2020 Ford Ranger Drivetrain Parts

This table covers the Axle / Differential assemblies. Read more

5 Axle / Differential Assembly parts for the 2020 Ford Ranger come from DANA.

Listed part numbers: DANA UD44FBRO373ELD29, DANA UD44FBRO373ELD32 and DANA UD44FBRO410ELD29, plus the other parts above.

This table covers the Axle Intermediate Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Ford Ranger — DANA 566111.

This table covers the Axle shafts. Read more

3 Axle Shaft parts for the 2020 Ford Ranger come from USA STANDARD GEAR.

Listed part numbers: USA STANDARD GEAR USA13194, USA STANDARD GEAR USA13192 and USA STANDARD GEAR USA13195.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: USA STANDARD GEAR USA10997.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2020 Ford Ranger — TIMKEN SL260537.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

23 CV Axle parts are listed for the 2020 Ford Ranger, from MOTORCRAFT, GSP, TRAKMOTIVE and 1 other brand. TOP NOTCH TN40055XD carries the "Popular" badge.

The Heavy Duty section lists 4 options from TOP NOTCH and GSP — rated for severe service. TOP NOTCH TN40055XD is listed in this group.

The Standard Replacement section lists 14 options from MOTORCRAFT, GSP, TRAKMOTIVE and 1 other brand — built to original-equipment specification. MOTORCRAFT TX1286 is listed in this group.

5 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

One part is listed for the 2020 Ford Ranger — MOTORCRAFT TX995.

This table covers the carriers that hold the differential gears in the axle. Read more

One part is listed for the 2020 Ford Ranger — USA STANDARD GEAR USA11177.

This table covers the Differential covers. Read more

This group shows a single part: USA STANDARD GEAR USA12302.

This table covers the Differential Cover bolts. Read more

One part is listed for the 2020 Ford Ranger — DANA 10050881.

This table covers the Differential Cover plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DANA 43180.

This table covers the Differential Lock plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

This group shows a single part: USA STANDARD GEAR USA12498.

This table covers the baffles that control oil at the pinion bearings. Read more

This group shows a single part: DANA 10040475.

This table covers the Differential Pinion nuts. Read more

One part is listed for the 2020 Ford Ranger — DANA 2009625.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Differential Pinion Seal parts are listed for the 2020 Ford Ranger, from TIMKEN and SKF.

This group includes SKF 18429A, TIMKEN SL260567 and TIMKEN SL260568.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

2 Differential Rebuild Kit parts for the 2020 Ford Ranger come from USA STANDARD GEAR.

The Master Kit section lists 1 option from USA STANDARD GEAR — grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. USA STANDARD GEAR USA12825 is listed in this group.

In the Standard Kit grade, USA STANDARD GEAR supplies 1 part: grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. A representative part number is USA STANDARD GEAR USA12832.

Listed part numbers: USA STANDARD GEAR USA12825 and USA STANDARD GEAR USA12832.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

One part is listed for the 2020 Ford Ranger — AAM F88355GS.

This table covers the Differential Ring Gear bolts. Read more

One part is listed for the 2020 Ford Ranger — DANA 10008806.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

4 Drive Shaft parts for the 2020 Ford Ranger come from 3 brands — DORMAN, TRAKMOTIVE and WJB / INMOTION PARTS.

Listed part numbers: DORMAN 986918, DORMAN 938003 and TRAKMOTIVE FDP446, plus the other parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A60168.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

15 Gear Oil parts are listed for the 2020 Ford Ranger, from VALVOLINE, LUCAS OIL and MOBIL. MOBIL 104361 carries the "Popular" badge.

In the SAE 75W-90 grade, VALVOLINE and MOBIL supply 8 parts: grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 104361.

In the SAE 80W-90 grade, VALVOLINE and LUCAS OIL supply 7 parts: grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. A representative part number is LUCAS OIL 10043.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

12 Transfer Case Fluid parts are listed for the 2020 Ford Ranger, from VALVOLINE, PENTOSIN, LUCAS OIL and 2 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, VALVOLINE and ACDELCO supply 3 parts: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LUCAS OIL and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

This group shows a single part: MOTORCRAFT MM1429.

This table covers the U-joints in the driveshaft. Read more

7 Universal Joint parts are listed for the 2020 Ford Ranger, from ACDELCO, MOOG and GMB. MOOG 241 carries the "Popular" badge.

The Heavy Duty section: 4 options from ACDELCO and MOOG. MOOG 241 is listed in this group.

The Standard Replacement section: 3 options from ACDELCO and GMB. ACDELCO 45U0103 is listed in this group.

Part numbers include MOOG 241, ACDELCO 45U0109 and ACDELCO 45U0123, among others listed above.