1975 Jensen Interceptor Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

3 Band parts for the 1975 Jensen Interceptor come from 3 brands — ATP, BORG-WARNER and PIONEER.

Part numbers include ATP TX47, BORG-WARNER 16355BW and PIONEER 767026.

This table covers the bushings in this assembly. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Bushing parts are listed for the 1975 Jensen Interceptor, from ATP and PIONEER.

Part numbers include ATP TB18 and PIONEER 755106.

This table covers the Bushing kits. Read more

One part is listed for the 1975 Jensen Interceptor — ATP TBS2.

This table covers the seals at the Clutch Pack Piston Dam. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Clutch Pack Piston Dam / Seal parts for the 1975 Jensen Interceptor come from 2 brands — ATP and PIONEER.

Part numbers include ATP TO18, ATP TO22 and PIONEER 758013, among others listed above.

This table covers the related components grouped with this assembly. Read more

SONNAX supplies the 5 Components parts for the 1975 Jensen Interceptor. SONNAX 2291201K carries the "Popular" badge.

Listed part numbers: SONNAX 2291201K, SONNAX 22960 and SONNAX 2277112K, plus the other parts above.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

3 Extension Housing Bushing parts are listed for the 1975 Jensen Interceptor, from ATP, DURA-BOND and PIONEER.

This group includes ATP TB15, DURA-BOND RP6189T and PIONEER 755014.

This table covers the gaskets that seal the Extension Housing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Extension Housing Gasket parts for the 1975 Jensen Interceptor come from 2 brands — ATP and PIONEER.

This group includes ATP TG15 and PIONEER 749052.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Extension Housing Seal parts for the 1975 Jensen Interceptor come from 5 brands — WJB / INMOTION PARTS, NATIONAL, ATP and 2 other brands. The "Popular" part is NATIONAL 7300S.

This group includes NATIONAL 7300S, WJB / INMOTION PARTS WS7300S and ATP HO8 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts are listed for the 1975 Jensen Interceptor, from ATP and PIONEER. ATP TF42 carries the "Popular" badge.

In the Economy grade, ATP supplies 1 part: the catalog's value-priced group. A representative part number is ATP TF42.

The Standard Replacement section lists 5 options from ATP and PIONEER — built to original-equipment specification. ATP B42 is listed in this group.

Part numbers include ATP TF42, ATP B42 and ATP JX150, among others listed above.

This table covers the pans that hold automatic-transmission fluid. Read more

This group shows a single part: ATP 103019.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Fluid Pan Gasket parts are listed for the 1975 Jensen Interceptor, from MAHLE / CLEVITE, FEL-PRO, ATP and 2 other brands. FEL-PRO TOS18583 carries the "Popular" badge.

Listed part numbers: FEL-PRO TOS18583, MAHLE / CLEVITE W39003TC and ATP TG10, plus the other parts above.

This table covers the Fluid Pump bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Fluid Pump Bushing parts are listed for the 1975 Jensen Interceptor, from DURA-BOND, ATP and PIONEER.

Part numbers include ATP TB11, DURA-BOND DOT21T and DURA-BOND DOT21TG, among others listed above.

This table covers the gaskets that seal the Fluid Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Fluid Pump Gasket parts for the 1975 Jensen Interceptor come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP TG11 and PIONEER 749083.

This table covers the Fluid Pump O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Fluid Pump O-Ring parts are listed for the 1975 Jensen Interceptor, from ATP and PIONEER.

Listed part numbers: ATP TO7 and PIONEER 760017.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

3 Fluid Pump Repair Sleeve parts for the 1975 Jensen Interceptor come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS88187, NATIONAL 99187 and WJB / INMOTION PARTS WS99187.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Fluid Pump Seal parts for the 1975 Jensen Interceptor come from 5 brands — NATIONAL, ATP, BCA and 2 other brands. The "Popular" part is NATIONAL 331227H.

Listed part numbers: NATIONAL 331227H, ATP TO8 and BCA NS331227H, plus the other parts above.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts for the 1975 Jensen Interceptor come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP TR17 and PIONEER 761029.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 1975 Jensen Interceptor come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS8609, NATIONAL 8609 and WJB / INMOTION PARTS WS8609.

This table covers the rebuild kits for this assembly. Read more

7 Rebuild Kit parts for the 1975 Jensen Interceptor come from 2 brands — PIONEER and ATP. The "Popular" part is PIONEER 753040.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PIONEER — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PIONEER 753040 is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, ATP and PIONEER supply 3 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is ATP TMS14.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 3 options from PIONEER and ATP — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. ATP TGS23 is listed in this group.

Listed part numbers: PIONEER 753040, ATP TMS14 and ATP TM14, plus the other parts above.

This table covers the Shift Improvement kits. Read more

6 Shift Improvement Kit parts are listed for the 1975 Jensen Interceptor, from TRANSGO, PIONEER and ATP. TRANSGO SKTFSC carries the "Popular" badge.

The Daily Driver section lists 2 options from TRANSGO and PIONEER — grouped for everyday commuting duty. TRANSGO SKTFSC is listed in this group.

The Heavy Duty section lists 1 option from ATP — rated for severe service. ATP TK2 is listed in this group.

In the High Performance grade, TRANSGO supplies 3 parts: engineered beyond original-equipment specification. A representative part number is TRANSGO TF2.

Listed part numbers: TRANSGO SKTFSC, PIONEER 765011 and ATP TK2, plus the other parts above.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Shift Shaft Seal parts for the 1975 Jensen Interceptor come from 3 brands — ATP, PIONEER and SCHAEFFLER.

This group includes ATP TO15, PIONEER 759037 and SCHAEFFLER SS2178.

This table covers the one-way sprag clutches in the transmission. Read more

2 Sprag parts for the 1975 Jensen Interceptor come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP TX22 and PIONEER 763002.

This table covers the Stator Support Shaft bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Stator Support Shaft Bushing parts are listed for the 1975 Jensen Interceptor, from ATP and PIONEER.

Part numbers include ATP TB19 and PIONEER 755109.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

VALVOLINE supplies the 3 Transmission Fluid parts for the 1975 Jensen Interceptor.

This group includes VALVOLINE VV3246, VALVOLINE 773775 and VALVOLINE 881051.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts are listed for the 1975 Jensen Interceptor, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

This group includes LUBEGARD 19610, LUBEGARD 60902 and ATP AT202 and the remaining parts above.