2006 Jeep Commander Electrical Connector Parts

This table covers the harness connectors at the 4WD Disconnect. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S2402.

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2006 Jeep Commander. All of them fit every engine offered in the 2006 Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2006 Jeep Commander, from FOUR SEASONS and GPD. All of them fit every engine offered in the 2006 Commander.

Listed part numbers: FOUR SEASONS 20954 and GPD 1711515.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 ABS Wheel Speed Sensor Connector parts for the 2006 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 3.7L V6 and the 4.7L V8.

Listed part numbers: STANDARD MOTOR PRODUCTS S2346 and WELLS 1P2545.

This table covers the Adapter plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: MOPAR 68021352AA.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, UNITED MOTOR PRODUCTS and 1 other brand. WELLS 1P1694 carries the "Popular" badge. All of them fit every engine offered in the 2006 Commander.

This group includes WELLS 1P1694, STANDARD MOTOR PRODUCTS HP4665 and STANDARD MOTOR PRODUCTS S2034 and the remaining parts above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Alternator / Generator Connector parts for the 2006 Jeep Commander come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand. Every part fits both the 3.7L V6 and the 4.7L V8.

Listed part numbers: ROSTRA 610119, STANDARD MOTOR PRODUCTS S1676 and WALKER PRODUCTS 2701136, plus the other parts above.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Ambient Air Temperature Sensor Connector parts for the 2006 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 2 other brands. The "Popular" part is WALKER PRODUCTS 2701055. Every part fits both the 3.7L V6 and the 4.7L V8.

Listed part numbers: WALKER PRODUCTS 2701055, WELLS 1P1311 and ROSTRA 610056, plus the other parts above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

26 Blower Motor Control Module / Resistor Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, FOUR SEASONS, WELLS and 7 other brands. DORMAN 645217 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the harness connectors at the Brake Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Brake Fluid Level Sensor Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 1 other brand. WELLS 1P1694 carries the "Popular" badge. All of them fit every engine offered in the 2006 Commander.

Part numbers include WELLS 1P1694, ROSTRA 610372 and STANDARD MOTOR PRODUCTS HP4665, among others listed above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2006 Commander.

This group includes STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Camshaft Position Sensor Connector parts for the 2006 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, UNITED MOTOR PRODUCTS and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2099. Every part fits both the 3.7L V6 and the 4.7L V8.

Listed part numbers: STANDARD MOTOR PRODUCTS S2099, ROSTRA 610196 and UNITED MOTOR PRODUCTS CON61, plus the other parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Crankshaft Position Sensor Connector parts for the 2006 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, BECK/ARNLEY, ROSTRA and 3 other brands. The "Popular" part is BECK/ARNLEY 1800715. 1 part fits every engine; the other 6 are engine-specific.

This group includes BECK/ARNLEY 1800715, ROSTRA 610202 and STANDARD MOTOR PRODUCTS S1837 and the remaining parts above.

This table covers the harness connectors at the Cruise Control Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2462.

This table covers the harness connectors at the Deck Lid / Liftgate Ajar Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Deck Lid / Liftgate Ajar Switch Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2006 Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57, plus the other parts above.

This table covers the harness connectors at the Defroster Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Door Lock Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 EGR Valve Connector parts for the 2006 Jeep Commander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1922, UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 4608805AD.

This table covers the harness connectors at the Fog / Driving Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fuel Injector Connector parts for the 2006 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, ACDELCO, GB REMANUFACTURING and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945. Every part fits both the 3.7L V6 and the 4.7L V8.

Part numbers include STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, among others listed above.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Pump / Circuit Opening Relay Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2006 Commander.

Part numbers include STANDARD MOTOR PRODUCTS S1600 and WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Glove Box Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3331.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

STANDARD MOTOR PRODUCTS supplies the 4 Headlamp Wiring Harness / Connector parts for the 2006 Jeep Commander.

Listed part numbers: STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS F90009 and STANDARD MOTOR PRODUCTS LWH106, plus the other parts above.

This table covers the harness connectors at the Heated Window Element. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — WELLS 1P2226.

This table covers the harness connectors at the Horn. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — WELLS 1P1580.

This table covers the harness connectors at the Horn Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the HVAC Control Switch / Panel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: ULTRA-POWER 2701055.

This table covers the harness connectors at the HVAC Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Idle Air Control (IAC) Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Idle Air Control (IAC) Valve Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2053 and WELLS 1P1718.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts for the 2006 Jeep Commander come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand.

This group includes ROSTRA 610156, STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60 and the remaining parts above.

This table covers the harness connectors at the Ignition Starter Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Ignition Starter Switch Connector parts for the 2006 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, BWD/NIEHOFF and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S1768.

