2025 GMC Canyon Engine Parts

This table covers the camshafts that open the valves. Read more

GM GENUINE supplies the 3 Camshaft parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

This group includes GM GENUINE 12745084, GM GENUINE 12698637 and GM GENUINE 12739839.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 12693989.

This table covers the Crankshaft Seal covers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12741554.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: GM GENUINE 12733805.

This table covers the Cylinder Head Alignment Dowel pins. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12570326.

This table covers the bolts that clamp the cylinder head to the block. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Listed part numbers: GM GENUINE 11603109 and GM GENUINE 11547740.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12691233.

This table covers the Engine Block drain plugs. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 11602951.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: GM GENUINE 12586687.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2025 GMC Canyon, from TECHPRO and VARIOUS MFR. All of them fit every engine offered in the 2025 Canyon.

Part numbers include TECHPRO GM1228202, among others listed above.

This table covers the Engine Cover grommets. Read more

2 Engine Cover Grommet parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 12594875 and GM GENUINE 12737359.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12718357.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12705813.

This table covers the Intake insulators. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12559120.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: GM GENUINE 12698870.

This table covers the Intake Manifold bolts. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 11548171.

This table covers the Intake Manifold covers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12737532.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12663540.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V5844.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2025 GMC Canyon come from ANCHOR.

Part numbers include ANCHOR 3723 and ANCHOR 3724.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

17 Oil parts for the 2025 GMC Canyon come from 5 brands — MOBIL, LIQUI MOLY, VALVOLINE and 2 other brands. The "Popular" part is ACDELCO 109324.

The Full Synthetic section lists 15 options from LIQUI MOLY, MOBIL, VALVOLINE and 2 other brands — full-synthetic oils. ACDELCO 109324 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL supplies 2 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 123842.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts for the 2025 GMC Canyon come from 3 brands — DORMAN, GM GENUINE and GPD.

Listed part numbers: DORMAN 918499, GM GENUINE 12738946 and GPD 2611474.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts are listed for the 2025 GMC Canyon, from ACDELCO and DORMAN. All of them fit every engine offered in the 2025 Canyon.

This group includes ACDELCO 12670864 and DORMAN 66219.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Cooler Seal parts are listed for the 2025 GMC Canyon, from ACDELCO and GM GENUINE. All of them fit every engine offered in the 2025 Canyon.

This group includes ACDELCO 12670864 and GM GENUINE 12729505.

This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Listed part numbers: GM GENUINE 24504031 and GM GENUINE 12670252.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2025 GMC Canyon come from 2 brands — DORMAN and GM GENUINE. 1 part fits every engine; the other 4 are engine-specific.

This group includes DORMAN 090854CD, DORMAN 090854 and DORMAN 090948CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2025 GMC Canyon come from 2 brands — ACDELCO and MOTORAD. 1 part fits every engine; the other 1 is engine-specific.

This group includes ACDELCO FC268 and MOTORAD MO190.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 24100002.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 2025 GMC Canyon come from 7 brands — ACDELCO, MOBIL, WIX and 4 other brands. The "Popular" part is ACDELCO UPF66R. 1 part fits every engine; the other 10 are engine-specific.

The Economy section lists 3 options from FVP, PRO-TEC and VARIOUS MFR — the catalog's value-priced group. FVP R0351 is listed in this group.

The High Performance / Heavy Duty section lists 4 options from MOBIL, ACDELCO and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. ACDELCO UPF66R is listed in this group.

In the Standard Replacement grade, ACDELCO, HASTINGS / BALDWIN and WIX supply 4 parts: built to original-equipment specification. A representative part number is ACDELCO PF66.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12675796.

This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: GM GENUINE 11570754.

This table covers the Oil nozzles. Read more

This group shows a single part: GM GENUINE 12716498.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2025 GMC Canyon, from DORMAN and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

This group includes DORMAN 266010 and GM GENUINE 12732388.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 12663435.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: GM GENUINE 12740051.

This table covers the Oil Pump Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12740050.

This table covers the seals at the Oil Pump Control Valve / Solenoid. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: GM GENUINE 12626252.

This table covers the Oil Temperature senders. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 55494665.

This table covers the Piston Pin retainers. Read more

This group shows a single part: GM GENUINE 01647383.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12693554.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12671642.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC76291.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: GM GENUINE 12736204.

This table covers the Timing Cover bolts. Read more

2 Timing Cover Bolt parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 11548002 and GM GENUINE 11547061.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: GM GENUINE 12725693.

This table covers the turbochargers that compress intake air. Read more

2 Turbocharger parts for the 2025 GMC Canyon come from 2 brands — GM GENUINE and GPD. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include GM GENUINE 12747531 and GPD 2513012.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Coolant Line parts for the 2025 GMC Canyon come from 2 brands — GM GENUINE and SUNSONG. 2 parts fit every engine; the other 2 are engine-specific.

This group includes GM GENUINE 12729707, GM GENUINE 12735554 and SUNSONG 5804180 and the remaining parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts are listed for the 2025 GMC Canyon, from ELRING and GM GENUINE. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include ELRING B17990 and GM GENUINE 12687166.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2025 GMC Canyon — ELRING 712200.

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

3 Turbocharger Oil Line Gasket / O-Ring parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 12663528, GM GENUINE 12663529 and GM GENUINE 12696999.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

3 Turbocharger Wastegate Solenoid / Actuator parts for the 2025 GMC Canyon come from 3 brands — BOSCH, GM GENUINE and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 2 are engine-specific.

This group includes BOSCH 0280751040, GM GENUINE 12747530 and STANDARD MOTOR PRODUCTS TBA5.

This table covers the Turbocharger Wastegate Solenoid / Actuator retainers. Read more

This group shows a single part: GM GENUINE 12692513.

This table covers the Valve covers. Read more

One part is listed for the 2025 GMC Canyon — GM GENUINE 12700662.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: GM GENUINE 12663348.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: GM GENUINE 12663277.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2025 GMC Canyon — MELLING VSR723.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2025 GMC Canyon — SBI 1211098.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 GMC Canyon come from GM GENUINE. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

Listed part numbers: GM GENUINE 12736876 and GM GENUINE 12731702.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

GM GENUINE supplies both parts for the 2025 GMC Canyon. All of them fit every engine offered in the 2025 Canyon.

Part numbers include GM GENUINE 12663572 and GM GENUINE 12698384.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts for the 2025 GMC Canyon come from 2 brands — GM GENUINE and ACDELCO. The "Popular" part is GM GENUINE 12709014. Every part fits both the 2.7L L4 Turbocharged and the 5.3L V8.

This group includes GM GENUINE 12709014, ACDELCO 12706545 and ACDELCO 12691898 and the remaining parts above.