The 2020 International Durastar has 8 engine parts with verified fitment on this page — 6 part types and 5 brands, covering both the 6.7L L6 DIESEL Turbocharged and the 8.9L L6 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.
On the 2020 International Durastar, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil Filter (2 parts), Oil Pan (2 parts) and Crankcase Pressure Sensor (1 part). The other 3 part types cover the remaining 3 parts.
The 2020 International Durastar was sold with both the 6.7L L6 DIESEL Turbocharged and the 8.9L L6 DIESEL Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
5 brands supply engine parts for the 2020 International Durastar, led by DORMAN (3 parts), SPECTRA PREMIUM (2 parts) and HASTINGS / BALDWIN (1 part), plus 2 more brands.
Each part number listed for the 2020 International Durastar opens a page with every vehicle that part fits.
Crankcase Pressure Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.7L L6 DIESEL Turbocharged | 9047119 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Crankcase pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor.
This group shows a single part: DORMAN 9047119.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS / BALDWIN Fits: 6.7L L6 DIESEL Turbocharged | LF551 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WIX Fits: 6.7L L6 DIESEL Turbocharged | 57182 | 🇺🇸 US | Spin-On FilterSpin-On Lube Filter | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
2 Oil Filter parts for the 2020 International Durastar come from 2 brands — HASTINGS / BALDWIN and WIX.
This group includes HASTINGS / BALDWIN LF551 and WIX 57182.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SPECTRA PREMIUM Fits: 6.7L L6 DIESEL Turbocharged | CMP06A | 🇺🇸 US 🇨🇦 CA | Front SumpEPA 17 | View on Amazon |
| SPECTRA PREMIUM Fits: 6.7L L6 DIESEL Turbocharged | CMP10A | 🇺🇸 US 🇨🇦 CA | Fits Front SumpGasket and/or Sealant Not Included | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
SPECTRA PREMIUM supplies both parts for the 2020 International Durastar.
This group includes SPECTRA PREMIUM CMP06A and SPECTRA PREMIUM CMP10A.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GPD Fits: 6.7L L6 DIESEL Turbocharged | 2511887 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the turbochargers that compress intake air.
This group shows a single part: GPD 2511887.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.7L L6 DIESEL Turbocharged | 6749049 | 🇺🇸 US 🇨🇦 CA | Exhaust Outlet Elbow | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 International Durastar — DORMAN 6749049.
Turbocharger Speed Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 6.7L L6 DIESEL Turbocharged | 9047146 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger speed sensors. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor.
One part is listed for the 2020 International Durastar — DORMAN 9047146.
Buying Engine Parts for a 2020 International Durastar
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil Pan .
Frequently Asked Questions
How many engine parts fit the 2020 International Durastar?
Our catalog currently lists 8 engine parts for the 2020 International Durastar across 6 subcategories and 5 brands, covering both the 6.7L L6 DIESEL Turbocharged and the 8.9L L6 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2020 International Durastar engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2020 International Durastar?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 International Durastar was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 International Durastar?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 International Durastar
Engine Parts for Other International Durastar Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.