2011 Nissan Frontier Engine Parts

This table covers the chains that drive the balance shafts. Read more

11 Balance Shaft Chain parts for the 2011 Nissan Frontier come from 6 brands — MELLING, S.A. GEAR, INA and 3 other brands. The "Popular" part is CLOYES C902.

In the Chain Only grade, S.A. GEAR, CLOYES, MELLING and 2 other brands supply 7 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is CLOYES C902.

The Kit section lists 4 options from MELLING, ENGINETECH and INA — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. ENGINETECH TS765 is listed in this group.

This table covers the guides that keep the balance-shaft chain on its path. Read more

2 Balance Shaft Chain Guide parts for the 2011 Nissan Frontier come from 2 brands — INA and PREFERRED COMPONENTS INC.

This group includes INA ZG95616 and PREFERRED COMPONENTS INC R76000.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Balance Shaft Chain Tensioner parts are listed for the 2011 Nissan Frontier, from MELLING, CLOYES, INA and 2 other brands. MELLING BT7013 carries the "Popular" badge.

Part numbers include MELLING BT7013, CLOYES 95606 and INA ZT95606, among others listed above.

This table covers the Balance Shaft sprockets. Read more

3 Balance Shaft Sprocket parts for the 2011 Nissan Frontier come from 3 brands — INA, MELLING and S.A. GEAR.

Listed part numbers: INA ZSS945, MELLING S945 and S.A. GEAR S1304.

This table covers the connecting rods between each piston and the crankshaft. Read more

2 Connecting Rod parts for the 2011 Nissan Frontier come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH ECR117 and TOPLINE CRD42.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

13 Connecting Rod Bearing parts for the 2011 Nissan Frontier come from 6 brands — KING ENGINE BEARINGS, ENGINETECH, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ENGINETECH BB1005.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4065XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4065AM.

11 further parts sit outside the graded sections, with the same engine-level match.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Conversion / Lower Gasket Set parts for the 2011 Nissan Frontier come from 8 brands — AJUSA, ENGINETECH, FEL-PRO and 5 other brands. The "Popular" part is ENGINETECH NI25CSB.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts for the 2011 Nissan Frontier come from ENGINETECH.

This group includes ENGINETECH 835100 and ENGINETECH 838500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

16 Crankshaft Main Bearing parts are listed for the 2011 Nissan Frontier, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 3 other brands. ENGINETECH BC1004 carries the "Popular" badge.

High Performance: 1 part, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5595XP.

The Standard Replacement section: 2 options from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5245AM is listed in this group.

13 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2011 Nissan Frontier, from NATIONAL, SCHAEFFLER, WJB / INMOTION PARTS and 1 other brand.

Part numbers include BCA NS99189, NATIONAL 99181 and NATIONAL 99189, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

31 Crankshaft Seal parts are listed for the 2011 Nissan Frontier, from AJUSA, SCHAEFFLER, NATIONAL and 11 other brands. AJUSA 15045100 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.

This table covers the bolts that clamp the cylinder head to the block. Read more

18 Cylinder Head Bolt parts for the 2011 Nissan Frontier come from 10 brands — AJUSA, APEX, MAHLE / CLEVITE and 7 other brands. The "Popular" part is AJUSA 81047800.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

31 Cylinder Head Gasket parts for the 2011 Nissan Frontier come from 10 brands — AJUSA, ENGINETECH, VICTOR REINZ and 7 other brands. The "Popular" part is APEX AHG555L. A list this long means Cylinder Head Gasket applications vary by configuration — the notes carry the qualifiers.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

21 Cylinder Head Gasket Set parts for the 2011 Nissan Frontier come from 10 brands — FEL-PRO, AJUSA, ELRING and 7 other brands. The "Popular" part is APEX AHS5059.

This table covers the Cylinder Head Spacer shims. Read more

This group shows a single part: SBI 2302139.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies the 3 Engine Block Heater parts for the 2011 Nissan Frontier.

Listed part numbers: KAT'S HEATERS 28400, KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO NI1228172.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

12 Engine Kit Gasket Set parts for the 2011 Nissan Frontier come from 6 brands — AJUSA, ELRING, ENGINETECH and 3 other brands. The "Popular" part is ENGINETECH NI40K1.

This table covers the Engine rebuild kits. Read more

This group shows a single part: ENGINETECH RCNI40P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Exhaust Valve parts are listed for the 2011 Nissan Frontier, from SBI, ENGINETECH, TOPLINE and 4 other brands. SBI 13238 carries the "Popular" badge.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

7 Harmonic Balancer parts for the 2011 Nissan Frontier come from 4 brands — ATP, DAYCO, DORMAN and 1 other brand.

Part numbers include ATP 102285, ATP 102414 and DAYCO PB1576N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

19 Intake Manifold Gasket parts for the 2011 Nissan Frontier come from 9 brands — AJUSA, ELRING, VICTOR REINZ and 6 other brands. The "Popular" part is FEL-PRO MS97149.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

4 Intake Manifold Runner Control Valve / Solenoid parts for the 2011 Nissan Frontier come from 4 brands — DORMAN, STANDARD MOTOR PRODUCTS, ULTRA-POWER and 1 other brand.

Listed part numbers: DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts are listed for the 2011 Nissan Frontier, from AJUSA, FEL-PRO, APEX and 2 other brands. FEL-PRO MS96943 carries the "Popular" badge.

Part numbers include FEL-PRO MS96943, AJUSA 01291400 and AJUSA 01149900, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

10 Intake Valve parts are listed for the 2011 Nissan Frontier, from SBI, ENGINETECH, MAHLE / CLEVITE and 3 other brands. MELLING V3077 carries the "Popular" badge.