2024 Ford Ranger Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE GS34060.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Conversion / Lower Gasket Set parts for the 2024 Ford Ranger.

Part numbers include AJUSA 54344600, AJUSA 54345300 and AJUSA 54351200.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 2024 Ford Ranger come from 5 brands — AJUSA, ELRING, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO TCS46117.

This table covers the bolts that clamp the cylinder head to the block. Read more

AJUSA supplies the 3 Cylinder Head Bolt parts for the 2024 Ford Ranger.

This group includes AJUSA 81071700, AJUSA 81035200 and AJUSA 81071300.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2024 Ford Ranger, from AJUSA, FEL-PRO, ELRING and 1 other brand. FEL-PRO 26941PT carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Cylinder Head Gasket Set parts for the 2024 Ford Ranger.

Listed part numbers: AJUSA 53110800, AJUSA 52672300 and AJUSA 52690500.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts for the 2024 Ford Ranger come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TX365 and WELLS 5S17577.

This table covers the Engine covers. Read more

One part is listed for the 2024 Ford Ranger — TECHPRO FO1228206.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies the 3 Engine Kit Gasket Set parts for the 2024 Ford Ranger.

This group includes AJUSA 51116400, AJUSA 50596700 and AJUSA 50610400.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2024 Ford Ranger come from 3 brands — MELLING, QUALCAST and SBI.

This group includes MELLING V5823, MELLING V3497 and QUALCAST 1013497 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2024 Ford Ranger, from ATP and DORMAN.

Part numbers include ATP 102450 and DORMAN 594726.

This table covers the Harmonic Balancer bolts. Read more

3 Harmonic Balancer Bolt parts for the 2024 Ford Ranger come from 2 brands — DORMAN and SKP.

This group includes DORMAN 926885, DORMAN 595002 and SKP SK926885.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2024 Ford Ranger, from AJUSA and ELRING.

This group includes AJUSA 13352300, AJUSA 13270500 and AJUSA 77088900 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts for the 2024 Ford Ranger come from 2 brands — FEL-PRO and ULTRA-POWER.

Listed part numbers: FEL-PRO MS97205, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2024 Ford Ranger come from 3 brands — SBI, MELLING and ENGINETECH.

Part numbers include ENGINETECH V2730, MELLING V5824 and MELLING V3428, among others listed above.

This table covers the long-block engine assemblies (block, crank, heads). Read more

One part is listed for the 2024 Ford Ranger — MOTORCRAFT N2DZ6006C.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2024 Ford Ranger come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR. The "Popular" part is ANCHOR 3715.

This group includes ANCHOR 3715, ANCHOR 3716 and DEA / MARMON RIDE CONTROL A20190 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts for the 2024 Ford Ranger come from 7 brands — VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. The "Popular" part is MOBIL 125195. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 19 parts from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2024 Ford Ranger come from 3 brands — DORMAN, GPD and MOTORCRAFT.

This group includes DORMAN 918625, GPD 2611478 and MOTORCRAFT YOC16.

This table covers the Oil Dipstick tubes. Read more

3 Oil Dipstick / Tube parts for the 2024 Ford Ranger come from MOTORCRAFT.

This group includes MOTORCRAFT EDPS73, MOTORCRAFT EDPS42 and MOTORCRAFT EDPS74.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2024 Ford Ranger come from DORMAN.

Part numbers include DORMAN 090034, DORMAN 090175 and DORMAN 097826, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2024 Ford Ranger — ELRING 097570.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2024 Ford Ranger come from 2 brands — MOTORAD and MOTORCRAFT.

Listed part numbers: MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

31 Oil Filter parts for the 2024 Ford Ranger come from 14 brands — VARIOUS MFR, MOBIL, FRAM and 11 other brands. The "Popular" part is PRO-TEC PXL10050. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Standard Replacement the largest group at 16 parts from MOTORCRAFT, HENGST, WIX and 6 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2024 Ford Ranger — VICTOR REINZ 712028400.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts are listed for the 2024 Ford Ranger, from DORMAN and MOTORAD.

