2006 Honda Fit Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2006 Honda Fit — VICTOR REINZ 815327200.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR4398SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54129500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2006 Honda Fit — KING ENGINE BEARINGS MB5427SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts are listed for the 2006 Honda Fit, from AJUSA and ELRING.

Part numbers include AJUSA 15035700, AJUSA 15063900 and ELRING 290710.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81034300.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts for the 2006 Honda Fit come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Part numbers include AJUSA 10176100, ELRING 091630 and VICTOR REINZ 615408000.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2006 Honda Fit come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 52256600 and ELRING 091610.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50275300.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: SKP SK594383.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13187100.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Motor Mount parts are listed for the 2006 Honda Fit, from DEA / MARMON RIDE CONTROL and ANCHOR.

Part numbers include ANCHOR 9250, DEA / MARMON RIDE CONTROL A4541 and DEA / MARMON RIDE CONTROL AM501.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2006 Honda Fit, from GATES, MOTORAD and SKP.

This group includes GATES 31284, MOTORAD MO136 and SKP SKMO136.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 2006 Honda Fit, from VARIOUS MFR, WIX, FVP and 3 other brands. WIX 51334XP carries the "Popular" badge.

In the Economy grade, FVP, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is FVP R1334A.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51334XP.

The Standard Replacement section lists 4 options from WIX, MAHLE / CLEVITE, MANN and 1 other brand — built to original-equipment specification. WIX 51334 is listed in this group.

Part numbers include WIX 51334XP, FVP R1334A and PRO-TEC PXL51334, among others listed above.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 2006 Honda Fit come from 3 brands — AUTOTECNICA, DORMAN and SKP.

This group includes AUTOTECNICA HA1416253, DORMAN 264415 and SKP SK264415.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2006 Honda Fit.

Part numbers include AJUSA 14090600 and AJUSA 59020300.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

One part is listed for the 2006 Honda Fit — INA ZC90731S.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2006 Honda Fit, from ELRING, AJUSA and VICTOR REINZ.

Part numbers include AJUSA 56040500, ELRING 091640 and ELRING 091650, among others listed above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2006 Honda Fit.

This group includes AJUSA 57030200 and AJUSA 12014300.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2006 Honda Fit — GATES VVS305.

This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

3 Variable Valve Timing (VVT) Solenoid Filter parts are listed for the 2006 Honda Fit, from DORMAN, SKP and WALKER PRODUCTS.

Listed part numbers: DORMAN 917176, SKP SK917176 and WALKER PRODUCTS 5904004.