2020 Ford Ranger Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

21 Coolant / Antifreeze parts for the 2020 Ford Ranger come from 7 brands — PRESTONE, VALVOLINE, PEAK and 4 other brands. The "Popular" part is FVP MV5050GAL.

In the Compatible With All Colors grade, PRESTONE supplies 1 part: grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. A representative part number is PRESTONE AF3055.

The Economy section lists 4 options from FVP, PEAK, PRESTONE and 1 other brand — the catalog's value-priced group. FVP MV5050GAL is listed in this group.

In the Heavy Duty grade, PRESTONE and VALVOLINE supply 2 parts: rated for severe service. A representative part number is PRESTONE AFC12100.

In the Premium grade, PRESTONE and PEAK supply 5 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is PRESTONE AF2100.

In the Standard Replacement grade, MOTORCRAFT, VALVOLINE, PRESTONE and 3 other brands supply 9 parts: built to original-equipment specification. A representative part number is ACDELCO 105027.

This table covers the hard pipes and extra hoses in the coolant circuit. Read more

3 Coolant Hose / Pipe parts for the 2020 Ford Ranger come from 2 brands — MOTORCRAFT and GATES.

Part numbers include GATES 12514, MOTORCRAFT KM7223 and MOTORCRAFT KM7258.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Coolant Hose / Pipe Seal parts are listed for the 2020 Ford Ranger, from DORMAN, ELRING, FEL-PRO and 1 other brand.

Part numbers include DORMAN 47450, ELRING 027761 and FEL-PRO 36046, among others listed above.

This table covers the Coolant Hose Connector flanges. Read more

This group shows a single part: MOTORCRAFT RH270.

This table covers the seals at the Coolant Hose Connector / Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Ford Ranger — ELRING 027480.

This table covers the overflow / expansion tanks that hold extra coolant. Read more

TECHPRO supplies both parts for the 2020 Ford Ranger.

Part numbers include TECHPRO FO3014185 and TECHPRO FO3014186.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

5 Coolant Reservoir Cap parts are listed for the 2020 Ford Ranger, from MOTORAD, CALORSTAT, GATES and 2 other brands. MOTORAD T57 carries the "Popular" badge.

This group includes MOTORAD T57, CALORSTAT RC0150 and GATES 31549 and the remaining parts above.

This table covers the adapters used to pressure-test this cooling system. Read more

This group shows a single part: MOTORAD 3043.

This table covers the intercoolers that cool turbo or supercharger charge air. Read more

5 Intercooler parts for the 2020 Ford Ranger come from 5 brands — TYC, GPD, MOTORCRAFT and 2 other brands. The "Popular" part is TYC 18137.

Part numbers include TYC 18137, GPD 2711563 and MOTORCRAFT INTCO22, among others listed above.

This table covers the Intercooler Air Hose pipes. Read more

3 Intercooler Air Hose / Pipe parts for the 2020 Ford Ranger come from GATES.

Listed part numbers: GATES 26740, GATES 26741 and GATES 29041.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

12 Radiator parts for the 2020 Ford Ranger come from 11 brands — UAC, GPD, TECHPRO and 8 other brands. The "Popular" part is CSF 3929.

The Economy section: 2 options from GPD and TECHPRO. GPD 13804C is listed in this group.

Standard Replacement: 8 parts, from CSF, DENSO, AGILITY and 5 other brands. A representative part number is CSF 3929.

2 further parts sit outside the graded sections, with the same engine-level match.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

This group shows a single part: MOTORCRAFT RS531.

This table covers the Radiator Fan blades. Typical signs include chatter, streaks, or a skip at the top of the stroke. Confirm left and right lengths in the notes — they are often different. Read more

3 Radiator Fan Blade parts are listed for the 2020 Ford Ranger, from DORMAN, GPD and MOTORCRAFT.

This group includes DORMAN 621970, GPD 2812365 and MOTORCRAFT YA276.

This table covers the Radiator Fan clutches. Typical signs include slip at highway speed, chatter on takeoff, or a pedal that stays low. Resurface or replace the flywheel with the clutch — a heat-checked flywheel wastes the new disc. Read more

5 Radiator Fan Clutch parts for the 2020 Ford Ranger come from 5 brands — FOUR SEASONS, FVP, HAYDEN and 2 other brands. The "Popular" part is FOUR SEASONS 46160.

Listed part numbers: FOUR SEASONS 46160, FVP 22360 and HAYDEN 3500, plus the other parts above.

This table covers the shrouds that duct air through the fan and radiator. Read more

This group shows a single part: VARIOUS MFR FO3110138.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

MOTORCRAFT supplies the 4 Radiator Hose parts for the 2020 Ford Ranger.

Part numbers include MOTORCRAFT KM6572, MOTORCRAFT KM6801 and MOTORCRAFT KM6802, among others listed above.

This table covers the Radiator Upper Air Baffle retainers and clips. Read more

One part is listed for the 2020 Ford Ranger — DORMAN 961364.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

15 Temperature Sender / Sensor parts for the 2020 Ford Ranger come from 9 brands — GPD, HOLSTEIN, MOTORCRAFT and 6 other brands. The "Popular" part is HOLSTEIN 2CTS0298.

The Economy section: 4 options from HOLSTEIN and GPD. HOLSTEIN 2CTS0298 is listed in this group.

Standard Replacement: 8 parts, from MOTORCRAFT, STANDARD MOTOR PRODUCTS, WELLS and 2 other brands. A representative part number is MOTORCRAFT DY1488.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

2 Thermostat parts are listed for the 2020 Ford Ranger, from MOTORAD and MOTORCRAFT.

Listed part numbers: MOTORAD 1270198 and MOTORCRAFT RT1262.

This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Thermostat / Thermostat Housing / Water Outlet Seal parts for the 2020 Ford Ranger come from 4 brands — FEL-PRO, MOTORCRAFT, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 35839.

Listed part numbers: FEL-PRO 35839, MOTORCRAFT RG640 and APEX AWO2247, plus the other parts above.

This table covers the housings and outlets the thermostat sits in. Read more

4 Thermostat Housing / Water Outlet parts are listed for the 2020 Ford Ranger, from FOUR SEASONS, GATES, MOTORAD and 1 other brand.

Listed part numbers: FOUR SEASONS 86315, GATES CO35007 and MOTORAD CH1052, plus the other parts above.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

7 Water Pump parts are listed for the 2020 Ford Ranger, from FVP, US MOTOR WORKS, GATES and 3 other brands. GATES 41228 carries the "Popular" badge.

Economy: 2 parts, from FVP and US MOTOR WORKS. A representative part number is FVP US8200.

The Standard Replacement section: 5 options from GATES, MOTORCRAFT, FVP and 2 other brands. GATES 41228 is listed in this group.

Listed part numbers: GATES 41228 and FVP US8200, plus the other parts above.

This table covers the gaskets between the water pump and the block or housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Water Pump Gasket parts for the 2020 Ford Ranger come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE K33850 and MAHLE / CLEVITE K33855.

This table covers the Water Pump housings. Read more

This group shows a single part: MOTORAD CH3103.