2007 Honda Fit Engine Parts

This table covers the Camshaft caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

One part is listed for the 2007 Honda Fit — AJUSA 00794900.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2007 Honda Fit come from 4 brands — APEX, FEL-PRO, JAPANESE OE and 1 other brand.

Part numbers include APEX ATC1540, FEL-PRO TCS46212 and JAPANESE OE A6622, among others listed above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 2007 Honda Fit, from ENGINETECH, KING ENGINE BEARINGS, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: ENGINETECH BB1065, KING ENGINE BEARINGS CR4398SM and MAHLE / CLEVITE CB1862A4, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts are listed for the 2007 Honda Fit, from APEX, AJUSA, ENGINETECH and 2 other brands. APEX ACS1054 carries the "Popular" badge.

Listed part numbers: APEX ACS1054, AJUSA 54129500 and ENGINETECH HO15CSB, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2007 Honda Fit come from 4 brands — TOPLINE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. The "Popular" part is TOPLINE TWH16.

Listed part numbers: TOPLINE TWH16, ENGINETECH BC1050 and KING ENGINE BEARINGS MB5427SI, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 2007 Honda Fit come from 6 brands — BCA, NATIONAL, SCHAEFFLER and 3 other brands. The "Popular" part is BCA NS99315.

Part numbers include BCA NS99315, NATIONAL 99315 and SCHAEFFLER SR3549, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts for the 2007 Honda Fit come from 12 brands — APEX, SCHAEFFLER, VICTOR REINZ and 9 other brands. The "Popular" part is APEX ABS128.

This table covers the bolts that clamp the cylinder head to the block. Read more

6 Cylinder Head Bolt parts are listed for the 2007 Honda Fit, from APEX, FEL-PRO, AJUSA and 3 other brands. APEX AHB164 carries the "Popular" badge.

Listed part numbers: APEX AHB164, FEL-PRO ES72449 and AJUSA 81034300, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2007 Honda Fit, from FEL-PRO, ULTRA-POWER, AJUSA and 3 other brands. FEL-PRO 26530PT carries the "Popular" badge.

Part numbers include FEL-PRO 26530PT and AJUSA 10176100, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2007 Honda Fit, from FEL-PRO, ENGINETECH, APEX and 3 other brands. APEX AHS1064 carries the "Popular" badge.

This group includes APEX AHS1064, FEL-PRO HS26530PT and AJUSA 52256600 and the remaining parts above.

This table covers the Cylinder Head plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MAHLE / CLEVITE B32774.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2007 Honda Fit come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2007 Honda Fit, from TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO HO1228108, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2007 Honda Fit, from AJUSA, APEX and ENGINETECH.

Listed part numbers: AJUSA 50275300, APEX AFS1064 and ENGINETECH HO15K3.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: QUALCAST 103063.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2007 Honda Fit, from SKP, ATP, DAYCO and 1 other brand.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SK594383.

The Standard Replacement section lists 3 options from ATP, DAYCO and PIONEER — built to original-equipment specification. ATP 102360 is listed in this group.

This group includes SKP SK594383, ATP 102360 and DAYCO PB1711N and the remaining parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2007 Honda Fit, from FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. FEL-PRO MS97173 carries the "Popular" badge.

Part numbers include FEL-PRO MS97173, APEX AMS1641 and BECK/ARNLEY 0376137, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts for the 2007 Honda Fit come from 4 brands — APEX, FEL-PRO, ULTRA-POWER and 1 other brand.

Listed part numbers: APEX AMS1640 and FEL-PRO MS97182, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2007 Honda Fit come from 2 brands — QUALCAST and TOPLINE.

This group includes QUALCAST 103062 and TOPLINE IVH42.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 2007 Honda Fit come from 7 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 4 other brands. The "Popular" part is SKP SKMA4541.

The Economy section: 3 options from SKP. SKP SKMA4541 is listed in this group.

Standard Replacement: 10 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 3 other brands. A representative part number is ACKOJA A260081.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

34 Oil parts for the 2007 Honda Fit come from 4 brands — VALVOLINE, MOBIL, LIQUI MOLY and 1 other brand. The "Popular" part is LIQUI MOLY 2259. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 18 parts from VALVOLINE, LIQUI MOLY, MOBIL and 1 other brand.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2007 Honda Fit.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2007 Honda Fit come from 5 brands — DORMAN, AGS, ENGINETECH and 2 other brands. The "Popular" part is DORMAN 090033.

This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2007 Honda Fit, from ULTRA-POWER, DORMAN, APEX and 1 other brand. DORMAN 095144 carries the "Popular" badge.

Part numbers include DORMAN 095144, APEX ADP1909 and FEL-PRO 73346, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2007 Honda Fit come from 5 brands — DORMAN, CALORSTAT, GATES and 2 other brands. The "Popular" part is DORMAN 80985.

Listed part numbers: DORMAN 80985, CALORSTAT OC2335 and GATES 31284, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2007 Honda Fit come from 14 brands — BOSCH, VARIOUS MFR, WIX and 11 other brands. The "Popular" part is WIX 57356XP.

The Economy section: 5 options from BOSCH, FVP, PRO-TEC and 2 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57356XP is listed in this group.

