The 2011 Kia Borrego has 37 electrical connector parts with verified fitment on this page — 21 part types and 11 brands, covering both the 3.8L V6 and the 4.6L V8. Each part includes a manufacturer part number and application notes.
On the 2011 Kia Borrego, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. Most of the listed parts are Blower Motor Control Module / Resistor Connector (5 parts), Fog / Driving Lamp Connector (5 parts) and Trailer Connector (5 parts). The other 18 part types cover the remaining 22 parts.
The 2011 Kia Borrego was sold with both the 3.8L V6 and the 4.6L V8. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2011 Kia Borrego electrical connector parts are STANDARD MOTOR PRODUCTS (12 parts), WELLS (9 parts) and CURT (5 parts), plus 8 more brands.
3 parts on this 2011 Kia Borrego page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including WELLS 1P1789 (Blower Motor Control Module / Resistor Connector) and STANDARD MOTOR PRODUCTS S553 (Fog / Driving Lamp Connector). Click any part number to see every vehicle that part fits.
A/C Compressor Clutch Coil Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S3077 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — STANDARD MOTOR PRODUCTS S3077.
Accelerator Pedal Position Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S3262 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — STANDARD MOTOR PRODUCTS S3262.
Blower Motor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S3205 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — STANDARD MOTOR PRODUCTS S3205.
Blower Motor Control Module / Resistor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Popular Fits: 4.6L V8 | 1P1789 | 🇨🇦 CA | Terminal Quantity: 4Wire Quantity: 8 | View on Amazon |
| FOUR SEASONS Fits: 4.6L V8 | 37257 | 🇨🇦 CA | 4 Terminal Malewith Male Lock Tab | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | HP4145 | 🇨🇦 CA | HandypackConnector Shape: Rectangle | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S1519 | 🇨🇦 CA | Connector Shape: RectangleContact Terminal Material: Metal | View on Amazon |
| UNITED MOTOR PRODUCTS Fits: 4.6L V8 | CON24 | 🇨🇦 CA | Terminal Gender: FemaleTerminal Quantity: 4 | View on Amazon |
This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
5 Blower Motor Control Module / Resistor Connector parts for the 2011 Kia Borrego come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, FOUR SEASONS and 1 other brand. The "Popular" part is WELLS 1P1789.
This group includes WELLS 1P1789, FOUR SEASONS 37257 and STANDARD MOTOR PRODUCTS HP4145 and the remaining parts above.
Brake Light Switch Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S1785 | 🇨🇦 CA | Connector Shape: RectangleWiring Harness Length (In): 12.5 | View on Amazon |
This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
This group shows a single part: STANDARD MOTOR PRODUCTS S1785.
Camshaft Position Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Fits: 4.6L V8 | 2701089 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — WALKER PRODUCTS 2701089.
Crankshaft Position Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.6L V8 | 1P3445 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — WELLS 1P3445.
Fog / Driving Lamp Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: 4.6L V8 | S553 | 🇨🇦 CA | Connector Shape: OvalContact Terminal Material: Metal | View on Amazon |
| ACDELCO Fits: 4.6L V8 | PT2298 | 🇺🇸 US 🇨🇦 CA | GoldHeight (In): 1.5 in | View on Amazon |
| SKP Fits: 4.6L V8 | SKS553 | 🇨🇦 CA | Fits Black and Blu | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | HP3835 | 🇨🇦 CA | HandypackConnector Shape: Oval | View on Amazon |
| WELLS Fits: 4.6L V8 | 1P1032 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
5 Fog / Driving Lamp Connector parts are listed for the 2011 Kia Borrego, from STANDARD MOTOR PRODUCTS, ACDELCO, SKP and 1 other brand. STANDARD MOTOR PRODUCTS S553 carries the "Popular" badge.
Part numbers include STANDARD MOTOR PRODUCTS S553, ACDELCO PT2298 and SKP SKS553, among others listed above.
Fuel Injector Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.6L V8 | 1P4050 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — WELLS 1P4050.
Fuel Tank Pressure Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S3121 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
This group shows a single part: STANDARD MOTOR PRODUCTS S3121.
Headlamp Wiring Harness / Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | LWH110 | 🇨🇦 CA | Blue StreakHigh Temperature | View on Amazon |
This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape.
This group shows a single part: STANDARD MOTOR PRODUCTS LWH110.
Ignition Coil Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S1441 | 🇨🇦 CA | Splice Connectors Included: Yes | View on Amazon |
| UNITED MOTOR PRODUCTS Fits: 4.6L V8 | CON21 | 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS Fits: 4.6L V8 | 2701126 | 🇨🇦 CA | Terminal Gender: Male | View on Amazon |
| WELLS Fits: 4.6L V8 | 1P1680 | 🇨🇦 CA | View on Amazon |
This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
4 Ignition Coil Connector parts are listed for the 2011 Kia Borrego, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.
