2019 GMC Canyon Engine Parts

This table covers the camshafts that open the valves. Read more

5 Camshaft parts for the 2019 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 12677826, GM GENUINE 12677832 and GM GENUINE 12677833 and the remaining parts above.

This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes. Read more

One part is listed for the 2019 GMC Canyon — LISLE 37530.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12636316.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: GM GENUINE 12647161.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2019 GMC Canyon come from 2 brands — GM GENUINE and MAHLE / CLEVITE.

Listed part numbers: GM GENUINE 12672032 and MAHLE / CLEVITE CB2033A.

This table covers the Connecting Rod bolts. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 11519680.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54323100.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: GM GENUINE 12699162.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12744917.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

This group shows a single part: GM GENUINE 11589001.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2019 GMC Canyon, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts are listed for the 2019 GMC Canyon, from NATIONAL, WJB / INMOTION PARTS and GM GENUINE. NATIONAL 710674 carries the "Popular" badge.

This group includes NATIONAL 710674, GM GENUINE 12654010 and NATIONAL 710855 and the remaining parts above.

This table covers the Cylinder Head Alignment Dowel pins. Read more

This group shows a single part: GM GENUINE 12570326.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2019 GMC Canyon come from 3 brands — GM GENUINE, AJUSA and FEL-PRO.

This group includes AJUSA 81082800, FEL-PRO ES73486 and GM GENUINE 11547020 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Cylinder Head Gasket parts for the 2019 GMC Canyon come from 5 brands — GM GENUINE, AJUSA, APEX and 2 other brands. The "Popular" part is GM GENUINE 12647574.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2019 GMC Canyon come from 3 brands — AJUSA, GM GENUINE and MAHLE / CLEVITE.

Listed part numbers: AJUSA 52613900, GM GENUINE 12672033 and MAHLE / CLEVITE HS55390A.

This table covers the Engine Block drain plugs. Read more

This group shows a single part: GM GENUINE 11546667.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts are listed for the 2019 GMC Canyon, from KAT'S HEATERS and GM GENUINE.

Part numbers include GM GENUINE 12664613, KAT'S HEATERS 28811 and KAT'S HEATERS 11811.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2019 GMC Canyon come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO GM1228181, among others listed above.

This table covers the Engine Cover retainers and clips. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 10121502.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50552200.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2019 GMC Canyon, from GM GENUINE, MELLING, QUALCAST and 1 other brand.

Listed part numbers: GM GENUINE 12647868, MELLING V3468 and QUALCAST 1013468, plus the other parts above.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2019 GMC Canyon come from 2 brands — GM GENUINE and WELLS.

This group includes GM GENUINE 12718357 and WELLS 5T5013.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2019 GMC Canyon come from 2 brands — SKP and GM GENUINE.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK12697769 is listed in this group.

In the Standard Replacement grade, GM GENUINE supplies 1 part: built to original-equipment specification. A representative part number is GM GENUINE 12697769.

Listed part numbers: SKP SK12697769 and GM GENUINE 12697769.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 11546516.

This table covers the Intake insulators. Read more

This group shows a single part: GM GENUINE 12711487.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12675740.

This table covers the Intake Manifold bolts. Read more

3 Intake Manifold Bolt parts for the 2019 GMC Canyon come from GM GENUINE.

This group includes GM GENUINE 11588352, GM GENUINE 11547321 and GM GENUINE 11547030.

This table covers the Intake Manifold covers. Read more

This group shows a single part: GM GENUINE 12680066.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 2019 GMC Canyon come from 5 brands — AJUSA, FEL-PRO, GM GENUINE and 2 other brands. The "Popular" part is FEL-PRO MS97649.

This group includes FEL-PRO MS97649, GM GENUINE 12648665 and AJUSA 13332900 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12700744.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2019 GMC Canyon, from GM GENUINE, MELLING, QUALCAST and 1 other brand.

This group includes GM GENUINE 12647867, MELLING V3467 and QUALCAST 1013467 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

10 Motor Mount parts are listed for the 2019 GMC Canyon, from GM GENUINE, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. GM GENUINE 23436325 carries the "Popular" badge.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 84060315.

This table covers the Motor Mount Bracket bolts. Read more

2 Motor Mount Bracket Bolt parts for the 2019 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 11588740 and GM GENUINE 11588273.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2019 GMC Canyon.

Part numbers include ANCHOR 300016 and ANCHOR 300017.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

22 Oil parts are listed for the 2019 GMC Canyon, from MOBIL, VALVOLINE, LIQUI MOLY and 3 other brands. ACDELCO 109324 carries the "Popular" badge.

In the Full Synthetic grade, LIQUI MOLY, MOBIL, VALVOLINE and 3 other brands supply 18 parts: full-synthetic oils. A representative part number is ACDELCO 109324.

The High Mileage (>75,000 Miles) section lists 4 options from MOBIL and VALVOLINE — oils grouped for high-mileage engines. MOBIL 123842 is listed in this group.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: DORMAN 66219.

This table covers the Oil Cooler Hose pipes. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 87824093.

This table covers the Oil Cooler lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 87824094.

This table covers the Oil Dipstick tubes. Read more

GM GENUINE supplies both parts for the 2019 GMC Canyon.

Part numbers include GM GENUINE 12679340 and GM GENUINE 12679339.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Dipstick / Tube Seal parts for the 2019 GMC Canyon come from 2 brands — FEL-PRO and GM GENUINE.

This group includes FEL-PRO 73889 and GM GENUINE 24504031.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2019 GMC Canyon, from DORMAN, GM GENUINE and VAICO. DORMAN 090034 carries the "Popular" badge.

