2021 Kia Telluride Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 2021 Kia Telluride, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH BB1004 and TOPLINE RBHY14L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2021 Kia Telluride, from AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 54307900 and MAHLE / CLEVITE CS55452.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2021 Kia Telluride come from TOPLINE.

Listed part numbers: TOPLINE TWHY14 and TOPLINE MBHY14L.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2021 Kia Telluride come from 3 brands — MAHLE / CLEVITE, AJUSA and SKF. The "Popular" part is MAHLE / CLEVITE 67874.

Part numbers include MAHLE / CLEVITE 67874, AJUSA 15048600 and AJUSA 15096600, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2021 Kia Telluride — AJUSA 81082200.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2021 Kia Telluride, from AJUSA and ELRING. ELRING 204920 carries the "Popular" badge.

Part numbers include ELRING 204920, AJUSA 10261800 and AJUSA 10261900, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts are listed for the 2021 Kia Telluride, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 52605400 and MAHLE / CLEVITE HS55452.

This table covers the Engine covers. Read more

2 Engine Cover parts are listed for the 2021 Kia Telluride, from TECHPRO and VARIOUS MFR.

Listed part numbers: TECHPRO KI1228176, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 Kia Telluride — AJUSA 50548500.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2021 Kia Telluride come from 4 brands — MELLING, QUALCAST, SBI and 1 other brand.

Listed part numbers: MELLING V3287, QUALCAST 1013287 and SBI 13287, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts are listed for the 2021 Kia Telluride, from ATP, DAYCO, HL MANDO and 1 other brand.

This group includes ATP 102222, DAYCO PB1528N and HL MANDO 30A5015 and the remaining parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

3 Intake Manifold parts for the 2021 Kia Telluride come from 2 brands — ACKOJA and HYUNDAI.

Listed part numbers: ACKOJA A520165, ACKOJA A520160 and HYUNDAI 283103CFA0.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2021 Kia Telluride, from MAHLE / CLEVITE, FEL-PRO and AJUSA. MAHLE / CLEVITE MS20317 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE MS20317, AJUSA 13273700 and FEL-PRO MS98024, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01503900.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2021 Kia Telluride come from 3 brands — MELLING, SBI and TOPLINE.

Part numbers include MELLING V3286, SBI 13286 and TOPLINE IVHY14.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2021 Kia Telluride come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Part numbers include ANCHOR 10249, DEA / MARMON RIDE CONTROL A71108 and PIONEER 610249, among others listed above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2021 Kia Telluride come from ANCHOR.

Part numbers include ANCHOR 300920 and ANCHOR 300921.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

68 Oil parts for the 2021 Kia Telluride come from 7 brands — VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. The "Popular" part is MOBIL 125195. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 42 parts.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2021 Kia Telluride come from 4 brands — DORMAN, AGS, REIN and 1 other brand. The "Popular" part is DORMAN 090033.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2021 Kia Telluride, from DORMAN, AJUSA, FEL-PRO and 1 other brand. DORMAN 095147 carries the "Popular" badge.

Part numbers include DORMAN 095147, AJUSA 22007100 and DORMAN 995147CD, among others listed above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2021 Kia Telluride come from 4 brands — CALORSTAT, GATES, MOTORAD and 1 other brand.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

11 Oil Filter parts for the 2021 Kia Telluride come from 10 brands — WIX, PRO-TEC, CHAMP / LUBER-FINER and 7 other brands. The "Popular" part is PRO-TEC PXL10033.

The Economy section lists 4 options from PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand — the catalog's value-priced group. PRO-TEC PXL10033 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX WL10033XP is listed in this group.

In the Standard Replacement grade, WIX, BECK/ARNLEY, HASTINGS / BALDWIN and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is WIX WL10033.

This table covers the Oil Filter adapters. Read more

One part is listed for the 2021 Kia Telluride — DORMAN 926611.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2021 Kia Telluride — MAHLE / CLEVITE B33331.

This table covers the Oil Filter covers. Read more

3 Oil Filter Cover parts are listed for the 2021 Kia Telluride, from AUTOTECNICA, DORMAN and MOTORAD.

This group includes AUTOTECNICA KI1422870, DORMAN 917492 and MOTORAD MO365.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts are listed for the 2021 Kia Telluride, from AUTOTECNICA and SKP.

