2023 Ford Ranger Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2023 Ford Ranger come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.

Listed part numbers: AJUSA 54344600, AJUSA 54345300 and AJUSA 54351200, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts are listed for the 2023 Ford Ranger, from AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand.

This table covers the Crankshaft Seal covers. Read more

This group shows a single part: DORMAN 635557.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2023 Ford Ranger come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.

Listed part numbers: AJUSA 81071700, AJUSA 81035200 and AJUSA 81071300, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Cylinder Head Gasket parts for the 2023 Ford Ranger come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2023 Ford Ranger come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.

Listed part numbers: AJUSA 53110800, AJUSA 52672300 and AJUSA 52690500, plus the other parts above.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

2 Cylinder Head Temperature Sensor parts are listed for the 2023 Ford Ranger, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS TX365 and WELLS 5S17577.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2023 Ford Ranger come from AJUSA.

This group includes AJUSA 51116400, AJUSA 50596700 and AJUSA 50610400.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2023 Ford Ranger, from MELLING and SBI.

Part numbers include MELLING V5823 and SBI 13481SN.

This table covers the Harmonic Balancer bolts. Read more

2 Harmonic Balancer Bolt parts are listed for the 2023 Ford Ranger, from DORMAN and SKP.

Listed part numbers: DORMAN 926885 and SKP SK926885.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Intake Manifold Gasket parts for the 2023 Ford Ranger come from 4 brands — AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand.

This group includes AJUSA 13352300, AJUSA 13270500 and AJUSA 77088900 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 2023 Ford Ranger, from FEL-PRO and ULTRA-POWER.

Listed part numbers: FEL-PRO MS97205, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2023 Ford Ranger, from MELLING and SBI.

This group includes MELLING V5824 and SBI 13480.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2023 Ford Ranger, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. ANCHOR 3558 carries the "Popular" badge.

Listed part numbers: ANCHOR 3558, ANCHOR 3559 and DEA / MARMON RIDE CONTROL A20088, plus the other parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2023 Ford Ranger — ANCHOR 300892.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

31 Oil parts are listed for the 2023 Ford Ranger, from VALVOLINE, MOBIL, LIQUI MOLY and 4 other brands. MOBIL 125195 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 19 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts are listed for the 2023 Ford Ranger, from DORMAN, GPD and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 918625, GPD 2611478 and STANDARD MOTOR PRODUCTS OCK27.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 2023 Ford Ranger come from 2 brands — ELRING and MAHLE / CLEVITE.

This group includes ELRING 841050 and MAHLE / CLEVITE B33818.

This table covers the Oil Dipstick tubes. Read more

MOTORCRAFT supplies both parts for the 2023 Ford Ranger.

Listed part numbers: MOTORCRAFT EDPS60 and MOTORCRAFT EDPS73.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2023 Ford Ranger, from DORMAN and ELRING.

Part numbers include DORMAN 090034, DORMAN 090175 and DORMAN 097826, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2023 Ford Ranger come from 2 brands — ELRING and MAHLE / CLEVITE.

Part numbers include ELRING 176090 and MAHLE / CLEVITE B32655.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2023 Ford Ranger, from MOTORAD and MOTORCRAFT.

This group includes MOTORAD MO201 and MOTORCRAFT EC791.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2023 Ford Ranger, from VARIOUS MFR, BOSCH, WIX and 9 other brands. WIX 51348XP carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, BOSCH, FRAM and 2 other brands supply 6 parts: the catalog's value-priced group. A representative part number is BOSCH 72161WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 3 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51348XP.

The Standard Replacement section lists 9 options from VARIOUS MFR, MOTORCRAFT, WIX and 5 other brands — built to original-equipment specification. MOTORCRAFT FL910S is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts for the 2023 Ford Ranger come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE B33849 and VICTOR REINZ 712028400.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: DORMAN 266063.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2023 Ford Ranger.

Part numbers include AJUSA 14124700 and AJUSA 14124900.

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Oil Pump Control Valve / Solenoid parts for the 2023 Ford Ranger come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

Part numbers include DORMAN 926542 and STANDARD MOTOR PRODUCTS OPS407.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE GS34093.

This table covers the pickup tubes and screens that feed the oil pump. Read more

2 Oil Pump Pickup Tube / Screen parts for the 2023 Ford Ranger come from MOTORCRAFT.

This group includes MOTORCRAFT EPT1 and MOTORCRAFT EPT2.