Economy: 1 part, from DORMAN. A representative part number is DORMAN 090175.

The Twist Drain section lists 1 option from DORMAN — grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. DORMAN 092018 is listed in this group.

3 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include DORMAN 090034, DORMAN 090175 and DORMAN 092018, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Drain Plug Gasket parts for the 2019 GMC Canyon come from 7 brands — FEL-PRO, DORMAN, GM GENUINE and 4 other brands. The "Popular" part is FEL-PRO 70820.

Part numbers include FEL-PRO 70820, GM GENUINE 12616850 and AJUSA 01288800, among others listed above.

This table covers the Oil Drain Plug inserts. Read more

This group shows a single part: GM GENUINE 11503302.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts are listed for the 2019 GMC Canyon, from ACDELCO, CALORSTAT, DORMAN and 1 other brand.

Listed part numbers: ACDELCO FC279, CALORSTAT OC2314 and DORMAN 90202, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Filler Cap Gasket parts for the 2019 GMC Canyon come from 2 brands — FEL-PRO and GM GENUINE.

This group includes FEL-PRO 73193 and GM GENUINE 24100002.

This table covers the Oil Filler tubes. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12674270.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

20 Oil Filter parts are listed for the 2019 GMC Canyon, from CHAMP / LUBER-FINER, FRAM, VARIOUS MFR and 12 other brands. CHAMP / LUBER-FINER P981 carries the "Popular" badge.

Economy: 7 parts, from CHAMP / LUBER-FINER, FRAM, FVP and 4 other brands. A representative part number is CHAMP / LUBER-FINER P981.

In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57674XP.

The Standard Replacement section: 11 options from MAHLE / CLEVITE, ACDELCO, WIX and 7 other brands. ACDELCO PF2257G is listed in this group.

This table covers the Oil Filter adapters. Read more

This group shows a single part: GM GENUINE 12696080.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO ES73817.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2019 GMC Canyon come from 2 brands — ACDELCO and MOTORAD.

This group includes ACDELCO 12658761 and MOTORAD MO385.

This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 12652358.

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

GM GENUINE supplies the 3 Oil Galley Plug parts for the 2019 GMC Canyon.

Listed part numbers: GM GENUINE 11562126, GM GENUINE 11546667 and GM GENUINE 12691176.

This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12696435.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12638820.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: GM GENUINE 12716566.

This table covers the Oil Pan bolts. Read more

GM GENUINE supplies the 6 Oil Pan Bolt parts for the 2019 GMC Canyon. GM GENUINE 11588713 carries the "Popular" badge.

This group includes GM GENUINE 11588713, GM GENUINE 11588734 and GM GENUINE 12625642 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2019 GMC Canyon — VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12696175.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts for the 2019 GMC Canyon come from 2 brands — CLOYES and S.A. GEAR.

Listed part numbers: CLOYES C952 and S.A. GEAR C1135.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts are listed for the 2019 GMC Canyon, from CLOYES and S.A. GEAR.

Listed part numbers: CLOYES 96040 and S.A. GEAR 91270.

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

2 Oil Pump Control Valve / Solenoid parts for the 2019 GMC Canyon come from 2 brands — GM GENUINE and STANDARD MOTOR PRODUCTS.

Listed part numbers: GM GENUINE 12741262 and STANDARD MOTOR PRODUCTS OPS404.

This table covers the Oil Pump Cover bolts. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 11588716.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 049470.

This table covers the gaskets that seal the Oil Pump Pickup Tube. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pump Pickup Tube Gasket parts for the 2019 GMC Canyon come from 2 brands — FEL-PRO and GM GENUINE.

This group includes FEL-PRO 73744 and GM GENUINE 12637179.

This table covers the Oil Pump sprockets. Read more

4 Oil Pump Sprocket parts for the 2019 GMC Canyon come from 3 brands — CLOYES, GM GENUINE and S.A. GEAR.

Listed part numbers: CLOYES S1122, CLOYES S1121 and GM GENUINE 12669395, plus the other parts above.

This table covers the windage trays that keep crank windage out of the oil sump. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12684793.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2019 GMC Canyon come from GM GENUINE.

Listed part numbers: GM GENUINE 12674055 and GM GENUINE 12674056.

This table covers the Piston Pin retainers. Read more

One part is listed for the 2019 GMC Canyon — GM GENUINE 12647160.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2019 GMC Canyon come from 2 brands — GM GENUINE and HASTINGS MANUFACTURING.

Listed part numbers: GM GENUINE 12705385 and HASTINGS MANUFACTURING 2N5670.

This table covers the rocker arms that transfer cam motion to the valves. Read more

GM GENUINE supplies both parts for the 2019 GMC Canyon.

Listed part numbers: GM GENUINE 12654646 and GM GENUINE 12666601.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2019 GMC Canyon come from 3 brands — GM GENUINE, CLOYES and S.A. GEAR.

Part numbers include CLOYES C951, GM GENUINE 12694716 and GM GENUINE 12647895, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

8 Timing Chain & Component Kit parts are listed for the 2019 GMC Canyon, from S.A. GEAR, CLOYES, ULTRA-POWER and 1 other brand. CLOYES 90951S carries the "Popular" badge.

Economy: 5 parts, from S.A. GEAR and ULTRA-POWER. A representative part number is S.A. GEAR 76369T.

The Standard Replacement section: 3 options from CLOYES and GM GENUINE. CLOYES 90951S is listed in this group.

This group includes CLOYES 90951S, S.A. GEAR 76369T and S.A. GEAR 76369S and the remaining parts above.