2016 Mitsubishi Lancer Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Mitsubishi Lancer — ELRING 127610.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2016 Mitsubishi Lancer come from 2 brands — KING ENGINE BEARINGS and TOPLINE.

Part numbers include KING ENGINE BEARINGS CR4586SX and TOPLINE RBHY11.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2016 Mitsubishi Lancer come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 54213000, APEX ACS11070 and FEL-PRO CS26449 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2016 Mitsubishi Lancer, from KING ENGINE BEARINGS and TOPLINE. TOPLINE TWHY11 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 3 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB5722XPCX.

The Standard Replacement section lists 3 options from TOPLINE and KING ENGINE BEARINGS — built to original-equipment specification. TOPLINE TWHY11 is listed in this group.

Listed part numbers: TOPLINE TWHY11, KING ENGINE BEARINGS MB5722XPCX and KING ENGINE BEARINGS MB5722XP, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2016 Mitsubishi Lancer, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Crankshaft Seal parts are listed for the 2016 Mitsubishi Lancer, from FEL-PRO, AJUSA, APEX and 7 other brands. BCA NS224200 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts for the 2016 Mitsubishi Lancer come from 7 brands — AJUSA, FEL-PRO, APEX and 4 other brands. The "Popular" part is AJUSA 81041900.

This group includes AJUSA 81041900, FEL-PRO ES72472 and APEX AHB1191 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2016 Mitsubishi Lancer come from 5 brands — FEL-PRO, ULTRA-POWER, VICTOR REINZ and 2 other brands. The "Popular" part is FEL-PRO 26557PT.

Listed part numbers: FEL-PRO 26557PT and APEX AHG1191, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts for the 2016 Mitsubishi Lancer come from 6 brands — APEX, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is APEX AHS13013.

Listed part numbers: APEX AHS13013, FEL-PRO HS26449PT and AJUSA 52484000, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2016 Mitsubishi Lancer.

Listed part numbers: KAT'S HEATERS 11812 and KAT'S HEATERS 28812.

This table covers the Engine covers. Read more

5 Engine Cover parts for the 2016 Mitsubishi Lancer come from TECHPRO. The "Popular" part is TECHPRO MI1228115.

This group includes TECHPRO MI1228115, TECHPRO MI1228116 and TECHPRO MI1228142 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2016 Mitsubishi Lancer come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 50436200 and TOPLINE CGSMI37.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts are listed for the 2016 Mitsubishi Lancer, from ITM ENGINE COMPONENTS, QUALCAST, SBI and 1 other brand.

This group includes ITM ENGINE COMPONENTS RX9973, QUALCAST 1013191 and SBI 13256 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 2016 Mitsubishi Lancer come from 3 brands — ATP, DAYCO and DORMAN.

Part numbers include ATP 102480, DAYCO PB1772N and DORMAN 594757.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 2016 Mitsubishi Lancer come from 5 brands — VICTOR REINZ, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AMS11700.

Part numbers include APEX AMS11700, FEL-PRO MS97114 and ELRING 926420, among others listed above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2016 Mitsubishi Lancer — ELRING 459480.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Intake Valve parts are listed for the 2016 Mitsubishi Lancer, from ITM ENGINE COMPONENTS, QUALCAST, SBI and 1 other brand.

Part numbers include ITM ENGINE COMPONENTS RV9973, QUALCAST 1013190 and SBI 13255, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

16 Motor Mount parts are listed for the 2016 Mitsubishi Lancer, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 4 other brands. SKP SKM3131 carries the "Popular" badge.

In the Economy grade, SKP and AUTO EXTRA supply 2 parts: the catalog's value-priced group. A representative part number is SKP SKM3131.

The Standard Replacement section: 14 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 3130 is listed in this group.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2016 Mitsubishi Lancer.

Part numbers include ANCHOR 300924 and ANCHOR 300923.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

59 Oil parts are listed for the 2016 Mitsubishi Lancer, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 20438 carries the "Popular" badge. Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 42 parts.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2016 Mitsubishi Lancer, from DORMAN, ELRING and AGS. AGS ODP00007 carries the "Popular" badge.

Part numbers include AGS ODP00007, DORMAN 090053 and DORMAN 090075, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2016 Mitsubishi Lancer come from 5 brands — DORMAN, AJUSA, APEX and 2 other brands. The "Popular" part is DORMAN 095141.

This group includes DORMAN 095141, AJUSA 18001100 and APEX ADP1906 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2016 Mitsubishi Lancer, from CALORSTAT, GATES and TECHPRO.

This group includes CALORSTAT OC2333, GATES 31118 and TECHPRO 87AM009.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2016 Mitsubishi Lancer, from BOSCH, VARIOUS MFR, WIX and 11 other brands. MOBIL M1110A carries the "Popular" badge.

Economy: 5 parts, from BOSCH, FVP, PRO-TEC and 2 other brands. A representative part number is BOSCH 72226WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.

The Standard Replacement section: 10 options from BOSCH, WIX, ACKOJA and 7 other brands. BOSCH 3323 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2016 Mitsubishi Lancer come from 3 brands — DORMAN, SKP and SPECTRA PREMIUM.

Part numbers include DORMAN 264589, DORMAN 264312 and SKP SK264589, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2016 Mitsubishi Lancer, from FEL-PRO, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO OS30824 carries the "Popular" badge.

Part numbers include FEL-PRO OS30824, APEX AOP1170 and MAHLE / CLEVITE OS32424, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2016 Mitsubishi Lancer, from SKP, MELLING and TOPLINE.

Economy: 1 part, from SKP. A representative part number is SKP SKM509.

The Standard Replacement section: 2 options from MELLING and TOPLINE. MELLING M509 is listed in this group.

This group includes SKP SKM509, MELLING M509 and TOPLINE OPMI37.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: INA ZC76335P.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: TOPLINE PAMI37.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: TOPLINE RSCHR1.

This table covers the Thrust washers. Read more

One part is listed for the 2016 Mitsubishi Lancer — KING ENGINE BEARINGS TW1050AM.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts for the 2016 Mitsubishi Lancer come from 3 brands — CLOYES, FVP and MELLING.

Part numbers include CLOYES C900 and MELLING 900C, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

One part is listed for the 2016 Mitsubishi Lancer — INA ZC76335T.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts for the 2016 Mitsubishi Lancer come from 3 brands — MELLING, CLOYES and FVP. The "Popular" part is MELLING BG5558.

Part numbers include MELLING BG5558, MELLING BT5557 and CLOYES 95558, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts are listed for the 2016 Mitsubishi Lancer, from CLOYES, FVP and MELLING.

Listed part numbers: CLOYES 95559 and MELLING BT5559, plus the other parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Mitsubishi Lancer — MAHLE / CLEVITE 68033.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

7 Valve Cover Gasket parts are listed for the 2016 Mitsubishi Lancer, from APEX, FEL-PRO, AJUSA and 4 other brands. APEX AVC1170 carries the "Popular" badge.

Part numbers include APEX AVC1170, FEL-PRO VS50765R and AJUSA 11117300, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts are listed for the 2016 Mitsubishi Lancer, from ENGINETECH, QUALCAST, SBI and 1 other brand.

Part numbers include ENGINETECH GD1797BR, QUALCAST 303154 and SBI 1403154, among others listed above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2016 Mitsubishi Lancer come from 2 brands — QUALCAST and SBI.

Part numbers include QUALCAST 345008 and SBI 1211060.