2025 Kia Telluride Engine Parts

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Kia Telluride — ELRING 204940.

This table covers the Engine covers. Read more

One part is listed for the 2025 Kia Telluride — VARIOUS MFR KI1228176.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V3287.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2025 Kia Telluride — DAYCO PB1528N.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V3286.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

45 Oil parts for the 2025 Kia Telluride come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2025 Kia Telluride come from 2 brands — DORMAN and REIN.

Listed part numbers: DORMAN 090033, DORMAN 090053 and REIN HWU0110.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2025 Kia Telluride come from 3 brands — CALORSTAT, GATES and MOTORAD.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

8 Oil Filter parts for the 2025 Kia Telluride come from 7 brands — WIX, PRO-TEC, CHAMP / LUBER-FINER and 4 other brands. The "Popular" part is PRO-TEC PXL10033.

The Economy section lists 4 options from PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand — the catalog's value-priced group. PRO-TEC PXL10033 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C156A is listed in this group.

In the Standard Replacement grade, WIX and HASTINGS / BALDWIN supply 2 parts: built to original-equipment specification. A representative part number is WIX WL10033.

This group includes PRO-TEC PXL10033, CHAMP / LUBER-FINER P1026 and FVP G0033 and the remaining parts above.

This table covers the Oil Filter covers. Read more

One part is listed for the 2025 Kia Telluride — MOTORAD MO365.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts are listed for the 2025 Kia Telluride, from AUTOTECNICA and SKP.

This group includes AUTOTECNICA KI1422800PRM, AUTOTECNICA KI1422800 and SKP SK117263AL.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2025 Kia Telluride — MELLING 1103.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: MELLING BT7081.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2025 Kia Telluride — MELLING S1327.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2025 Kia Telluride — MELLING 1098.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: MELLING 31098SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

MELLING supplies the 3 Timing Chain Guide / Damper parts for the 2025 Kia Telluride.

Part numbers include MELLING BG7059, MELLING BG7066 and MELLING BT7069.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2025 Kia Telluride come from 2 brands — INA and MELLING.

Part numbers include INA ZT0685 and MELLING BT7070.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts for the 2025 Kia Telluride come from MELLING.

This group includes MELLING S1328, MELLING S1329 and MELLING S1295.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2025 Kia Telluride come from BECK/ARNLEY.

Listed part numbers: BECK/ARNLEY 0362108 and BECK/ARNLEY 0362109.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 Kia Telluride come from 2 brands — WELLS and HYUNDAI. The "Popular" part is HYUNDAI 243603CAA2.

The Economy section: 3 options from WELLS. WELLS 2T1216 is listed in this group.

Standard Replacement: 3 parts, from HYUNDAI. A representative part number is HYUNDAI 243603CAA2.

This group includes HYUNDAI 243603CAA2, WELLS 2T1216 and WELLS 2T1215 and the remaining parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

3 Variable Valve Timing (VVT) Sprocket parts for the 2025 Kia Telluride come from 2 brands — HYUNDAI and AUTOTECNICA.

The Economy section: 1 option from AUTOTECNICA. AUTOTECNICA HY1421805 is listed in this group.

Standard Replacement: 2 parts, from HYUNDAI. A representative part number is HYUNDAI 243503L100.

Listed part numbers: AUTOTECNICA HY1421805, HYUNDAI 243503L100 and HYUNDAI 243703CGA0.