The 2013 Nissan NP300 has 134 engine parts with verified fitment on this page — 36 part types and 30 brands, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.
The engine on the 2013 Nissan NP300 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (14 parts), Crankshaft Seal (9 parts) and Motor Mount (9 parts). The other 33 part types cover the remaining 102 parts.
The 2013 Nissan NP300 was sold with both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. 10 parts fit every engine; the other 124 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2013 Nissan NP300 engine parts are ELRING (40 parts), AJUSA (22 parts) and CLOYES (11 parts), plus 27 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
10 parts on this 2013 Nissan NP300 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including AJUSA 15060100 (Crankshaft Seal) and ELRING 715100 (Cylinder Head Gasket). Click any part number to see every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 93144800 | 🇲🇽 MX | Intake | View on Amazon |
This table covers the camshafts that open the valves.
This group shows a single part: AJUSA 93144800.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.5L L4 DIESEL Turbocharged | CR4500CA | 🇲🇽 MX | SetTrimetal | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: KING ENGINE BEARINGS CR4500CA.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 54206300 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 54183500 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903790 | 🇲🇽 MX | with Crankshaft Seal | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903780 | 🇲🇽 MX | with Crankshaft Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Conversion / Lower Gasket Set parts for the 2013 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Part numbers include AJUSA 54206300, AJUSA 54183500 and ELRING 903790, among others listed above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.5L L4 DIESEL Turbocharged | MB5429SI | 🇲🇽 MX | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2013 Nissan NP300 — KING ENGINE BEARINGS MB5429SI.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 2.5L L4 DIESEL Turbocharged | 15060100 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 023530 | 🇲🇽 MX | Height [MM]: 7Inner Diameter [mm]: 46 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 15045100 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 2.4L L4 | 15082000 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 902980 | 🇲🇽 MX | Height [MM]: 7Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903070 | 🇲🇽 MX | Inner Diameter [mm]: 50Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 587460 | 🇲🇽 MX | Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) | View on Amazon |
| SCHAEFFLER Fits: all 2013 NP300 engines | SS2845 | 🇲🇽 MX | Front2.29" O.D. X 0.28" Width | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 814127100 | 🇲🇽 MX | FrontReplaces OE Part Number(s) 13510-0Z400 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Crankshaft Seal parts are listed for the 2013 Nissan NP300, from ELRING, AJUSA, SCHAEFFLER and 1 other brand. AJUSA 15060100 carries the "Popular" badge. 1 part fits every engine; the other 8 are engine-specific.
Listed part numbers: AJUSA 15060100, ELRING 023530 and AJUSA 15045100, plus the other parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 81061600 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 81031400 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 577120 | 🇲🇽 MX | SetBolt Head-/Nut Design: Male Torx | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 331520 | 🇲🇽 MX | SetBolt Head/Nut Design: Hexagon Socket | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
4 Cylinder Head Bolt parts for the 2013 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Part numbers include AJUSA 81061600, AJUSA 81031400 and ELRING 577120, among others listed above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 715100 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,355 | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 549240 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,9 | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 549270 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,975 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 10091800 | 🇲🇽 MX | 90 Bore Diameter | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715130 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion To [MM]: 0,355 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715170 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,305 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715210 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,280 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715230 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,255 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715360 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,230 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549250 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,925 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549260 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,95 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549280 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,0 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549290 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,025 | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 615395500 | 🇲🇽 MX | Replaces OE Part Number(s) 11044-70F00 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Cylinder Head Gasket parts for the 2013 Nissan NP300 come from 3 brands — ELRING, AJUSA and VICTOR REINZ. The "Popular" part is ELRING 715100.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 372550 | 🇲🇽 MX | with valve stem seals | View on Amazon |
| AJUSA Fits: 2.4L L4 | 52396000 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 53039600 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903770 | 🇲🇽 MX | with valve stem seals,without cylinder head gasketFor aluminium cylinder head cover | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 496050 | 🇲🇽 MX | without Cylinder Head Gasketwith valve stem seals | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 904650 | 🇲🇽 MX | with valve stem sealsDoes Not Include Cylinder Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Cylinder Head Gasket Set parts for the 2013 Nissan NP300 come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 372550.
Part numbers include ELRING 372550, AJUSA 52396000 and AJUSA 53039600, among others listed above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 50357500 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 51044300 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 383680 | 🇲🇽 MX | without cylinder head gasket,with valve stem seals,with crankshaft sealFor aluminium cylinder head cover | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts for the 2013 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 50357500, AJUSA 51044300 and ELRING 383680.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030113 | 🇲🇽 MX | 1.031 Head Diameter. 0.234 Stem | View on Amazon |
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030843 | 🇲🇽 MX | 1.023 Head DIA. 0.234 Stem. 4.155 OAL. | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
QUALCAST supplies both parts for the 2013 Nissan NP300.
