2011 Kia Borrego Cooling System Parts

This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator. Read more

16 Coolant / Antifreeze parts are listed for the 2011 Kia Borrego, from PRESTONE, PEAK, VALVOLINE and 2 other brands. FVP MV5050GAL carries the "Popular" badge. All of them fit every engine offered in the 2011 Borrego.

The Compatible With All Colors section lists 1 option from PRESTONE — grouped under the catalog's "Compatible With All Colors" designation — the notes column spells out what sets them apart. PRESTONE AF3055 is listed in this group.

In the Economy grade, FVP, PEAK, PRESTONE and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP MV5050GAL.

The Heavy Duty section lists 1 option from PRESTONE — rated for severe service. PRESTONE AFC12100 is listed in this group.

The Premium section lists 5 options from PRESTONE and PEAK — a step above OE specification in materials, tolerances or warranty terms. PRESTONE AF2100 is listed in this group.

The Standard Replacement section lists 5 options from VALVOLINE, AISIN and PEAK — built to original-equipment specification. VALVOLINE ZXEL1 is listed in this group.

This table covers the seals at the Coolant Hose / Pipe. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Coolant Hose / Pipe Seal parts for the 2011 Kia Borrego come from 2 brands — FEL-PRO and VICTOR REINZ.

Listed part numbers: FEL-PRO 35959 and VICTOR REINZ 711359400.

This table covers the Coolant Hose Connector flanges. Read more

One part is listed for the 2011 Kia Borrego — FOUR SEASONS 86349.

This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Coolant Reservoir Cap parts for the 2011 Kia Borrego come from 3 brands — CALORSTAT, DORMAN and MOTORAD. Every part fits both the 3.8L V6 and the 4.6L V8.

Listed part numbers: CALORSTAT RC0161, DORMAN 54018 and MOTORAD T163.

This table covers the Coolant Water Crossover Mounting sets. Read more

2 Coolant Water Crossover Mounting Set parts are listed for the 2011 Kia Borrego, from FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO ES72971 and VICTOR REINZ 181015601.

This table covers the Cooling Fan control modules. Read more

3 Cooling Fan Control Module parts for the 2011 Kia Borrego come from US MOTOR WORKS. Every part fits both the 3.8L V6 and the 4.6L V8.

Listed part numbers: US MOTOR WORKS 16749, US MOTOR WORKS 16789 and US MOTOR WORKS 16795.

This table covers the adapters used to pressure-test this cooling system. Read more

3 Cooling System Tester Adapter parts are listed for the 2011 Kia Borrego, from MOTORAD and STANT. All of them fit every engine offered in the 2011 Borrego.

This group includes MOTORAD 3121, MOTORAD 3122 and STANT 12021.

This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap. Read more

3 Radiator parts are listed for the 2011 Kia Borrego, from TECHPRO, FVP and OSC.

Economy: 1 part, from TECHPRO. A representative part number is TECHPRO KI3010158.

The Standard Replacement section: 2 options from FVP and OSC. FVP RAD13073 is listed in this group.

Part numbers include TECHPRO KI3010158, FVP RAD13073 and OSC 13073.

This table covers the caps that hold system pressure at the radiator or reservoir neck. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

5 Radiator Cap parts are listed for the 2011 Kia Borrego, from MOTORAD, CALORSTAT, DORMAN and 1 other brand. MOTORAD T16R carries the "Popular" badge.

The Locking Replacement section lists 1 option from MOTORAD — grouped under the catalog's "Locking Replacement" designation — the notes column spells out what sets them apart. MOTORAD ST16R is listed in this group.

The Standard Replacement section: 4 options from MOTORAD, CALORSTAT, DORMAN and 1 other brand. MOTORAD T16R is listed in this group.

Part numbers include MOTORAD T16R, MOTORAD ST16R and CALORSTAT RC0027, among others listed above.

This table covers the Radiator Fan clutches. Typical signs include slip at highway speed, chatter on takeoff, or a pedal that stays low. Resurface or replace the flywheel with the clutch — a heat-checked flywheel wastes the new disc. Read more

2 Radiator Fan Clutch parts are listed for the 2011 Kia Borrego, from FVP and GMB.

Part numbers include FVP 9461580, among others listed above.

This table covers the upper, lower and connecting hoses between radiator, engine and reservoir. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

2 Radiator Hose parts for the 2011 Kia Borrego come from CONTINENTAL.

Part numbers include CONTINENTAL 66486 and CONTINENTAL 66988.

This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender. Read more

4 Temperature Sender / Sensor parts are listed for the 2011 Kia Borrego, from GPD, HOLSTEIN, STANDARD MOTOR PRODUCTS and 1 other brand.

Economy: 2 parts, from GPD and HOLSTEIN. A representative part number is GPD 1712632.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WELLS. STANDARD MOTOR PRODUCTS TX192 is listed in this group.

This group includes GPD 1712632, HOLSTEIN 2CTS0137 and STANDARD MOTOR PRODUCTS TX192 and the remaining parts above.

This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part. Read more

2 Thermostat parts for the 2011 Kia Borrego come from 2 brands — DORMAN and MOTORAD.

The Economy section: 1 option from DORMAN. DORMAN 9025181 is listed in this group.

Standard Replacement: 1 part, from MOTORAD. A representative part number is MOTORAD 933180.

Listed part numbers: DORMAN 9025181 and MOTORAD 933180.

This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off. Read more

2 Water Pump parts for the 2011 Kia Borrego come from 2 brands — AISIN and DAYCO.

This group includes AISIN WPK824 and DAYCO DP1873.