2005 International 3200 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2005 International 3200 has 22 engine parts with verified fitment on this page — 12 part types and 12 brands, covering both the 6.0L V8 DIESEL Turbocharged and the 7.6L L6 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.

The engine on the 2005 International 3200 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Turbocharger (5 parts), Oil Filter (3 parts) and Valve Cover Gasket (3 parts). The other 9 part types cover the remaining 11 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
DURA-BOND Fits: 7.6L L6 DIESEL Turbocharged IN22
🇺🇸 US
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

High Pressure Diesel Injection Oil Pump (HPOP)

Brand Part Number Markets Notes Buy
DELPHI Fits: 7.6L L6 DIESEL Turbocharged EXHTP129
🇺🇸 US
Replaces OE Part Number(s) 1883888C93, 1842424C2, 1871291C4, 1842423C97,1871292C96, 1842614C91From Engine Serial # 2,000,001 To 2,999
View on
Amazon

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

High Pressure Oil Rail Seal

Brand Part Number Markets Notes Buy
DORMAN Fits: 7.6L L6 DIESEL Turbocharged 2855102
🇺🇸 US
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 7.6L L6 DIESEL Turbocharged SK168
🇺🇸 US
View on
Amazon

This table covers the seals at the High Pressure Oil Rail. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Cooler

Brand Part Number Markets Notes Buy
ULTRA-POWER Fits: 7.6L L6 DIESEL Turbocharged 2P303
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.

Oil Filter

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
WIX Fits: 7.6L L6 DIESEL Turbocharged 51799XD
🇺🇸 US
Extended DrainSpin-On Lube Filter
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN Fits: 7.6L L6 DIESEL Turbocharged LF284
🇺🇸 US
View on
Amazon
WIX Fits: 7.6L L6 DIESEL Turbocharged 51799
🇺🇸 US
Spin-On Lube Filter
Fitment notes — WIX 51799
Spin-On Lube Filter
Full-Flow Filter
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan

Brand Part Number Markets Notes Buy
DORMAN Fits: 7.6L L6 DIESEL Turbocharged 2645104
🇺🇸 US
Front Sump
View on
Amazon
SPECTRA PREMIUM Fits: 7.6L L6 DIESEL Turbocharged DTP07A
🇺🇸 US
Front
Fitment notes — SPECTRA PREMIUM DTP07A
Front
or:
Rear SumpGasket and/or Sealant Not Included
View on
Amazon

This table covers the oil pans that hold the engine's oil sump.

Oil Temperature Sender

Brand Part Number Markets Notes Buy
DORMAN Fits: 7.6L L6 DIESEL Turbocharged 9047549
🇺🇸 US
Sensor Only
View on
Amazon

This table covers the Oil Temperature senders.

Turbocharger

Brand Part Number Markets Notes Buy
GPD Popular Fits: 7.6L L6 DIESEL Turbocharged 2511558
🇺🇸 US
with OEM Numbers, 179035, 175243, 175733with S300V129 Turbo
View on
Amazon
GPD Fits: 7.6L L6 DIESEL Turbocharged 2511398
🇺🇸 US
with s300 Turbowithout Wastegate
View on
Amazon
GPD Fits: 7.6L L6 DIESEL Turbocharged 2511393
🇺🇸 US
with 3LM-466 Turbo
View on
Amazon
GPD Fits: 7.6L L6 DIESEL Turbocharged 2511348
🇺🇸 US
with T04B18 Turbo
View on
Amazon
GPD Fits: 7.6L L6 DIESEL Turbocharged 2511897
🇺🇸 US
Original Equipment (OE) Specificationswith Original Equipment (OE) # 1842216C91, 1842216C92, 1842216C93, 1842216C94, 1842216C95, 1842580C93, 1870931C91, 1870931C92, 1870931C93, 1870931C94, 5010313R94
View on
Amazon

This table covers the turbochargers that compress intake air.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
GPD Fits: 7.6L L6 DIESEL Turbocharged 2535129
🇺🇸 US
Only Fits Compatible Aftermarket Turbochargers
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
DAYTON Fits: 7.6L L6 DIESEL Turbocharged 2645122
🇺🇸 US
with Engine Brake
View on
Amazon
DORMAN Fits: 7.6L L6 DIESEL Turbocharged 2645114
🇺🇸 US
without Engine Brake
View on
Amazon
SKP Fits: 7.6L L6 DIESEL Turbocharged SK2645114
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Spring

Brand Part Number Markets Notes Buy
MELLING Fits: 7.6L L6 DIESEL Turbocharged VS1190
🇺🇸 US
OE 682064C1
View on
Amazon

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.

Valve Spring Retainer Keeper

Brand Part Number Markets Notes Buy
MELLING Fits: 7.6L L6 DIESEL Turbocharged VL300
🇺🇸 US
with Single Groove
View on
Amazon

This table covers the keepers that lock each valve-spring retainer to the stem.

Buying Engine Parts for a 2005 International 3200

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Turbocharger and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 2005 International 3200?

Our catalog currently lists 22 engine parts for the 2005 International 3200 across 12 subcategories and 12 brands, covering both the 6.0L V8 DIESEL Turbocharged and the 7.6L L6 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2005 International 3200 engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2005 International 3200?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2005 International 3200 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2005 International 3200?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2005 International 3200

Engine Parts for Other International 3200 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.