2016 Mitsubishi Lancer Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

2 Clutch Plate Pack parts for the 2016 Mitsubishi Lancer come from RAYBESTOS POWERTRAIN.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN FRMMITSU16.

The Steel Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMMITSU16 is listed in this group.

This group includes RAYBESTOS POWERTRAIN FRMMITSU16 and RAYBESTOS POWERTRAIN STMMITSU16.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

6 Filter parts for the 2016 Mitsubishi Lancer come from 6 brands — VARIOUS MFR, ELRING, VAICO and 3 other brands. The "Popular" part is VARIOUS MFR PT99754.

The Economy section lists 2 options from VARIOUS MFR and ELRING — the catalog's value-priced group. VARIOUS MFR PT99754 is listed in this group.

In the Standard Replacement grade, VAICO, RAYBESTOS POWERTRAIN and WIX supply 3 parts: built to original-equipment specification. A representative part number is VAICO V330046.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include VARIOUS MFR PT99754, ELRING 203510 and VAICO V330046, among others listed above.

This table covers the heat exchangers that cool transmission fluid. Typical signs include fluid that overheats, a leak at the cooler fittings, or milky fluid that says coolant and ATF have mixed. Flush the lines when you replace a cooler. Cross-contamination is how a small leak becomes a transmission job. Read more

2 Fluid Cooler parts for the 2016 Mitsubishi Lancer come from 2 brands — GPD and SKP.

This group includes GPD 2611398 and SKP SK117115.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE W33638.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2016 Mitsubishi Lancer, from BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts for the 2016 Mitsubishi Lancer come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS710633, BCA NS710632 and NATIONAL 710633, plus the other parts above.

This table covers the rebuild kits for this assembly. Read more

One part is listed for the 2016 Mitsubishi Lancer — TRANSTEC 81000629.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2016 Mitsubishi Lancer — SCHAEFFLER SS2111.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts are listed for the 2016 Mitsubishi Lancer, from NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 710923 and WJB / INMOTION PARTS WS710923.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

12 Transmission Fluid parts for the 2016 Mitsubishi Lancer come from 6 brands — VALVOLINE, LIQUI MOLY, AISIN and 3 other brands. The "Popular" part is AISIN ATFNS2.

In the CVT grade, VALVOLINE, AISIN, LUBEGARD and 1 other brand supply 6 parts: grouped under the catalog's "CVT" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFNS2.

The Multi-Vehicle section lists 5 options from VALVOLINE and LIQUI MOLY — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The ZF Fluid section lists 1 option from ZF — grouped under the catalog's "ZF Fluid" designation — the notes column spells out what sets them apart. ZF 5961308626 is listed in this group.

This table covers the conditioners and additives used with this transmission fluid. Read more

This group shows a single part: LUBEGARD 67010.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Transmission Mount parts are listed for the 2016 Mitsubishi Lancer, from ANCHOR, PIONEER and WESTAR.

This group includes ANCHOR 3134, PIONEER 625418 and WESTAR EM3134.