This group includes STANDARD MOTOR PRODUCTS S1768, WELLS 1P1558 and BWD/NIEHOFF PT1267 and the remaining parts above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts for the 2006 Jeep Commander come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2816.

This group includes STANDARD MOTOR PRODUCTS S2816, ROSTRA 610107 and ULTRA-POWER 2701095 and the remaining parts above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Oil Pressure Sender / Switch Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 3 other brands. STANDARD MOTOR PRODUCTS HP3925 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS HP3925, WELLS 1P1711 and HOLSTEIN 2HAR0054, among others listed above.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2006 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1932 and WELLS 1P3359.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts for the 2006 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2393 and WELLS 1P2024.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S2079.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radiator Fan Relay Connector parts for the 2006 Jeep Commander come from 4 brands — STANDARD MOTOR PRODUCTS, FOUR SEASONS, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP3810.

Part numbers include STANDARD MOTOR PRODUCTS HP3810, FOUR SEASONS 37210 and STANDARD MOTOR PRODUCTS S654, among others listed above.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies both parts for the 2006 Jeep Commander.

This group includes METRA 7165021 and METRA AXADBXHCH1.

This table covers the harness connectors at the Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Relay Connector parts are listed for the 2006 Jeep Commander, from ROSTRA and WELLS.

Listed part numbers: ROSTRA 610587 and WELLS 1P1212.

This table covers the Repair harnesses. Read more

2 Repair Harness parts for the 2006 Jeep Commander come from ROSTRA.

Part numbers include ROSTRA 3500172 and ROSTRA 3500170.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — WELLS 1P1311.

This table covers the harness connectors at the Starter Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Starter Motor Connector parts for the 2006 Jeep Commander come from 3 brands — FAMOUS BRAND, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: FAMOUS BRAND PTA3009, STANDARD MOTOR PRODUCTS S1600 and WELLS 1P2226.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3075.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Temperature Sender / Sensor Connector parts for the 2006 Jeep Commander come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, WELLS and 3 other brands. The "Popular" part is WALKER PRODUCTS 2701055.

Listed part numbers: WALKER PRODUCTS 2701055, WELLS 1P1311 and FOUR SEASONS 70013, plus the other parts above.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Throttle Position Sensor (TPS) Connector parts are listed for the 2006 Jeep Commander, from STANDARD MOTOR PRODUCTS, WELLS, DORMAN and 3 other brands. STANDARD MOTOR PRODUCTS S1905 carries the "Popular" badge.

This group includes STANDARD MOTOR PRODUCTS S1905, WELLS 1P1818 and DORMAN 645233 and the remaining parts above.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 57300.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Trailer Connector parts are listed for the 2006 Jeep Commander, from TEKONSHA, STANDARD MOTOR PRODUCTS, CURT and 1 other brand. STANDARD MOTOR PRODUCTS TC556 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS TC556, WELLS 4T1217 and CURT 55381, among others listed above.

This table covers the harness connectors at the Trailer Tow Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1600.

This table covers the harness connectors at the Transmission-Automatic Axle Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1600.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

One part is listed for the 2006 Jeep Commander — WELLS 1P4037.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Vapor Canister Purge Valve / Solenoid Connector parts for the 2006 Jeep Commander come from 4 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.

Part numbers include STANDARD MOTOR PRODUCTS S2052, UNITED MOTOR PRODUCTS CON58 and WALKER PRODUCTS 2701132, among others listed above.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Vapor Leak Detection Pump Connector parts for the 2006 Jeep Commander come from 4 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN, ROSTRA and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS HP3925.

Part numbers include STANDARD MOTOR PRODUCTS HP3925, HOLSTEIN 2HAR0054 and ROSTRA 610163, among others listed above.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2843.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Washer Pump Connector parts for the 2006 Jeep Commander come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1918 and WELLS 1P3333.

This table covers the harness connectors at the Window Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Window Motor Connector parts are listed for the 2006 Jeep Commander, from WELLS, ROSTRA, STANDARD MOTOR PRODUCTS and 1 other brand. WELLS 1P1711 carries the "Popular" badge.

Listed part numbers: WELLS 1P1711, ROSTRA 610090 and STANDARD MOTOR PRODUCTS S1922, plus the other parts above.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Wiper Motor Connector parts for the 2006 Jeep Commander come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1922, STANDARD MOTOR PRODUCTS S1600 and UNITED MOTOR PRODUCTS CON50, plus the other parts above.

This table covers the harness connectors at the Yaw Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2006 Jeep Commander — STANDARD MOTOR PRODUCTS S1271.