46293.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 151050901.