2024 Kia Telluride Engine Parts

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2024 Kia Telluride come from 2 brands — ELRING and FEL-PRO.

Listed part numbers: ELRING 204920, ELRING 204940 and FEL-PRO 26864PT, plus the other parts above.

This table covers the Engine covers. Read more

This group shows a single part: VARIOUS MFR KI1228176.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2024 Kia Telluride, from MELLING and SBI.

This group includes MELLING V3287 and SBI 13287.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 2024 Kia Telluride come from 3 brands — ATP, DAYCO and PIONEER.

This group includes ATP 102222, DAYCO PB1528N and PIONEER DA204.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 2024 Kia Telluride come from MAHLE / CLEVITE.

This group includes MAHLE / CLEVITE MS20318, MAHLE / CLEVITE MS20317 and MAHLE / CLEVITE MS20649.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2024 Kia Telluride, from MELLING and SBI.

Listed part numbers: MELLING V3286 and SBI 13286.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2024 Kia Telluride — DEA / MARMON RIDE CONTROL A71108.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

45 Oil parts are listed for the 2024 Kia Telluride, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2024 Kia Telluride, from DORMAN, REIN and SKP.

Part numbers include DORMAN 090033, DORMAN 090053 and REIN HWU0110, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2024 Kia Telluride come from DORMAN.

This group includes DORMAN 095147 and DORMAN 995147CD.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2024 Kia Telluride, from CALORSTAT, GATES and MOTORAD.

This group includes CALORSTAT OC2331, GATES 31083 and MOTORAD MO151.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

10 Oil Filter parts are listed for the 2024 Kia Telluride, from WIX, PRO-TEC, CHAMP / LUBER-FINER and 6 other brands. PRO-TEC PXL10033 carries the "Popular" badge.

In the Economy grade, PRO-TEC, CHAMP / LUBER-FINER, FVP and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL10033.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C156A.

The Standard Replacement section lists 4 options from WIX, BECK/ARNLEY, HASTINGS / BALDWIN and 1 other brand — built to original-equipment specification. WIX WL10033 is listed in this group.

This table covers the Oil Filter adapters. Read more

This group shows a single part: DORMAN 926611.

This table covers the Oil Filter covers. Read more

2 Oil Filter Cover parts for the 2024 Kia Telluride come from 2 brands — DORMAN and MOTORAD.

This group includes DORMAN 917492 and MOTORAD MO365.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts for the 2024 Kia Telluride come from 2 brands — AUTOTECNICA and SKP.

Listed part numbers: AUTOTECNICA KI1422800PRM, AUTOTECNICA KI1422800 and SKP SK117263AL.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts for the 2024 Kia Telluride come from 2 brands — CLOYES and MELLING.

This group includes CLOYES C557 and MELLING 1103.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts are listed for the 2024 Kia Telluride, from CLOYES and MELLING.

Part numbers include CLOYES 96259 and MELLING BT7081.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: MELLING S1327.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2024 Kia Telluride come from 2 brands — CLOYES and MELLING.

Listed part numbers: CLOYES C555 and MELLING 1098.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2024 Kia Telluride, from MELLING and CLOYES.

Listed part numbers: CLOYES 90555SFX, MELLING 31098SX and MELLING 31098S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts for the 2024 Kia Telluride come from 3 brands — CLOYES, HYUNDAI and PREFERRED COMPONENTS INC. The "Popular" part is CLOYES 96253.

Part numbers include CLOYES 96253, CLOYES 96255 and CLOYES 96256, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts are listed for the 2024 Kia Telluride, from HYUNDAI, CLOYES, INA and 2 other brands. HYUNDAI 244103CGA3 carries the "Popular" badge.

This group includes HYUNDAI 244103CGA3, CLOYES 96252 and INA ZT0685 and the remaining parts above.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts are listed for the 2024 Kia Telluride, from MELLING and HYUNDAI.

Listed part numbers: HYUNDAI 231213L100, MELLING S1328 and MELLING S1329, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

BECK/ARNLEY supplies both parts for the 2024 Kia Telluride.

Part numbers include BECK/ARNLEY 0362108 and BECK/ARNLEY 0362109.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

One part is listed for the 2024 Kia Telluride — SBI 1403152.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2024 Kia Telluride — HYUNDAI 222263CCC0.

This table covers the Valve seats. Read more

This group shows a single part: SBI SB131259.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2024 Kia Telluride come from 2 brands — MELLING and SBI.

Listed part numbers: MELLING VL1060 and SBI 1211060.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 Kia Telluride — SBI 1221444.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

9 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 Kia Telluride, from HYUNDAI, HOLSTEIN, CLOYES and 2 other brands. HYUNDAI 243603CAA2 carries the "Popular" badge.

Economy: 3 parts, from HOLSTEIN and WELLS. A representative part number is HOLSTEIN 2VTS0330.

The Standard Replacement section: 6 options from HYUNDAI, CLOYES and STANDARD MOTOR PRODUCTS. HYUNDAI 243603CAA2 is listed in this group.

Part numbers include HYUNDAI 243603CAA2, HOLSTEIN 2VTS0330 and HOLSTEIN 2VTS0323, among others listed above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

4 Variable Valve Timing (VVT) Sprocket parts are listed for the 2024 Kia Telluride, from HYUNDAI, AUTOTECNICA and PREFERRED COMPONENTS INC.

Economy: 1 part, from AUTOTECNICA. A representative part number is AUTOTECNICA HY1421805.

The Standard Replacement section: 3 options from HYUNDAI and PREFERRED COMPONENTS INC. HYUNDAI 243503L100 is listed in this group.

Listed part numbers: AUTOTECNICA HY1421805, HYUNDAI 243503L100 and HYUNDAI 243703CGA0, plus the other parts above.