1986 Hyundai Pony Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts for the 1986 Hyundai Pony come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 1986 Hyundai Pony come from 4 brands — ELRING, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: ELRING 293946, NATIONAL 3771 and SCHAEFFLER SS2449, plus the other parts above.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts for the 1986 Hyundai Pony come from 2 brands — FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO CP75001 and VICTOR REINZ 711616600.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts are listed for the 1986 Hyundai Pony, from MAHLE / CLEVITE and SEALED POWER.

In the High Performance grade, MAHLE / CLEVITE supplies 1 part: engineered beyond original-equipment specification. A representative part number is MAHLE / CLEVITE CB1120HN.

The Standard Replacement section lists 3 options from MAHLE / CLEVITE and SEALED POWER — built to original-equipment specification. MAHLE / CLEVITE CB1120A is listed in this group.

Part numbers include MAHLE / CLEVITE CB1120HN, MAHLE / CLEVITE CB1120A and MAHLE / CLEVITE CB1120A4, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 1986 Hyundai Pony come from 2 brands — BECK/ARNLEY and SEALED POWER.

Part numbers include BECK/ARNLEY 0140541 and SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

5 Crankshaft Repair Sleeve parts for the 1986 Hyundai Pony come from 4 brands — SCHAEFFLER, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO 16275.

Part numbers include FEL-PRO 16275, MAHLE / CLEVITE A354 and SCHAEFFLER SR3463, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 1986 Hyundai Pony come from 8 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 5 other brands. The "Popular" part is NATIONAL 224460.

Part numbers include NATIONAL 224460, WJB / INMOTION PARTS WS224460 and BCA NS224460, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

This group shows a single part: KAT'S HEATERS 11402.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A6100.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO90.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 1986 Hyundai Pony come from 8 brands — CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 5 other brands. The "Popular" part is BOSCH 3421.

The Economy section lists 3 options from CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR — the catalog's value-priced group. CHAMP / LUBER-FINER PH2856A is listed in this group.

Standard Replacement: 5 parts, from BOSCH, WIX, BECK/ARNLEY and 2 other brands. A representative part number is BOSCH 3421.

This group includes BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381 and the remaining parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Pump Seal parts are listed for the 1986 Hyundai Pony, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

One part is listed for the 1986 Hyundai Pony — SEALED POWER 22273.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 17168.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: SEALED POWER 2232026.

This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A6640.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

DEA / MARMON RIDE CONTROL supplies both parts for the 1986 Hyundai Pony.

Part numbers include DEA / MARMON RIDE CONTROL A6122 and DEA / MARMON RIDE CONTROL A6150.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 1986 Hyundai Pony come from 2 brands — ELRING and FEL-PRO.

Part numbers include ELRING 287059 and FEL-PRO VS50106R.

This table covers the Valve Cover grommets. Read more

This group shows a single part: VICTOR REINZ 151012801.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 1986 Hyundai Pony come from 3 brands — ELRING, MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: ELRING 125940, ELRING 010270 and MAHLE / CLEVITE SS45441, plus the other parts above.