This table covers the rocker arms that transfer cam motion to the valves. Read more

One part is listed for the 2023 Ford Ranger — INA VF02551.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2023 Ford Ranger come from 2 brands — CLOYES and MELLING.

Listed part numbers: CLOYES C567 and MELLING 1078.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

2 Timing Chain & Component Kit parts are listed for the 2023 Ford Ranger, from CLOYES and MELLING.

Listed part numbers: CLOYES 90567S and MELLING 31078S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts for the 2023 Ford Ranger come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BG7040, MELLING BT7040 and PREFERRED COMPONENTS INC R76291 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts are listed for the 2023 Ford Ranger, from INA, MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: INA ZT0692, MELLING BT7051 and PREFERRED COMPONENTS INC T66003A.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts are listed for the 2023 Ford Ranger, from ELRING and MAHLE / CLEVITE.

This group includes ELRING 354790, ELRING 481280 and MAHLE / CLEVITE T33854.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2023 Ford Ranger — MAHLE / CLEVITE 68072.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts are listed for the 2023 Ford Ranger, from CLOYES and MELLING.

Listed part numbers: CLOYES S1205 and MELLING S1315.

This table covers the turbochargers that compress intake air. Read more

2 Turbocharger parts are listed for the 2023 Ford Ranger, from GPD and MOTORCRAFT.

Listed part numbers: GPD 2511865 and MOTORCRAFT TC56.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Turbocharger Boost Sensor parts for the 2023 Ford Ranger come from 2 brands — WELLS and MOTORCRAFT.

The Economy section: 1 option from WELLS. WELLS 5S15716 is listed in this group.

Standard Replacement: 1 part, from MOTORCRAFT. A representative part number is MOTORCRAFT CX2621.

Listed part numbers: WELLS 5S15716 and MOTORCRAFT CX2621.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

DORMAN supplies both parts for the 2023 Ford Ranger.

This group includes DORMAN 667383 and DORMAN 667382.

This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2023 Ford Ranger — DORMAN 667445.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Turbocharger Gasket parts for the 2023 Ford Ranger come from 4 brands — AJUSA, ELRING, GPD and 1 other brand.

Listed part numbers: AJUSA JTC12402, AJUSA JTC12850 and AJUSA JTC12896, plus the other parts above.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: ELRING 807720.

This table covers the Turbocharger Oil filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

One part is listed for the 2023 Ford Ranger — GATES TF1005.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

8 Turbocharger Oil Line parts are listed for the 2023 Ford Ranger, from AJUSA, DORMAN and MOTORCRAFT. DORMAN 667381 carries the "Popular" badge.

Listed part numbers: DORMAN 667381, AJUSA OP11407 and AJUSA OP11434, plus the other parts above.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

MAHLE / CLEVITE supplies both parts for the 2023 Ford Ranger.

This group includes MAHLE / CLEVITE GS33886 and MAHLE / CLEVITE B33892.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2023 Ford Ranger — BOSCH 0280751042.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2023 Ford Ranger, from AJUSA, ELRING and MAHLE / CLEVITE.

This group includes AJUSA 11153200, AJUSA 56099300 and AJUSA 56104900 and the remaining parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

8 Valve Lifter parts are listed for the 2023 Ford Ranger, from MELLING, AJUSA and ENGINETECH. MELLING JB7534 carries the "Popular" badge.

Listed part numbers: MELLING JB7534, AJUSA 85022500 and AJUSA 85023800, plus the other parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2023 Ford Ranger come from MELLING.

Listed part numbers: MELLING VS2496 and MELLING VS2495.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts for the 2023 Ford Ranger come from 3 brands — ENGINETECH, MELLING and SBI.

This group includes ENGINETECH EPF1104, MELLING VL1125 and SBI 1211104.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Valve Stem Seal parts are listed for the 2023 Ford Ranger, from AJUSA, MAHLE / CLEVITE, SBI and 1 other brand. MAHLE / CLEVITE SS45969 carries the "Popular" badge.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2023 Ford Ranger.

Listed part numbers: STANDARD MOTOR PRODUCTS VVT414 and STANDARD MOTOR PRODUCTS VVT346.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts for the 2023 Ford Ranger come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ.

This group includes MAHLE / CLEVITE B33858 and VICTOR REINZ 711337200.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2023 Ford Ranger — STANDARD MOTOR PRODUCTS VVT722.