Part numbers include QUALCAST 1030113 and QUALCAST 1030843.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: all 2013 NP300 engines | 102369 | 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2013 NP300 engines | 594435 | 🇲🇽 MX | View on Amazon | |
| PIONEER Fits: all 2013 NP300 engines | DA2369 | 🇲🇽 MX | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
3 Harmonic Balancer parts for the 2013 Nissan NP300 come from 3 brands — ATP, DORMAN and PIONEER. Every part fits both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged.
Listed part numbers: ATP 102369, DORMAN 594435 and PIONEER DA2369.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 13100700 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 13220800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 900230 | 🇲🇽 MX | Material: FW-522 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 517600 | 🇲🇽 MX | Material: Metaloseal | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts for the 2013 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 13100700, AJUSA 13220800 and ELRING 900230, plus the other parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030112 | 🇲🇽 MX | 1.110 Head DIA. 0.234 Stem | View on Amazon |
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030844 | 🇲🇽 MX | 1.125 Head DIA. 0.235 Stem. 4.172 OAL. | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
QUALCAST supplies both parts for the 2013 Nissan NP300.
Part numbers include QUALCAST 1030112 and QUALCAST 1030844.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 2.4L L4 | SKM8276 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| SKP Fits: 2.4L L4 | SKM2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 2.4L L4 | 2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4 | A2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| WESTAR Fits: 2.4L L4 | EM2718 | 🇲🇽 MX | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.5L L4 DIESEL Turbocharged | 9483 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 DIESEL Turbocharged | AM342 | 🇲🇽 MX | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 DIESEL Turbocharged | AM348 | 🇲🇽 MX | Front Left | View on Amazon |
| WESTAR Fits: 2.5L L4 DIESEL Turbocharged | EM9483 | 🇲🇽 MX | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
9 Motor Mount parts are listed for the 2013 Nissan NP300, from DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 1 other brand. ANCHOR 2718 carries the "Popular" badge.
In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SKM8276.
The Standard Replacement section lists 3 options from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR — built to original-equipment specification. ANCHOR 2718 is listed in this group.
4 ungrouped parts are not assigned to a grade, with the same engine-level match.
Listed part numbers: ANCHOR 2718, SKP SKM8276 and SKP SKM2718, plus the other parts above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.4L L4 | 301280 | 🇲🇽 MX | View on Amazon | |
| ANCHOR Fits: 2.5L L4 DIESEL Turbocharged | 300138 | 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
ANCHOR supplies both parts for the 2013 Nissan NP300.
Listed part numbers: ANCHOR 301280 and ANCHOR 300138.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 2.5L L4 DIESEL Turbocharged | A38600006 | 🇲🇽 MX | with OE No. 213055M301 | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
One part is listed for the 2013 Nissan NP300 — ACKOJA A38600006.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 2.5L L4 DIESEL Turbocharged | 238 | 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 2.5L L4 DIESEL Turbocharged | 153 | 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2013 Nissan NP300 come from HAYDEN.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Fits: all 2013 NP300 engines | ODP00011 | 🇲🇽 MX | M12x1.25 | View on Amazon |
| DORMAN Fits: all 2013 NP300 engines | 090038 | 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Fits: all 2013 NP300 engines | 090049 | 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 587290 | 🇲🇽 MX | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts are listed for the 2013 Nissan NP300, from DORMAN, AGS and ELRING. 3 parts fit every engine; the other 1 is engine-specific.
This group includes AGS ODP00011, DORMAN 090038 and DORMAN 090049 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 01140600 | 🇲🇽 MX | with Original Equipment (OE) # 11026-BX000 | View on Amazon |
| DORMAN Fits: all 2013 NP300 engines | 097134 | 🇲🇽 MX | SizeM10 | View on Amazon |
| DORMAN Fits: all 2013 NP300 engines | 997134CD | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 776327 | 🇲🇽 MX | Material: CopperOuter Diameter [MM]: 17,5 | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts for the 2013 Nissan NP300 come from 3 brands — DORMAN, AJUSA and ELRING. 2 parts fit every engine; the other 2 are engine-specific.
