2008 International 3200 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR8038CP.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2008 International 3200 come from ELRING.

This group includes ELRING 832600 and ELRING 832570.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2008 International 3200 — MELLING V2180.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2008 International 3200 — MELLING V2179.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2008 International 3200 — STANDARD MOTOR PRODUCTS OCK1.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCG1.

This table covers the drain plugs in the oil pan. Read more

One part is listed for the 2008 International 3200 — DORMAN 090177.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts are listed for the 2008 International 3200, from VARIOUS MFR, HASTINGS / BALDWIN, WIX and 2 other brands. HASTINGS / BALDWIN LF632 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR supplies 2 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG5526.

The Standard Replacement section lists 6 options from HASTINGS / BALDWIN, WIX, FEL-PRO and 1 other brand — built to original-equipment specification. HASTINGS / BALDWIN LF632 is listed in this group.

Part numbers include HASTINGS / BALDWIN LF632, VARIOUS MFR PG5526 and VARIOUS MFR PG5526FC, among others listed above.

This table covers the Oil Filter covers. Read more

This group shows a single part: DORMAN 904204.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: MELLING MPR662.

This table covers the turbochargers that compress intake air. Read more

One part is listed for the 2008 International 3200 — GPD 2511850.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts for the 2008 International 3200 come from 2 brands — DORMAN and SKP.

This group includes DORMAN 904234 and SKP SK904234.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Oil Line parts are listed for the 2008 International 3200, from GATES, DORMAN and SUNSONG.

Listed part numbers: DORMAN 625210, GATES TL102 and GATES TL100, plus the other parts above.

This table covers the Turbocharger Up pipes. Read more

2 Turbocharger Up Pipe parts for the 2008 International 3200 come from DORMAN.

Part numbers include DORMAN 679023 and DORMAN 679024.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2008 International 3200 — DORMAN 904401.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2008 International 3200 come from MELLING.

The High Performance section lists 1 option from MELLING — engineered beyond original-equipment specification. MELLING 466704 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING VS1458.

Part numbers include MELLING 466704 and MELLING VS1458.