This page lists 26 engine parts for the 2020 Ford Ranger, across 15 part types, covering all 3 engine options (2.3L L4 Turbocharged, 2.5L L4 and 3.2L L5 DIESEL Turbocharged). Every part shows its brand, manufacturer part number and fitment notes.
On the 2020 Ford Ranger, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 12 parts of the 26 listed are Oil Drain Plug (6 parts), Cylinder Head Gasket (3 parts) and Turbocharger Mounting Hardware (3 parts). The other 12 part types cover the remaining 14 parts.
The 2020 Ford Ranger was sold with 3 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
6 brands supply engine parts for the 2020 Ford Ranger, led by ELRING (19 parts), AGS (2 parts) and DORMAN (2 parts), plus 3 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2020 Ford Ranger. 2 parts have it, including AGS ODP00007 (Oil Drain Plug) and DORMAN 090053 (Oil Drain Plug). Each part number opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 764750 | 🇲🇽 MX | with Crankshaft Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2020 Ford Ranger — ELRING 764750.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 026782 | 🇲🇽 MX | Material: PTFE (polytetrafluoroethylene) | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 026812 | 🇲🇽 MX | with Mounting SleeveMaterial: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts for the 2020 Ford Ranger come from ELRING.
This group includes ELRING 026782 and ELRING 026812.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 823290 | 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
One part is listed for the 2020 Ford Ranger — ELRING 823290.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 547490 | 🇲🇽 MX | Installed Thickness [MM]: 1 | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 547500 | 🇲🇽 MX | Installed Thickness [MM]: 1,15 | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 547510 | 🇲🇽 MX | Installed Thickness [MM]: 1,2 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
ELRING supplies the 3 Cylinder Head Gasket parts for the 2020 Ford Ranger.
Part numbers include ELRING 547490, ELRING 547500 and ELRING 547510.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 764470 | 🇲🇽 MX | without Cylinder Head Gasketwith valve stem seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
One part is listed for the 2020 Ford Ranger — ELRING 764470.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 027150 | 🇲🇽 MX | Material: Metaloseal (VMQ) | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 Ford Ranger — ELRING 027150.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 3.2L L5 DIESEL Turbocharged | 787301 | 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-301 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
This group shows a single part: VALVOLINE 787301.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Popular Fits: 3.2L L5 DIESEL Turbocharged | ODP00007 | 🇲🇽 MX | M14x1.50 | View on Amazon |
| DORMAN Popular Fits: 3.2L L5 DIESEL Turbocharged | 090053 | 🇲🇽 MX | MetalPilot Point | View on Amazon |
| AGS Fits: 3.2L L5 DIESEL Turbocharged | ODP00012 | 🇲🇽 MX | M16x1.50 | View on Amazon |
| DORMAN Fits: 3.2L L5 DIESEL Turbocharged | 090115 | 🇲🇽 MX | Pilot PointM14-1.50 | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 012001 | 🇲🇽 MX | with Seal RingSpanner Size: 13 mm | View on Amazon |
| SKP Fits: 3.2L L5 DIESEL Turbocharged | SK090053CD | 🇲🇽 MX | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts for the 2020 Ford Ranger come from 4 brands — AGS, DORMAN, ELRING and 1 other brand. The "Popular" part is AGS ODP00007.
Part numbers include AGS ODP00007, DORMAN 090053 and AGS ODP00012, among others listed above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 176090 | 🇲🇽 MX | Material: ElastomerShape: Asymmetrical | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 Ford Ranger — ELRING 176090.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 876260 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 876260.
Timing Chain Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 568970 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Timing Chain Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 Ford Ranger — ELRING 568970.
Turbocharger Diverter / Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 3.2L L5 DIESEL Turbocharged | 704615030 | 🇲🇽 MX | Electric | View on Amazon |
This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: PIERBURG 704615030.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 584560 | 🇲🇽 MX | StudThread Size: M8X1,25x25 | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 372170 | 🇲🇽 MX | StudThread Size: M10X1,5x30 | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 764800 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual,with Bolts/Screws | View on Amazon |
This table covers the fasteners that mount the turbocharger.
ELRING supplies the 3 Turbocharger Mounting Hardware parts for the 2020 Ford Ranger.
Part numbers include ELRING 584560, ELRING 372170 and ELRING 764800.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 469690 | 🇲🇽 MX | Upper | View on Amazon |
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 928210 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 2020 Ford Ranger come from ELRING.
Listed part numbers: ELRING 469690 and ELRING 928210.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.2L L5 DIESEL Turbocharged | 027740 | 🇲🇽 MX | Inner Diameter [MM]: 12Outside Diameter: 24.2 mm | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING 027740.
Buying Engine Parts for a 2020 Ford Ranger
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Drain Plug and Cylinder Head Gasket .
Frequently Asked Questions
How many engine parts fit the 2020 Ford Ranger?
Our catalog currently lists 26 engine parts for the 2020 Ford Ranger across 15 subcategories and 6 brands, covering all 3 engine options (2.3L L4 Turbocharged, 2.5L L4 and 3.2L L5 DIESEL Turbocharged). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2020 Ford Ranger engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2020 Ford Ranger?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2020 Ford Ranger?
Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Ford Ranger was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Ford Ranger?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Ford Ranger
Engine Parts for Other Ford Ranger Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.