1987 Hyundai Pony Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

2 Camshaft Repair Sleeve parts are listed for the 1987 Hyundai Pony, from NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99139 and WJB / INMOTION PARTS WS99139.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Camshaft Seal parts are listed for the 1987 Hyundai Pony, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 3771, SCHAEFFLER SS2449 and WJB / INMOTION PARTS WS3771.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Circular / Semi-Circular Plug parts are listed for the 1987 Hyundai Pony, from FEL-PRO and VICTOR REINZ.

This group includes FEL-PRO CP75001 and VICTOR REINZ 711616600.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 1987 Hyundai Pony come from 2 brands — MAHLE / CLEVITE and SEALED POWER.

The High Performance section lists 1 option from MAHLE / CLEVITE — engineered beyond original-equipment specification. MAHLE / CLEVITE CB1120HN is listed in this group.

In the Standard Replacement grade, MAHLE / CLEVITE and SEALED POWER supply 3 parts: built to original-equipment specification. A representative part number is MAHLE / CLEVITE CB1120A.

Part numbers include MAHLE / CLEVITE CB1120HN, MAHLE / CLEVITE CB1120A and MAHLE / CLEVITE CB1120A4, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts are listed for the 1987 Hyundai Pony, from BECK/ARNLEY and SEALED POWER.

Part numbers include BECK/ARNLEY 0140541 and SEALED POWER 5103M.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts are listed for the 1987 Hyundai Pony, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 16275 and MAHLE / CLEVITE A354.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts are listed for the 1987 Hyundai Pony, from FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 3 other brands. NATIONAL 224460 carries the "Popular" badge.

Part numbers include NATIONAL 224460, WJB / INMOTION PARTS WS224460 and BCA NS224460, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1987 Hyundai Pony — KAT'S HEATERS 11402.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 1987 Hyundai Pony — DEA / MARMON RIDE CONTROL A6100.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

MOBIL supplies the 19 Oil parts for the 1987 Hyundai Pony. MOBIL 125195 carries the "Popular" badge.

In the Full Synthetic grade, MOBIL supplies 9 parts: full-synthetic oils. A representative part number is MOBIL 125195.

In the Heavy Duty / Diesel grade, MOBIL supplies 1 part: grouped under the catalog's "Heavy Duty / Diesel" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 122253.

The High Mileage (>75,000 Miles) section lists 6 options from MOBIL — oils grouped for high-mileage engines. MOBIL 125202 is listed in this group.

In the Synthetic Blend grade, MOBIL supplies 3 parts: synthetic-blend oils. A representative part number is MOBIL 124406.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 1987 Hyundai Pony, from DORMAN and SKP.

Part numbers include DORMAN 090033, DORMAN 090053 and DORMAN 092020, among others listed above.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 1987 Hyundai Pony — MOTORAD MO90.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 1987 Hyundai Pony, from CHAMP / LUBER-FINER, PRO-TEC, VARIOUS MFR and 5 other brands. BOSCH 3421 carries the "Popular" badge.

In the Economy grade, CHAMP / LUBER-FINER, PRO-TEC and VARIOUS MFR supply 3 parts: the catalog's value-priced group. A representative part number is CHAMP / LUBER-FINER PH2856A.

The Standard Replacement section: 5 options from BOSCH, WIX, BECK/ARNLEY and 2 other brands. BOSCH 3421 is listed in this group.

This group includes BOSCH 3421, CHAMP / LUBER-FINER PH2856A and PRO-TEC PXL51381 and the remaining parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Pump Seal parts for the 1987 Hyundai Pony come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS221710, NATIONAL 221710 and WJB / INMOTION PARTS WS221710.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: MAHLE / CLEVITE 51233.

This table covers the Torque Strut bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1987 Hyundai Pony — DEA / MARMON RIDE CONTROL A6640.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 1987 Hyundai Pony come from DEA / MARMON RIDE CONTROL.

Listed part numbers: DEA / MARMON RIDE CONTROL A6122 and DEA / MARMON RIDE CONTROL A6150.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1987 Hyundai Pony — FEL-PRO VS50106R.

This table covers the Valve Cover grommets. Read more

One part is listed for the 1987 Hyundai Pony — VICTOR REINZ 151012801.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts are listed for the 1987 Hyundai Pony, from MAHLE / CLEVITE and VICTOR REINZ.

Listed part numbers: MAHLE / CLEVITE SS45441 and VICTOR REINZ 121709301.