Part numbers include AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2013 NP300 engines | MO92 | 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
One part is listed for the 2013 Nissan NP300 — MOTORAD MO92.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 2.4L L4 | R7356 | 🇲🇽 MX | View on Amazon | |
| PRO-TEC Fits: 2.4L L4 | PXL57356 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.4L L4 | PG4612 | 🇲🇽 MX | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 2.4L L4 | 57356XP | 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 2.4L L4 | M1110A | 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 2.4L L4 | 57356 | 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 2.4L L4 | LF240 | 🇲🇽 MX | View on Amazon | |
| MANN Fits: 2.4L L4 | W6103 | 🇲🇽 MX | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| VARIOUS MFR Fits: 2.4L L4 | PG4612EX | 🇲🇽 MX | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
9 Oil Filter parts are listed for the 2013 Nissan NP300, from VARIOUS MFR, WIX, FVP and 4 other brands. WIX 57356XP carries the "Popular" badge.
Economy: 3 parts, from FVP, PRO-TEC and VARIOUS MFR. A representative part number is FVP R7356.
In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.
The Standard Replacement section: 4 options from WIX, HASTINGS / BALDWIN, MANN and 1 other brand. WIX 57356 is listed in this group.
Listed part numbers: WIX 57356XP, FVP R7356 and PRO-TEC PXL57356, plus the other parts above.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.4L L4 | 264528 | 🇲🇽 MX | RWD | View on Amazon |
| SKP Fits: 2.4L L4 | SK264528 | 🇲🇽 MX | Gasket Not Included | View on Amazon |
| SKP Fits: 2.5L L4 DIESEL Turbocharged | SK264055 | 🇲🇽 MX | Fits 4WDPICKUP | View on Amazon |
| SPECTRA PREMIUM Fits: 2.4L L4 | NSP33A | 🇲🇽 MX | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
4 Oil Pan parts for the 2013 Nissan NP300 come from 3 brands — SKP, DORMAN and SPECTRA PREMIUM.
This group includes DORMAN 264528, SKP SK264528 and SKP SK264055 and the remaining parts above.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 2.5L L4 DIESEL Turbocharged | 2D7531 | 🇲🇽 MX | Full Setfor 2 Ring Piston | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L L4 DIESEL Turbocharged | 2D7531S | 🇲🇽 MX | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
2 Piston Ring parts for the 2013 Nissan NP300 come from HASTINGS MANUFACTURING.
Part numbers include HASTINGS MANUFACTURING 2D7531 and HASTINGS MANUFACTURING 2D7531S.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 2.5L L4 DIESEL Turbocharged | TW716S | 🇲🇽 MX | Position: 3 | View on Amazon |
This table covers the Thrust washers.
One part is listed for the 2013 Nissan NP300 — MAHLE / CLEVITE TW716S.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S920T | 🇲🇽 MX | Engine Timing Camshaft Sprocket | View on Amazon |
| FVP Fits: 2.4L L4 | S920T | 🇲🇽 MX | View on Amazon |
This table covers the Timing Cam sprockets.
2 Timing Cam Sprocket parts are listed for the 2013 Nissan NP300, from CLOYES and FVP.
This group includes CLOYES S920T and the remaining parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 94211 | 🇲🇽 MX | Engine Timing Chain | View on Amazon |
| CLOYES Fits: 2.4L L4 | 94210 | 🇲🇽 MX | Engine Timing Chain | View on Amazon |
| FVP Fits: 2.4L L4 | 94210 | 🇲🇽 MX | Lower | View on Amazon |
| FVP Fits: 2.4L L4 | 94211 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
4 Timing Chain parts for the 2013 Nissan NP300 come from 2 brands — CLOYES and FVP.
Listed part numbers: CLOYES 94211 and CLOYES 94210, plus the other parts above.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 94180SAX | 🇲🇽 MX | Does Not Include SprocketsIncludes: Timing Chain (2), Timing Chain Tensioner (2), Timing Chain Guide, Timing Chain Tensioner Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 94180SA | 🇲🇽 MX | Includes: Timing Chain (2), Timing Chain Tensioner (2), Timing Chain Guide, Timing Chain Tensioner Guide, Crankshaft Sprocket, Camshaft Sprocket (2), Timing Idler Sprocket | View on Amazon |
| INA Fits: 2.4L L4 | ZC94180SA | 🇲🇽 MX | Includes 2 Camshaft Sprocket, 2 Chains, 1 Chain Deflector Sprocket, 1 Crank Sprocket, 1 Guide, 1 Tensioner Arm, 2 Tensioners | View on Amazon |
| INA Fits: 2.5L L4 DIESEL Turbocharged | ZC0117K | 🇲🇽 MX | Includes Chain Protect Additive | View on Amazon |
| MELLING Fits: 2.4L L4 | 34210SA | 🇲🇽 MX | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