Listed part numbers: STANDARD MOTOR PRODUCTS S1441, UNITED MOTOR PRODUCTS CON21 and WALKER PRODUCTS 2701126, plus the other parts above.
Inline Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.6L V8 | 1P4063 | 🇨🇦 CA | to Fog Light, with 1 Terminal | View on Amazon |
This table covers the harness connectors at the Inline. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
This group shows a single part: WELLS 1P4063.
Knock / Detonation Sensor Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.6L V8 | 1P2044 | 🇨🇦 CA | Rear | View on Amazon |
This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — WELLS 1P2044.
Radio Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| METRA Fits: 4.6L V8 | AXUSBHK2 | 🇨🇦 CA | USB Adapter Cable Harness | View on Amazon |
This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
This group shows a single part: METRA AXUSBHK2.
Repair Harness
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROSTRA Fits: 4.6L V8 | 3500168 | 🇨🇦 CA | 6 speed trans.External Wire Repair Kit with Connector | View on Amazon |
This table covers the Repair harnesses.
One part is listed for the 2011 Kia Borrego — ROSTRA 3500168.
Trailer Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CURT Popular Fits: 4.6L V8 | 55415 | 🇨🇦 CA | Replacement 7-Way RV Blade OEM Socket | View on Amazon |
| CURT Fits: 4.6L V8 | 57015 | 🇨🇦 CA | OEM Replacement Dual-Output 7 and 4 Way ConnectorPlugs Into USCAR Socket | View on Amazon |
| CURT Fits: 4.6L V8 | 55384 | 🇨🇦 CA | Custom Wiring Connector4-Way Flat | View on Amazon |
| CURT Fits: 4.6L V8 | 57020 | 🇨🇦 CA | OEM Replacement Dual-Output 7 and 4 Way ConnectorPackaged | View on Amazon |
| TEKONSHA Fits: 4.6L V8 | 118384 | 🇨🇦 CA | T-One Connector Assembly | View on Amazon |
This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
5 Trailer Connector parts for the 2011 Kia Borrego come from 2 brands — CURT and TEKONSHA. The "Popular" part is CURT 55415.
Listed part numbers: CURT 55415, CURT 57015 and CURT 55384, plus the other parts above.
Trailer Extension Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CURT Fits: 4.6L V8 | 56475 | 🇨🇦 CA | Custom Wiring Harness Extension | View on Amazon |
This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — CURT 56475.
Transmission-Automatic Wiring Harness / Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ROSTRA Fits: 4.6L V8 | 3500176 | 🇨🇦 CA | 6 speed trans.WIRE HARNESS CONNECTOR SOCKET | View on Amazon |
This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape.
This group shows a single part: ROSTRA 3500176.
Vapor Canister Purge Valve / Solenoid Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 4.6L V8 | S1414 | 🇨🇦 CA | Connector Shape: RectangleTerminal Type: Blade | View on Amazon |
| WELLS Fits: 4.6L V8 | 1P2045 | 🇨🇦 CA | Wiring Harness Length: 17.0 In | View on Amazon |
This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
2 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2011 Kia Borrego, from STANDARD MOTOR PRODUCTS and WELLS.
Listed part numbers: STANDARD MOTOR PRODUCTS S1414 and WELLS 1P2045.
Vapor Canister Vent Valve / Solenoid Connector
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.6L V8 | 1P1362 | 🇨🇦 CA | Connector Shape: OblongTerminal Quantity: 2 | View on Amazon |
This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.
One part is listed for the 2011 Kia Borrego — WELLS 1P1362.
Buying Electrical Connector Parts for a 2011 Kia Borrego
On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.
- Match the engine first. Every electrical connector part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Blower Motor Control Module / Resistor Connector and Fog / Driving Lamp Connector .
Frequently Asked Questions
How many electrical connector parts fit the 2011 Kia Borrego?
Our catalog currently lists 37 electrical connector parts for the 2011 Kia Borrego across 21 subcategories and 11 brands, covering both the 3.8L V6 and the 4.6L V8. Each part is matched to the engine(s) it fits.
Do electrical connector parts differ between 2011 Kia Borrego engines?
Yes. Every electrical connector part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of electrical connector problems on a 2011 Kia Borrego?
Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Kia Borrego was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Kia Borrego?
First match the engine — each row shows which engine(s) the part fits. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Kia Borrego
Electrical Connector Parts for Other Kia Borrego Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.