2023 Kia Stinger Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Stinger — AJUSA 54350800.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2023 Kia Stinger come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 15048600, AJUSA 15096600 and ELRING 827070, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2023 Kia Stinger — AJUSA 81056400.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies the 4 Cylinder Head Gasket parts for the 2023 Kia Stinger.

Part numbers include AJUSA 10284100, AJUSA 10284200 and AJUSA 52689500, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Stinger — AJUSA 52689400.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2023 Kia Stinger — AJUSA 50609700.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2023 Kia Stinger — HL MANDO 30A5029.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2023 Kia Stinger, from AJUSA and ELRING.

Part numbers include AJUSA 02025900, AJUSA 13362100 and ELRING 827250.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2023 Kia Stinger come from 2 brands — MELLING and SBI.

Part numbers include MELLING V3286 and SBI 13286.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

24 Oil parts for the 2023 Kia Stinger come from 6 brands — MOBIL, LIQUI MOLY, IDEMITSU and 3 other brands. The "Popular" part is MOBIL 125195.

The Full Synthetic section lists 13 options from MOBIL, IDEMITSU, LIQUI MOLY and 2 other brands — full-synthetic oils. MOBIL 125195 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL supplies 3 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125201.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2023 Kia Stinger come from 3 brands — DORMAN, REIN and SKP.

Listed part numbers: DORMAN 090033, DORMAN 090053 and REIN HWU0110, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2023 Kia Stinger, from DORMAN and AJUSA. 2 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: AJUSA 22007100, DORMAN 095147 and DORMAN 995147CD.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2023 Kia Stinger come from 4 brands — MOTORAD, CALORSTAT, GATES and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 2023 Kia Stinger come from 9 brands — CHAMP / LUBER-FINER, VARIOUS MFR, WIX and 6 other brands. The "Popular" part is VARIOUS MFR PO99470EX.

The Economy section lists 5 options from CHAMP / LUBER-FINER, FAMOUS BRAND, PRO-TEC and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER P1100 is listed in this group.

In the Standard Replacement grade, VARIOUS MFR, WIX, BECK/ARNLEY and 2 other brands supply 7 parts: built to original-equipment specification. A representative part number is VARIOUS MFR PO99470EX.

This table covers the Oil Filter covers. Read more

One part is listed for the 2023 Kia Stinger — ACKOJA A520915.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2023 Kia Stinger, from CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES C557, MELLING 1103 and S.A. GEAR C1239.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2023 Kia Stinger come from 3 brands — CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES 96259, MELLING BT7081 and S.A. GEAR 91421.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2023 Kia Stinger — MELLING S1327.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2023 Kia Stinger, from MELLING, CLOYES and S.A. GEAR.

Listed part numbers: CLOYES C555, MELLING 1101 and MELLING 1098, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts for the 2023 Kia Stinger come from 3 brands — MELLING, S.A. GEAR and CLOYES.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76483S is listed in this group.

Standard Replacement: 3 parts, from MELLING and CLOYES. A representative part number is CLOYES 90555SGX.

1 further part sits outside the graded sections, with the same engine-level match.

This group includes S.A. GEAR 76483S, CLOYES 90555SGX and MELLING 31098SX and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

12 Timing Chain Guide / Damper parts are listed for the 2023 Kia Stinger, from CLOYES, MELLING, S.A. GEAR and 2 other brands. S.A. GEAR 71283 carries the "Popular" badge. 1 part fits every engine; the other 11 are engine-specific.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

7 Timing Chain Tensioner parts for the 2023 Kia Stinger come from 6 brands — MELLING, HYUNDAI, S.A. GEAR and 3 other brands. The "Popular" part is HYUNDAI 244103CGA3.

This group includes HYUNDAI 244103CGA3, S.A. GEAR 91378 and CLOYES 96252 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 935810.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts for the 2023 Kia Stinger come from 2 brands — MELLING and HYUNDAI.

Listed part numbers: HYUNDAI 231213L100, MELLING S1332 and MELLING S1328, plus the other parts above.

This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2023 Kia Stinger — WELLS 5S15729.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2023 Kia Stinger.

Listed part numbers: AJUSA JTC12891 and AJUSA JTC12892.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: AJUSA OP11249.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2023 Kia Stinger come from 2 brands — AJUSA and BECK/ARNLEY.

Part numbers include AJUSA 11156100, AJUSA 11156200 and BECK/ARNLEY 0362108, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

This group shows a single part: SBI 1403152.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: HYUNDAI 222263CCC0.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2023 Kia Stinger, from MELLING and SBI. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: MELLING VL1060 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2023 Kia Stinger come from 4 brands — AJUSA, ELRING, FEL-PRO and 1 other brand.

Listed part numbers: AJUSA 12025500, AJUSA 57062800 and ELRING 827330, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2023 Kia Stinger come from 5 brands — HYUNDAI, STANDARD MOTOR PRODUCTS, HOLSTEIN and 2 other brands. The "Popular" part is HYUNDAI 243603CAA2.

The Economy section: 3 options from HOLSTEIN and WELLS. HOLSTEIN 2VTS0330 is listed in this group.

Standard Replacement: 7 parts, from HYUNDAI, CLOYES and STANDARD MOTOR PRODUCTS. A representative part number is HYUNDAI 243603CAA2.

1 further part sits outside the graded sections, with the same engine-level match.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts for the 2023 Kia Stinger come from 4 brands — HYUNDAI, SKP, AUTOTECNICA and 1 other brand. The "Popular" part is SKP SK998015.

The Economy section: 2 options from SKP and AUTOTECNICA. SKP SK998015 is listed in this group.

Standard Replacement: 3 parts, from HYUNDAI and PREFERRED COMPONENTS INC. A representative part number is HYUNDAI 243503L100.

This group includes SKP SK998015, AUTOTECNICA HY1421805 and HYUNDAI 243503L100 and the remaining parts above.