Standard Replacement: 10 parts, from BOSCH, DENSO, WIX and 7 other brands. A representative part number is BOSCH 3323.

This table covers the Oil Filter Support tubes. Read more

One part is listed for the 2007 Honda Fit — AUTOTECNICA HA1416938.

This table covers the oil pans that hold the engine's oil sump. Read more

9 Oil Pan parts are listed for the 2007 Honda Fit, from PIONEER, SKP, ACKOJA and 5 other brands. SKP SK264415 carries the "Popular" badge.

Part numbers include SKP SK264415, ACKOJA A260351 and ATP 103296, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts for the 2007 Honda Fit come from 5 brands — VICTOR REINZ, FEL-PRO, AJUSA and 2 other brands. The "Popular" part is FEL-PRO OS30837R.

Part numbers include FEL-PRO OS30837R, VICTOR REINZ 703141410 and AJUSA 14090600, among others listed above.

This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 73196.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2007 Honda Fit come from 3 brands — SKP, MELLING and TOPLINE.

The Economy section: 1 option from SKP. SKP SKM533 is listed in this group.

Standard Replacement: 2 parts, from MELLING and TOPLINE. A representative part number is MELLING M533.

Part numbers include SKP SKM533, MELLING M533 and TOPLINE OPH42.

This table covers the wear sleeves used to restore a Oil Pump seal surface. Read more

3 Oil Pump Repair Sleeve parts are listed for the 2007 Honda Fit, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2007 Honda Fit, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 473677 and WJB / INMOTION PARTS WS473677.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 2007 Honda Fit, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH P4890, ENGINETECH K48904P and TOPLINE PAH42.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts are listed for the 2007 Honda Fit, from HASTINGS MANUFACTURING, ENGINETECH and TOPLINE.

The Premium section lists 1 option from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH S73114 is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C5253S is listed in this group.

This group includes ENGINETECH S73114, HASTINGS MANUFACTURING 2C5253S and HASTINGS MANUFACTURING 2C5253 and the remaining parts above.

This table covers the Thrust washers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 1T1001.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts for the 2007 Honda Fit come from 5 brands — CLOYES, FVP, INA and 2 other brands. The "Popular" part is CLOYES S1030.

This group includes CLOYES S1030 and INA ZSS1030 and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2007 Honda Fit, from S.A. GEAR, CLOYES, FVP and 2 other brands. S.A. GEAR C1061 carries the "Popular" badge.

Part numbers include S.A. GEAR C1061 and CLOYES C519, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts for the 2007 Honda Fit come from 5 brands — PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is CLOYES 90519SX.

The Economy section: 4 options from PREFERRED COMPONENTS INC and S.A. GEAR. PREFERRED COMPONENTS INC TS22132 is listed in this group.

Standard Replacement: 5 parts, from CLOYES, INA and ENGINETECH. A representative part number is CLOYES 90519SX.

This group includes CLOYES 90519SX, PREFERRED COMPONENTS INC TS22132 and PREFERRED COMPONENTS INC TS17132 and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2007 Honda Fit, from CLOYES, S.A. GEAR and PREFERRED COMPONENTS INC. CLOYES 95642 carries the "Popular" badge.

This group includes CLOYES 95642, S.A. GEAR 91163 and CLOYES 95781 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts for the 2007 Honda Fit come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Listed part numbers: CLOYES 95641 and INA ZT95641, plus the other parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5159.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

2 Timing Cover Repair Sleeve parts for the 2007 Honda Fit come from 2 brands — SCHAEFFLER and SKF.

This group includes SCHAEFFLER SR3487 and SKF 99163.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Timing Cover Seal parts for the 2007 Honda Fit come from 4 brands — ITM ENGINE COMPONENTS, MAHLE / CLEVITE, SCHAEFFLER and 1 other brand.

This group includes ITM ENGINE COMPONENTS 1501528, MAHLE / CLEVITE 67932 and SCHAEFFLER SS5126 and the remaining parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts for the 2007 Honda Fit come from 5 brands — S.A. GEAR, CLOYES, FVP and 2 other brands. The "Popular" part is S.A. GEAR S1339.

Part numbers include S.A. GEAR S1339 and CLOYES S1031, among others listed above.

This table covers the Torque dampers. Read more

One part is listed for the 2007 Honda Fit — FVP ETD590179.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts for the 2007 Honda Fit come from 7 brands — FEL-PRO, ULTRA-POWER, AJUSA and 4 other brands. The "Popular" part is FEL-PRO VS50782R.

Part numbers include FEL-PRO VS50782R and AJUSA 56040500, among others listed above.

This table covers the Valve Cover grommets. Read more

2 Valve Cover Grommet parts for the 2007 Honda Fit come from 2 brands — BECK/ARNLEY and ELRING.

Listed part numbers: BECK/ARNLEY 0396602 and ELRING 428570.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts for the 2007 Honda Fit come from 3 brands — SBI, QUALCAST and TOPLINE. The "Popular" part is SBI 1408157.

Listed part numbers: SBI 1408157, QUALCAST 308157 and QUALCAST 308158, plus the other parts above.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2007 Honda Fit — MELLING VSR729.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2007 Honda Fit, from MELLING, QUALCAST and SBI.

This group includes MELLING VL1060, QUALCAST 345008 and SBI 1211060.