2008 Dodge Caliber Automatic Transmission Parts

This table covers the transmission or transfer-case housings. Read more

This group shows a single part: MOPAR 68026543AA.

This table covers the Dipstick / Fluid Filler tubes. Read more

3 Dipstick / Fluid Filler Tube parts for the 2008 Dodge Caliber come from 2 brands — DORMAN and MOPAR.

Part numbers include DORMAN 917327, DORMAN 921129 and MOPAR 5273372AF.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR MD000312.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts for the 2008 Dodge Caliber come from 4 brands — ATP, PIONEER, HASTINGS / BALDWIN and 1 other brand. The "Popular" part is PIONEER 745325.

Listed part numbers: PIONEER 745325, ATP B429 and ATP B235, plus the other parts above.

This table covers the flexplates that connect the crankshaft to the torque converter. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 4736238AA.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

3 Fluid Cooler parts for the 2008 Dodge Caliber come from 3 brands — GPD, SKP and SPECTRA PREMIUM.

Listed part numbers: GPD 2611349, SKP SKTOC077 and SPECTRA PREMIUM FC1323T.

This table covers the Fluid Cooler Control valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2008 Dodge Caliber — DORMAN 624654.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Fluid Cooler Line / Hose parts for the 2008 Dodge Caliber come from 2 brands — DORMAN and SUNSONG.

This group includes DORMAN 624752, DORMAN 624753 and SUNSONG 5802127.

This table covers the pans that hold automatic-transmission fluid. Read more

4 Fluid Pan parts are listed for the 2008 Dodge Caliber, from ATP, SKP, SPECTRA PREMIUM and 1 other brand.

This group includes ATP 103369, SKP SK265834 and SPECTRA PREMIUM TP0834 and the remaining parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Fluid Pan Gasket parts for the 2008 Dodge Caliber come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO TOS18755, MAHLE / CLEVITE W32836 and VICTOR REINZ 711496600.

This table covers the Fluid Pan magnets. Read more

One part is listed for the 2008 Dodge Caliber — MOPAR 4761078AB.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Fluid Pump Seal parts are listed for the 2008 Dodge Caliber, from SKF and WJB / INMOTION PARTS.

Part numbers include SKF 20072A and WJB / INMOTION PARTS WS20072A.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2008 Dodge Caliber, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Output Shaft Bearing parts are listed for the 2008 Dodge Caliber, from WJB / INMOTION PARTS, BCA and NATIONAL.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WT32008X.

The Standard Replacement section lists 2 options from BCA and NATIONAL — built to original-equipment specification. BCA NB32008 is listed in this group.

This group includes WJB / INMOTION PARTS WT32008X, BCA NB32008 and NATIONAL 32008.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts for the 2008 Dodge Caliber come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS710598, NATIONAL 710598 and SCHAEFFLER SS2658 and the remaining parts above.

This table covers the Pressure Control (EPC) solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ROSTRA 520539.

This table covers the rebuild kits for this assembly. Read more

5 Rebuild Kit parts are listed for the 2008 Dodge Caliber, from PA CARGO and TRANSTEC. TRANSTEC 81000629 carries the "Popular" badge.

In the Banner Kit (Overhaul Kit + Friction Clutch Plates) grade, PA CARGO supplies 2 parts: grouped under the catalog's "Banner Kit (Overhaul Kit + Friction Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK12500BS.

The Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) section lists 1 option from PA CARGO — grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. PA CARGO DK12500B is listed in this group.

In the Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) grade, TRANSTEC and PA CARGO supply 2 parts: grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. A representative part number is TRANSTEC 81000629.

Listed part numbers: TRANSTEC 81000629, PA CARGO DK12500BS and PA CARGO DK12500S, plus the other parts above.

This table covers the Shift cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early. Read more

MOPAR supplies the 4 Shift Cable parts for the 2008 Dodge Caliber.

Part numbers include MOPAR 68024360AA, MOPAR 5038027AB and MOPAR 5038027AD, among others listed above.

This table covers the brackets that mount the Shift Cable. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2008 Dodge Caliber — DORMAN 926169.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2008 Dodge Caliber — SCHAEFFLER SS2111.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Shift Solenoid parts are listed for the 2008 Dodge Caliber, from ROSTRA and BECK/ARNLEY.

This group includes BECK/ARNLEY 0470021, ROSTRA 520540 and ROSTRA 520722.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: ROSTRA 520538.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Torque Converter Shaft Seal parts are listed for the 2008 Dodge Caliber, from NATIONAL, TIMKEN and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710923, TIMKEN SL260359 and WJB / INMOTION PARTS WS710923.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

8 Transmission Fluid parts for the 2008 Dodge Caliber come from 4 brands — PENTOSIN, AISIN, VALVOLINE and 1 other brand. The "Popular" part is AISIN ATFNS2.

The ATF +4 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. PENTOSIN 1058112 is listed in this group.

In the CVT grade, AISIN, VALVOLINE and LUBEGARD supply 3 parts: grouped under the catalog's "CVT" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFNS2.

The ZF Fluid section lists 3 options from PENTOSIN — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. PENTOSIN 1058106 is listed in this group.

Part numbers include AISIN ATFNS2, PENTOSIN 1058112 and PENTOSIN 1058212, among others listed above.

This table covers the conditioners and additives used with this transmission fluid. Read more

This group shows a single part: LUBEGARD 67010.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts are listed for the 2008 Dodge Caliber, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. SKP SKM3134 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM3134.

The Standard Replacement section: 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 3137 is listed in this group.

Listed part numbers: SKP SKM3134, ANCHOR 3137 and DEA / MARMON RIDE CONTROL A5419, plus the other parts above.