2021 Kia Stinger Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2021 Kia Stinger, from TOPLINE and ENGINETECH.

This group includes ENGINETECH BB1004, TOPLINE RBHY11L and TOPLINE RBHY14L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts are listed for the 2021 Kia Stinger, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 54310000, AJUSA 54350800 and MAHLE / CLEVITE CS55400.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2021 Kia Stinger come from TOPLINE.

This group includes TOPLINE TWHY11, TOPLINE MBHY11L and TOPLINE TWHY14 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Crankshaft Seal parts for the 2021 Kia Stinger come from 5 brands — AJUSA, MAHLE / CLEVITE, ELRING and 2 other brands. The "Popular" part is AJUSA 15052700.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts are listed for the 2021 Kia Stinger, from MAHLE / CLEVITE, AJUSA, TOPLINE and 1 other brand. MAHLE / CLEVITE GS33547 carries the "Popular" badge.

Part numbers include MAHLE / CLEVITE GS33547, AJUSA 81045900 and AJUSA 81056400, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Cylinder Head Gasket parts are listed for the 2021 Kia Stinger, from AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 10252100, AJUSA 10284100 and AJUSA 10284200, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2021 Kia Stinger, from AJUSA, ELRING, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 52582200, AJUSA 52689400 and ELRING B24510, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2021 Kia Stinger, from AJUSA and ELRING.

Listed part numbers: AJUSA 50530500, AJUSA 50609700 and ELRING B24500.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V5836.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

One part is listed for the 2021 Kia Stinger — WELLS 5T5017.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2021 Kia Stinger, from HYUNDAI, ACKOJA and HL MANDO. 1 part fits every engine; the other 3 are engine-specific.

Part numbers include ACKOJA A520620, HL MANDO 30A5034 and HYUNDAI 231243LTA0, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts are listed for the 2021 Kia Stinger, from AJUSA, ELRING and MAHLE / CLEVITE.

Part numbers include AJUSA 13293800, AJUSA 02025900 and AJUSA 13362100, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Intake Valve parts for the 2021 Kia Stinger come from 4 brands — MELLING, SBI, TOPLINE and 1 other brand.

Part numbers include MELLING V3255, MELLING V3286 and QUALCAST 1013190, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

95 Oil parts for the 2021 Kia Stinger come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, LUCAS OIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts for the 2021 Kia Stinger come from 4 brands — AUTOTECNICA, DORMAN, GPD and 1 other brand. 1 part fits every engine; the other 3 are engine-specific.

Part numbers include AUTOTECNICA HY1421719, DORMAN 918907 and GPD 2611480, among others listed above.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2021 Kia Stinger come from 3 brands — DORMAN, REIN and SKP. Every part fits both the 2.0L L4 Turbocharged and the 3.3L V6 Turbocharged.

Part numbers include DORMAN 090033, DORMAN 090053 and REIN HWU0110, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2021 Kia Stinger, from DORMAN, AJUSA, ELRING and 2 other brands. DORMAN 095147 carries the "Popular" badge. 4 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2021 Kia Stinger come from 3 brands — CALORSTAT, MOTORAD and SKP. 1 part fits every engine; the other 2 are engine-specific.

This group includes CALORSTAT OC2331, MOTORAD MO151 and SKP SKMO151.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2021 Kia Stinger — ELRING 453020.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

24 Oil Filter parts for the 2021 Kia Stinger come from 16 brands — VARIOUS MFR, WIX, BOSCH and 13 other brands. The "Popular" part is MOBIL M1104A.

The Economy section lists 9 options from PRO-TEC, BOSCH, CHAMP / LUBER-FINER and 5 other brands — the catalog's value-priced group. BOSCH 72228WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1104A is listed in this group.

In the Standard Replacement grade, VARIOUS MFR, WIX, HENGST and 6 other brands supply 13 parts: built to original-equipment specification. A representative part number is BOSCH 3312.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2021 Kia Stinger — MAHLE / CLEVITE B33332.

This table covers the Oil Filter covers. Read more

One part is listed for the 2021 Kia Stinger — ACKOJA A520915.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Filter Housing Seal parts for the 2021 Kia Stinger come from 2 brands — ELRING and MAHLE / CLEVITE.

This group includes ELRING B24420 and MAHLE / CLEVITE GS33924.

This table covers the Oil nozzles. Read more

This group shows a single part: MELLING 5470N.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2021 Kia Stinger, from CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES C557, MELLING 1103 and S.A. GEAR C1239.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Oil Pump Chain Tensioner parts for the 2021 Kia Stinger come from 4 brands — MELLING, CLOYES, HYUNDAI and 1 other brand.

Part numbers include CLOYES 96259, HYUNDAI 244712CTC0 and MELLING BT7066, among others listed above.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2021 Kia Stinger — MELLING S1327.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 2021 Kia Stinger, from ENGINETECH and TOPLINE.

The Premium section lists 2 options from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P2024 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE PAHY20GT is listed in this group.

Part numbers include ENGINETECH P2024, ENGINETECH K20244P and TOPLINE PAHY20GT.

This table covers the rings that seal each piston to the cylinder wall. Read more

3 Piston Ring parts are listed for the 2021 Kia Stinger, from ENGINETECH and TOPLINE.

The Premium section: 2 options from ENGINETECH. ENGINETECH S86124 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE RSHY20GT is listed in this group.

Part numbers include ENGINETECH S86124, ENGINETECH M86024 and TOPLINE RSHY20GT.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: HYUNDAI 244702G803.

This table covers the timing chains that keep the cams in time with the crank. Read more

7 Timing Chain parts are listed for the 2021 Kia Stinger, from CLOYES, MELLING, S.A. GEAR and 1 other brand.

This group includes CLOYES C976, CLOYES C555 and HYUNDAI 243222CTC0 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

8 Timing Chain & Component Kit parts for the 2021 Kia Stinger come from 4 brands — S.A. GEAR, INA, MELLING and 1 other brand.

The Economy section: 3 options from S.A. GEAR. S.A. GEAR 76311TS is listed in this group.

Standard Replacement: 5 parts, from INA, MELLING and CLOYES. A representative part number is CLOYES 90555SGX.

Part numbers include S.A. GEAR 76311TS, S.A. GEAR 76457T and S.A. GEAR 76483S, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

15 Timing Chain Guide / Damper parts are listed for the 2021 Kia Stinger, from CLOYES, S.A. GEAR, HYUNDAI and 2 other brands. S.A. GEAR 91194 carries the "Popular" badge.