The 2020 Ford Ranger has 19 interior parts with verified fitment on this page — 9 part types and 7 brands, covering all 3 engine options (2.3L L4 Turbocharged, 2.5L L4 and 3.2L L5 DIESEL Turbocharged). Each part includes a manufacturer part number and application notes.
On the 2020 Ford Ranger, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear. Most of the listed parts are Floor Mat (6 parts), Accessory Power Outlet (3 parts) and Accelerator Pedal Position Sensor (2 parts). The other 6 part types cover the remaining 8 parts.
The 2020 Ford Ranger was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
7 brands supply interior parts for the 2020 Ford Ranger, led by MOTORCRAFT (5 parts), DORMAN (4 parts) and 3D (4 parts), plus 4 more brands. Quality grades include All Weather and Carpet.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2020 Ford Ranger. 2 parts have it, including 3D L1FR1221150 (Floor Mat) and 3D L1FR1220150 (Floor Mat). Each part number opens a page with every vehicle that part fits.
Accelerator Pedal Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 3.2L L5 DIESEL Turbocharged | APS654 | 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 3.2L L5 DIESEL Turbocharged | 5S15761 | 🇲🇽 MX | View on Amazon |
This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Accelerator Pedal Position Sensor parts for the 2020 Ford Ranger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.
Part numbers include STANDARD MOTOR PRODUCTS APS654 and WELLS 5S15761.
Accessory Power Outlet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.2L L5 DIESEL Turbocharged | 926331 | 🇲🇽 MX | Center ConsoleAuxiliary | View on Amazon |
| MOTORCRAFT Fits: 3.2L L5 DIESEL Turbocharged | OUT1 | 🇲🇽 MX | Additional Socket Assembly | View on Amazon |
| MOTORCRAFT Fits: 3.2L L5 DIESEL Turbocharged | OUT11 | 🇲🇽 MX | Socket Assembly Additional | View on Amazon |
This table covers the 12-volt power outlets in the cabin.
3 Accessory Power Outlet parts for the 2020 Ford Ranger come from 2 brands — MOTORCRAFT and DORMAN.
Part numbers include DORMAN 926331, MOTORCRAFT OUT1 and MOTORCRAFT OUT11.
Door Panel Retainer / Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.2L L5 DIESEL Turbocharged | 963139D | 🇲🇽 MX | Fits Front9 mm | View on Amazon |
This table covers the Door Panel retainers and clips.
One part is listed for the 2020 Ford Ranger — DORMAN 963139D.
Floor Mat
All Weather
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| 3D Popular Fits: 3.2L L5 DIESEL Turbocharged | L1FR1221150 | 🇲🇽 MX | KAGU Triple Layer Design2 Pieces | View on Amazon |
| 3D Popular Fits: 3.2L L5 DIESEL Turbocharged | L1FR1220150 | 🇲🇽 MX | KAGU Triple Layer Design3 Piece | View on Amazon |
| 3D Fits: 3.2L L5 DIESEL Turbocharged | L1FR0502150 | 🇲🇽 MX | KAGU Triple Layer Design | View on Amazon |
Carpet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| 3D Fits: 3.2L L5 DIESEL Turbocharged | L1FR1220470 | 🇲🇽 MX | Elegant3 Piece | View on Amazon |
| DASH DESIGNS Fits: 3.2L L5 DIESEL Turbocharged | A27490E | 🇲🇽 MX | Endura Custom | View on Amazon |
| DASH DESIGNS Fits: 3.2L L5 DIESEL Turbocharged | B27490E | 🇲🇽 MX | Endura Custom | View on Amazon |
This table covers the floor mats cut for this cabin.
6 Floor Mat parts for the 2020 Ford Ranger come from 2 brands — 3D and DASH DESIGNS. The "Popular" part is 3D L1FR1221150.
In the All Weather grade, 3D supplies 3 parts: grouped under the catalog's "All Weather" designation — the notes column spells out what sets them apart. A representative part number is 3D L1FR1221150.
In the Carpet grade, DASH DESIGNS and 3D supply 3 parts: grouped under the catalog's "Carpet" designation — the notes column spells out what sets them apart. A representative part number is 3D L1FR1220470.
Part numbers include 3D L1FR1221150, 3D L1FR1220150 and 3D L1FR0502150, among others listed above.
Headliner Clip / Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.2L L5 DIESEL Turbocharged | 963139D | 🇲🇽 MX | View on Amazon |
This table covers the Headliner Clip retainers.
One part is listed for the 2020 Ford Ranger — DORMAN 963139D.
Hood Release Cable
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.2L L5 DIESEL Turbocharged | 912565 | 🇲🇽 MX | View on Amazon |
This table covers the Hood Release cables. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.
This group shows a single part: DORMAN 912565.
Power Seat Motor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Fits: 3.2L L5 DIESEL Turbocharged | MM1177 | 🇲🇽 MX | Front Rightwith 6 or 8 Way Power Seat Adjuster | View on Amazon |
| MOTORCRAFT Fits: 3.2L L5 DIESEL Turbocharged | MM1179 | 🇲🇽 MX | Front Leftwith Driver 8 Way Power Seat Adjuster | View on Amazon |
This table covers the Power Seat motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor.
MOTORCRAFT supplies both parts for the 2020 Ford Ranger.
Part numbers include MOTORCRAFT MM1177 and MOTORCRAFT MM1179.
Radio Module Interface
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRA Fits: 3.2L L5 DIESEL Turbocharged | AXTCFD2 | 🇲🇽 MX | Standard Interface - Provides 12 Volt, VSS, Park Brake and ReversePlus Built-In Steering Wheel Control | View on Amazon |
| METRA Fits: 3.2L L5 DIESEL Turbocharged | AXADBXHFD1 | 🇲🇽 MX | 12VFor AXADBX-1/AXADBX-2 | View on Amazon |
This table covers the interfaces that connect an aftermarket radio to the factory harness.
2 Radio Module Interface parts for the 2020 Ford Ranger come from METRA.
This group includes METRA AXTCFD2 and METRA AXADBXHFD1.
Seat Heater Pad
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORCRAFT Fits: 3.2L L5 DIESEL Turbocharged | STHA20 | 🇲🇽 MX | Front | View on Amazon |
This table covers the Seat Heater pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on.
One part is listed for the 2020 Ford Ranger — MOTORCRAFT STHA20.
Buying Interior Parts for a 2020 Ford Ranger
On this vehicle, the interior covers cabin hardware — seat components, handles, switch bezels, carpet, pedals and the pieces that take daily wear.
- Match the engine first. Every interior part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Floor Mat and Accessory Power Outlet .
Frequently Asked Questions
How many interior parts fit the 2020 Ford Ranger?
Our catalog currently lists 19 interior parts for the 2020 Ford Ranger across 9 subcategories and 7 brands, covering all 3 engine options (2.3L L4 Turbocharged, 2.5L L4 and 3.2L L5 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do interior parts differ between 2020 Ford Ranger engines?
Yes. Every interior part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of interior problems on a 2020 Ford Ranger?
Common symptoms include a door handle that works only from outside, sagging headliner, a window switch that needs two presses, or seat adjusters that stick. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the retainer clips with any panel removal — they are cheap insurance against squeaks.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Ford Ranger was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Ford Ranger?
First match the engine — each row shows which engine(s) the part fits. Then interior plastics are often color- and trim-specific — check the notes column against your trim level before ordering. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Ford Ranger
Interior Parts for Other Ford Ranger Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.