2006 International 3200 Engine Parts

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Camshaft Bearing parts for the 2006 International 3200 come from 2 brands — DURA-BOND and ENGINE PRO.

This group includes DURA-BOND IN22 and ENGINE PRO 151996.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR8038CP.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2006 International 3200 come from ELRING.

Part numbers include ELRING 832600 and ELRING 832570.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2006 International 3200 — MELLING V2180.

This table covers the high-pressure oil pumps that fire HEUI diesel injectors. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 High Pressure Diesel Injection Oil Pump (HPOP) parts are listed for the 2006 International 3200, from GB REMANUFACTURING and STANDARD MOTOR PRODUCTS.

This group includes GB REMANUFACTURING 739206 and STANDARD MOTOR PRODUCTS HPI7.

This table covers the High Pressure Oil Rail repair kits. Read more

One part is listed for the 2006 International 3200 — GB REMANUFACTURING 522037.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2006 International 3200 — MELLING V2179.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2006 International 3200 — STANDARD MOTOR PRODUCTS OCK1.

This table covers the drain plugs in the oil pan. Read more

One part is listed for the 2006 International 3200 — DORMAN 090177.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts are listed for the 2006 International 3200, from ULTRA-POWER, VARIOUS MFR, HASTINGS / BALDWIN and 4 other brands. HASTINGS / BALDWIN LF632 carries the "Popular" badge.

In the Economy grade, ULTRA-POWER, VARIOUS MFR and FAMOUS BRAND supply 5 parts: the catalog's value-priced group. A representative part number is FAMOUS BRAND 84311.

The Standard Replacement section lists 6 options from HASTINGS / BALDWIN, WIX, MAHLE / CLEVITE and 1 other brand — built to original-equipment specification. HASTINGS / BALDWIN LF632 is listed in this group.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2006 International 3200 come from 2 brands — DORMAN and ULTRA-POWER.

Part numbers include DORMAN 904204, among others listed above.

This table covers the Oil Stand pipes. Read more

One part is listed for the 2006 International 3200 — GB REMANUFACTURING 522073.

This table covers the pushrods that transfer lifter motion to the rocker arms. Read more

This group shows a single part: MELLING MPR662.

This table covers the turbochargers that compress intake air. Read more

3 Turbocharger parts are listed for the 2006 International 3200, from GPD, ROTOMASTER and STANDARD MOTOR PRODUCTS.

Part numbers include GPD 2511850, ROTOMASTER A1360100N and STANDARD MOTOR PRODUCTS TBC593.

This table covers the fasteners that mount the turbocharger. Read more

2 Turbocharger Mounting Hardware parts for the 2006 International 3200 come from 2 brands — DORMAN and SKP.

Part numbers include DORMAN 904234 and SKP SK904234.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

4 Turbocharger Oil Line parts are listed for the 2006 International 3200, from GATES, SUNSONG and ULTRA-POWER.

Part numbers include GATES TL102, GATES TL100 and SUNSONG 5801033, among others listed above.

This table covers the Turbocharger Up pipes. Read more

4 Turbocharger Up Pipe parts for the 2006 International 3200 come from 2 brands — DORMAN and ULTRA-POWER.

Listed part numbers: DORMAN 679023 and DORMAN 679024, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2006 International 3200, from DORMAN and GB REMANUFACTURING.

Part numbers include DORMAN 904401 and GB REMANUFACTURING 522031.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

2 Valve Spring parts for the 2006 International 3200 come from MELLING.

The High Performance section lists 1 option from MELLING — engineered beyond original-equipment specification. MELLING 466704 is listed in this group.

Standard Replacement: 1 part, from MELLING. A representative part number is MELLING VS1458.

Listed part numbers: MELLING 466704 and MELLING VS1458.