2007 International 3200 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2007 International 3200 — KING ENGINE BEARINGS CR8038CP.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

ELRING supplies both parts for the 2007 International 3200.

Listed part numbers: ELRING 832600 and ELRING 832570.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V2180.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 High Pressure Diesel Injection Oil Pump (HPOP) parts for the 2007 International 3200 come from 2 brands — GB REMANUFACTURING and STANDARD MOTOR PRODUCTS.

Part numbers include GB REMANUFACTURING 739206 and STANDARD MOTOR PRODUCTS HPI7.

This table covers the High Pressure Oil Rail repair kits. Read more

This group shows a single part: GB REMANUFACTURING 522037.

This table covers the seals at the High Pressure Oil Rail. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS SK145.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V2179.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCK1.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2007 International 3200 — STANDARD MOTOR PRODUCTS OCG1.

This table covers the drain plugs in the oil pan. Read more

This group shows a single part: DORMAN 090177.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 2007 International 3200 come from 7 brands — ULTRA-POWER, VARIOUS MFR, HASTINGS / BALDWIN and 4 other brands. The "Popular" part is HASTINGS / BALDWIN LF632.

The Economy section lists 5 options from ULTRA-POWER, VARIOUS MFR and FAMOUS BRAND — the catalog's value-priced group. FAMOUS BRAND 84311 is listed in this group.

In the Standard Replacement grade, HASTINGS / BALDWIN, WIX, MAHLE / CLEVITE and 1 other brand supply 6 parts: built to original-equipment specification. A representative part number is HASTINGS / BALDWIN LF632.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts are listed for the 2007 International 3200, from DORMAN and ULTRA-POWER.

Listed part numbers: DORMAN 904204, plus the other parts above.

This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Pump Seal parts are listed for the 2007 International 3200, from STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Part numbers include STANDARD MOTOR PRODUCTS SK142, among others listed above.

This table covers the Oil Stand pipes. Read more

This group shows a single part: GB REMANUFACTURING 522073.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

One part is listed for the 2007 International 3200 — MELLING MPR662.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts for the 2007 International 3200 come from 3 brands — GPD, ROTOMASTER and STANDARD MOTOR PRODUCTS.

Listed part numbers: GPD 2511850, ROTOMASTER A1360100N and STANDARD MOTOR PRODUCTS TBC593.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts are listed for the 2007 International 3200, from DORMAN and SKP.

Listed part numbers: DORMAN 904234 and SKP SK904234.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

5 Turbocharger Oil Line parts for the 2007 International 3200 come from 4 brands — GATES, DORMAN, SUNSONG and 1 other brand.

This group includes DORMAN 625210, GATES TL102 and GATES TL100 and the remaining parts above.

This table covers the Turbocharger Up pipes. Read more

4 Turbocharger Up Pipe parts are listed for the 2007 International 3200, from DORMAN and ULTRA-POWER.

This group includes DORMAN 679023 and DORMAN 679024 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2007 International 3200 come from 2 brands — DORMAN and GB REMANUFACTURING.

This group includes DORMAN 904401 and GB REMANUFACTURING 522031.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

MELLING supplies both parts for the 2007 International 3200.

In the High Performance grade, MELLING supplies 1 part: engineered beyond original-equipment specification. A representative part number is MELLING 466704.

The Standard Replacement section: 1 option from MELLING. MELLING VS1458 is listed in this group.

Listed part numbers: MELLING 466704 and MELLING VS1458.