Part numbers include AUTOTECNICA KI1422800PRM, AUTOTECNICA KI1422800 and SKP SK117263AL.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2021 Kia Telluride, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES C557, MELLING 1103 and S.A. GEAR C1239.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2021 Kia Telluride come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES 96259, MELLING BT7081 and S.A. GEAR 91421.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2021 Kia Telluride — MELLING S1327.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2021 Kia Telluride, from CLOYES, MELLING and S.A. GEAR.

Part numbers include CLOYES C555, MELLING 1098 and S.A. GEAR C1197.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2021 Kia Telluride come from 3 brands — MELLING, S.A. GEAR and CLOYES.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76461S is listed in this group.

Standard Replacement: 3 parts, from MELLING and CLOYES. A representative part number is CLOYES 90555SFX.

This group includes S.A. GEAR 76461S, CLOYES 90555SFX and MELLING 31098SX and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts are listed for the 2021 Kia Telluride, from S.A. GEAR, CLOYES, HYUNDAI and 1 other brand. S.A. GEAR 71283 carries the "Popular" badge.

Part numbers include S.A. GEAR 71283, S.A. GEAR 71282 and CLOYES 96253, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2021 Kia Telluride come from 6 brands — HYUNDAI, S.A. GEAR, CLOYES and 3 other brands. The "Popular" part is HYUNDAI 244103CGA3.

This group includes HYUNDAI 244103CGA3, S.A. GEAR 91378 and CLOYES 96252 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5274.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2021 Kia Telluride come from 2 brands — MELLING and HYUNDAI.

Listed part numbers: HYUNDAI 231213L100, MELLING S1328 and MELLING S1329, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2021 Kia Telluride, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10024, DEA / MARMON RIDE CONTROL A71094 and PIONEER 630024, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2021 Kia Telluride come from 3 brands — AJUSA, BECK/ARNLEY and MAHLE / CLEVITE. The "Popular" part is MAHLE / CLEVITE VS50879.

This group includes MAHLE / CLEVITE VS50879, AJUSA 11156100 and AJUSA 11156200 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

3 Valve Guide parts for the 2021 Kia Telluride come from 3 brands — QUALCAST, SBI and TOPLINE.

Part numbers include QUALCAST 303152, SBI 1403152 and TOPLINE VGHY14.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: HYUNDAI 222263CCC0.

This table covers the Valve seats. Read more

3 Valve Seat parts are listed for the 2021 Kia Telluride, from SBI and QUALCAST.

Part numbers include QUALCAST 21150056, SBI SB131259 and SBI SB150056.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

4 Valve Spring Retainer Keeper parts are listed for the 2021 Kia Telluride, from HYUNDAI, MELLING, QUALCAST and 1 other brand.

This group includes HYUNDAI 2222302500, MELLING VL1060 and QUALCAST 345008 and the remaining parts above.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts for the 2021 Kia Telluride come from 6 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 3 other brands. The "Popular" part is AJUSA 12025500.

Listed part numbers: AJUSA 12025500, FEL-PRO SS72298 and AJUSA 57062800, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

18 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2021 Kia Telluride come from 8 brands — GATES, HYUNDAI, STANDARD MOTOR PRODUCTS and 5 other brands. The "Popular" part is DORMAN 918032.

The Economy section: 8 options from GATES, DORMAN, HOLSTEIN and 1 other brand. DORMAN 918032 is listed in this group.

Standard Replacement: 10 parts, from HYUNDAI, STANDARD MOTOR PRODUCTS, ACKOJA and 1 other brand. A representative part number is HYUNDAI 243783L100.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

7 Variable Valve Timing (VVT) Sprocket parts for the 2021 Kia Telluride come from 6 brands — HYUNDAI, SKP, AUTOTECNICA and 3 other brands. The "Popular" part is SKP SK998015.

The Economy section: 2 options from SKP and AUTOTECNICA. SKP SK998015 is listed in this group.

Standard Replacement: 5 parts, from HYUNDAI, STANDARD MOTOR PRODUCTS, ACKOJA and 1 other brand. A representative part number is STANDARD MOTOR PRODUCTS VVT709.

Part numbers include SKP SK998015, AUTOTECNICA HY1421805 and STANDARD MOTOR PRODUCTS VVT709, among others listed above.