Part numbers include DORMAN 921157 and MOTORAD MO363.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2024 Ford Ranger — SKP SK7A194.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 2024 Ford Ranger come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 14124700, AJUSA 14124900 and ELRING 190800.

This table covers the pickup tubes and screens that feed the oil pump. Read more

MOTORCRAFT supplies the 3 Oil Pump Pickup Tube / Screen parts for the 2024 Ford Ranger.

Part numbers include MOTORCRAFT EPT1, MOTORCRAFT EPT2 and MOTORCRAFT EPT3.

This table covers the rocker arms that transfer cam motion to the valves. Read more

2 Rocker Arm parts for the 2024 Ford Ranger come from 2 brands — INA and SBI.

Listed part numbers: INA VF02551 and SBI 1801342.

This table covers the Short blocks. Read more

One part is listed for the 2024 Ford Ranger — MOTORCRAFT RB3Z6009A.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2024 Ford Ranger, from MELLING and CLOYES.

This group includes CLOYES C567, MELLING 1078 and MELLING 959.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts for the 2024 Ford Ranger come from 2 brands — CLOYES and MELLING.

This group includes CLOYES 90567S and MELLING 31078S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2024 Ford Ranger, from MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BG7040, MELLING BT7040 and MELLING BG7026 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts for the 2024 Ford Ranger come from 3 brands — MELLING, INA and PREFERRED COMPONENTS INC.

This group includes INA ZT0692, MELLING BT7051 and MELLING BT7026 and the remaining parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2024 Ford Ranger come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE 68024 and VICTOR REINZ 811049600.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2024 Ford Ranger come from 2 brands — CLOYES and MELLING.

This group includes CLOYES S1205 and MELLING S1315.

This table covers the turbochargers that compress intake air. Read more

5 Turbocharger parts for the 2024 Ford Ranger come from 3 brands — GPD, MOTORCRAFT and ROTOMASTER.

This group includes GPD 2511865, GPD 2513001 and GPD 2513002 and the remaining parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts are listed for the 2024 Ford Ranger, from WELLS and MOTORCRAFT.

In the Economy grade, WELLS supplies 1 part: the catalog's value-priced group. A representative part number is WELLS 5S15716.

The Standard Replacement section lists 1 option from MOTORCRAFT — built to original-equipment specification. MOTORCRAFT CX2621 is listed in this group.

Listed part numbers: WELLS 5S15716 and MOTORCRAFT CX2621.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Turbocharger Gasket parts are listed for the 2024 Ford Ranger, from AJUSA, GPD and ELRING.

Part numbers include AJUSA JTC12402, AJUSA JTC12850 and AJUSA JTC12896, among others listed above.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

7 Turbocharger Oil Line parts for the 2024 Ford Ranger come from 3 brands — AJUSA, DORMAN and MOTORCRAFT.

This group includes AJUSA OP11407, AJUSA OP11434 and AJUSA OP11406 and the remaining parts above.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33892.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

This group shows a single part: BOSCH 0280751042.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2024 Ford Ranger come from AJUSA.

This group includes AJUSA 11153200, AJUSA 56099300 and AJUSA 56104900 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403215.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

10 Valve Lifter parts for the 2024 Ford Ranger come from 5 brands — MELLING, AJUSA, ENGINETECH and 2 other brands. The "Popular" part is MELLING JB7534.

This table covers the Valve seats. Read more

SBI supplies both parts for the 2024 Ford Ranger.

Part numbers include SBI SB1140E1 and SBI SB1297E1.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

MELLING supplies the 3 Valve Spring parts for the 2024 Ford Ranger.

Part numbers include MELLING VS2496, MELLING VS2495 and MELLING VS1666.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2024 Ford Ranger — MELLING VSR714.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

5 Valve Spring Retainer Keeper parts are listed for the 2024 Ford Ranger, from MELLING, SBI and ENGINETECH.

Part numbers include ENGINETECH EPF1140, MELLING VL1125 and MELLING VL1140, among others listed above.