The 1983 Hyundai Pony has 36 engine parts with verified fitment on this page — 14 part types and 16 brands, covering the 1.4L L4 engine. Each part includes a manufacturer part number and application notes.
On the 1983 Hyundai Pony, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 16 parts of the 36 listed are Crankshaft Seal (6 parts), Oil Filter (6 parts) and Camshaft Seal (4 parts). The other 11 part types cover the remaining 20 parts.
Every part on this page is matched to the 1.4L L4 — the only engine offered in the 1983 Hyundai Pony.
The most listed brands for 1983 Hyundai Pony engine parts are ELRING (5 parts), FEL-PRO (5 parts) and NATIONAL (4 parts), plus 13 more brands. Quality grades include Economy and Standard Replacement.
4 parts on this 1983 Hyundai Pony page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including NATIONAL 224460 (Crankshaft Seal) and FRAM PH3950 (Oil Filter). Click any part number to see every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL | 99139 | 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS | WS99139 | 🇨🇦 CA | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
2 Camshaft Repair Sleeve parts are listed for the 1983 Hyundai Pony, from NATIONAL and WJB / INMOTION PARTS.
Part numbers include NATIONAL 99139 and WJB / INMOTION PARTS WS99139.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 293946 | 🇨🇦 CA | Material: ACM (Polyacrylate)Radial Shaft Seal Design: A | View on Amazon |
| NATIONAL | 3771 | 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER | SS2449 | 🇨🇦 CA | with 1.378 In Shaft6.985 mm Width | View on Amazon |
| WJB / INMOTION PARTS | WS3771 | 🇨🇦 CA | Unknown Cylinder Head Type | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Camshaft Seal parts are listed for the 1983 Hyundai Pony, from ELRING, NATIONAL, SCHAEFFLER and 1 other brand.
This group includes ELRING 293946, NATIONAL 3771 and SCHAEFFLER SS2449 and the remaining parts above.
Circular / Semi-Circular Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | CP75001 | 🇨🇦 CA | RearValve Cover Camshaft Bore Plug | View on Amazon |
| VICTOR REINZ | 711616600 | 🇨🇦 CA | Valve Cover | View on Amazon |
This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
2 Circular / Semi-Circular Plug parts are listed for the 1983 Hyundai Pony, from FEL-PRO and VICTOR REINZ.
Listed part numbers: FEL-PRO CP75001 and VICTOR REINZ 711616600.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO | 16275 | 🇨🇦 CA | RearUse with Installation tool | View on Amazon |
| MAHLE / CLEVITE | A354 | 🇨🇦 CA | Steel | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
2 Crankshaft Repair Sleeve parts are listed for the 1983 Hyundai Pony, from FEL-PRO and MAHLE / CLEVITE.
This group includes FEL-PRO 16275 and MAHLE / CLEVITE A354.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular | 224460 | 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Popular | WS224460 | 🇨🇦 CA | Front | View on Amazon |
| BCA | NS224460 | 🇨🇦 CA | Front | View on Amazon |
| ELRING | 247280 | 🇨🇦 CA | Height [MM]: 7Inner Diameter [mm]: 44 | View on Amazon |
| FEL-PRO | BS400971 | 🇨🇦 CA | Rubber | View on Amazon |
| FEL-PRO | TCS45095 | 🇺🇸 US 🇨🇦 CA | Crankshaft Front Seal SetFront | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts are listed for the 1983 Hyundai Pony, from FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 2 other brands. NATIONAL 224460 carries the "Popular" badge.
Listed part numbers: NATIONAL 224460, WJB / INMOTION PARTS WS224460 and BCA NS224460, plus the other parts above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS | 11402 | 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
One part is listed for the 1983 Hyundai Pony — KAT'S HEATERS 11402.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL | A6100 | 🇨🇦 CA | Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
One part is listed for the 1983 Hyundai Pony — DEA / MARMON RIDE CONTROL A6100.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER | PH2856A | 🇨🇦 CA | Inside Diameter: M20 X 1.5 Thread. | View on Amazon |
| PRO-TEC | PXL51381 | 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR | PG193 | 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Popular | PH3950 | 🇨🇦 CA | Extra GuardSpin-On | View on Amazon |
| WIX Popular | 51381 | 🇨🇦 CA | View on Amazon | |
| HASTINGS / BALDWIN | LF144 | 🇨🇦 CA | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
6 Oil Filter parts are listed for the 1983 Hyundai Pony, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 3 other brands. FRAM PH3950 carries the "Popular" badge.
In the Economy grade, CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2856A.
The Standard Replacement section lists 3 options from FRAM, WIX and HASTINGS / BALDWIN — built to original-equipment specification. FRAM PH3950 is listed in this group.
Listed part numbers: FRAM PH3950, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381, plus the other parts above.
Oil Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS221710 | 🇨🇦 CA | View on Amazon | |
| NATIONAL | 221710 | 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS | WS221710 | 🇨🇦 CA | View on Amazon |
This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Pump Seal parts for the 1983 Hyundai Pony come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
This group includes BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.
Torque Strut Bushing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL | A6640 | 🇨🇦 CA | FrontManual trans. | View on Amazon |
This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
One part is listed for the 1983 Hyundai Pony — DEA / MARMON RIDE CONTROL A6640.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL | A6122 | 🇨🇦 CA | FrontManual trans. | View on Amazon |
| DEA / MARMON RIDE CONTROL | A6150 | 🇨🇦 CA | FrontAutomatic trans. | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Torque Strut Mount parts for the 1983 Hyundai Pony come from DEA / MARMON RIDE CONTROL.
Part numbers include DEA / MARMON RIDE CONTROL A6122 and DEA / MARMON RIDE CONTROL A6150.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 287059 | 🇨🇦 CA | GL Deluxe | View on Amazon |
| FEL-PRO | VS50106R | 🇺🇸 US 🇨🇦 CA | Permadry® molded rubber gskt. incl. | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts are listed for the 1983 Hyundai Pony, from ELRING and FEL-PRO.
Listed part numbers: ELRING 287059 and FEL-PRO VS50106R.
Valve Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ | 151012801 | 🇨🇦 CA | Set | View on Amazon |
This table covers the Valve Cover grommets.
One part is listed for the 1983 Hyundai Pony — VICTOR REINZ 151012801.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 125940 | 🇨🇦 CA | Set | View on Amazon |
| ELRING | 010270 | 🇨🇦 CA | Material: ACM (Polyacrylate) | View on Amazon |
| VICTOR REINZ | 121709301 | 🇨🇦 CA | Set | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts are listed for the 1983 Hyundai Pony, from ELRING and VICTOR REINZ.
Listed part numbers: ELRING 125940, ELRING 010270 and VICTOR REINZ 121709301.
Buying Engine Parts for a 1983 Hyundai Pony
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 1.4L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 1983 Hyundai Pony?
Our catalog currently lists 36 engine parts for the 1983 Hyundai Pony across 14 subcategories and 16 brands, covering the 1.4L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1983 Hyundai Pony?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1983 Hyundai Pony was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1983 Hyundai Pony?
Every part on this page is matched to the 1.4L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1983 Hyundai Pony
Engine Parts for Other Hyundai Pony Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.