5 Timing Chain & Component Kit parts are listed for the 2013 Nissan NP300, from CLOYES, INA and MELLING.
This group includes CLOYES 94180SAX, CLOYES 94180SA and INA ZC94180SA and the remaining parts above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95240 | 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95239 | 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| FVP Fits: 2.4L L4 | 95239 | 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| FVP Fits: 2.4L L4 | 95240 | 🇲🇽 MX | Left Lower | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
4 Timing Chain Guide / Damper parts for the 2013 Nissan NP300 come from 2 brands — CLOYES and FVP.
This group includes CLOYES 95240 and CLOYES 95239 and the remaining parts above.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95235 | 🇲🇽 MX | Lower | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95236 | 🇲🇽 MX | Upper | View on Amazon |
| FVP Fits: 2.4L L4 | 95235 | 🇲🇽 MX | Lower | View on Amazon |
| FVP Fits: 2.4L L4 | 95236 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
4 Timing Chain Tensioner parts are listed for the 2013 Nissan NP300, from CLOYES and FVP.
Part numbers include CLOYES 95235 and CLOYES 95236, among others listed above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 469280 | 🇲🇽 MX | 4WDCab & Chassis | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 902970 | 🇲🇽 MX | Housing Material: Cast Aluminium | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
ELRING supplies both parts for the 2013 Nissan NP300.
Listed part numbers: ELRING 469280 and ELRING 902970.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S699 | 🇲🇽 MX | Outer | View on Amazon |
| FVP Fits: 2.4L L4 | S699 | 🇲🇽 MX | Outer | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
2 Timing Crank Sprocket parts are listed for the 2013 Nissan NP300, from CLOYES and FVP.
Listed part numbers: CLOYES S699, plus the other parts above.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S909 | 🇲🇽 MX | Engine Timing Idler | View on Amazon |
| FVP Fits: 2.4L L4 | S909 | 🇲🇽 MX | View on Amazon |
This table covers the Timing Idler sprockets.
2 Timing Idler Sprocket parts for the 2013 Nissan NP300 come from 2 brands — CLOYES and FVP.
Listed part numbers: CLOYES S909, plus the other parts above.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | JTC11623 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 941850 | 🇲🇽 MX | 4WDCab & Chassis | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 964390 | 🇲🇽 MX | Exhaust Manifold4WD | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Turbocharger Gasket parts for the 2013 Nissan NP300 come from 2 brands — ELRING and AJUSA.
Listed part numbers: AJUSA JTC11623, ELRING 941850 and ELRING 964390.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 964490 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 964490.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 372490 | 🇲🇽 MX | Material: Polyacrylate Rubber (ACM) | View on Amazon |
| AJUSA Fits: 2.4L L4 | 56026200 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903030 | 🇲🇽 MX | for plastic cylinder head cover | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 372570 | 🇲🇽 MX | For aluminium cylinder head coverMaterial: Polyacrylate Rubber (ACM) | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 518620 | 🇲🇽 MX | 4WDCab & Chassis | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 547310 | 🇲🇽 MX | Material: Polyacrylate Rubber (ACM) | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 155313801 | 🇲🇽 MX | SetIncludes Spark Plug Tube Seals | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Valve Cover Gasket parts are listed for the 2013 Nissan NP300, from ELRING, AJUSA and VICTOR REINZ. ELRING 372490 carries the "Popular" badge.
This group includes ELRING 372490, AJUSA 56026200 and ELRING 903030 and the remaining parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 12008100 | 🇲🇽 MX | 6 x 10.7 x 11.5 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 57021600 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 12012100 | 🇲🇽 MX | 5 x 9.7 x 11.5 | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 57024800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 012410 | 🇲🇽 MX | Height [MM]: 11,1Inner Diameter [MM]: 9,8 | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Valve Stem Seal parts are listed for the 2013 Nissan NP300, from AJUSA and ELRING.
Listed part numbers: AJUSA 12008100, AJUSA 57021600 and AJUSA 12012100, plus the other parts above.
Buying Engine Parts for a 2013 Nissan NP300
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2013 Nissan NP300?
Our catalog currently lists 134 engine parts for the 2013 Nissan NP300 across 36 subcategories and 30 brands, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2013 Nissan NP300 engines?
Some do. 10 parts fit every engine; the other 124 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2013 Nissan NP300?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2013 Nissan NP300 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2013 Nissan NP300?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2013 Nissan NP300
Engine Parts for Other Nissan NP300 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.