2018 Nissan NP300 Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2018 Nissan NP300 — CLOYES C902.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts for the 2018 Nissan NP300 come from 2 brands — CLOYES and MELLING.

Listed part numbers: CLOYES 95606 and MELLING BT7013.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2018 Nissan NP300 — MELLING S945.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan NP300.

Part numbers include AJUSA 54270800 and AJUSA 54341700.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2018 Nissan NP300 come from 3 brands — AJUSA, SCHAEFFLER and VICTOR REINZ. The "Popular" part is AJUSA 15045100. 3 parts fit every engine; the other 4 are engine-specific.

Part numbers include AJUSA 15045100, AJUSA 15060100 and AJUSA 15053400, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2018 Nissan NP300 — AJUSA 81031400.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies the 6 Cylinder Head Gasket parts for the 2018 Nissan NP300.

Part numbers include AJUSA 10231200, AJUSA 10214200 and AJUSA 10214210, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan NP300.

Listed part numbers: AJUSA 52513900 and AJUSA 53109200.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan NP300.

Part numbers include AJUSA 50464000 and AJUSA 51113900.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 Nissan NP300.

This group includes AJUSA 13284900 and AJUSA 13258700.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 01388400.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts for the 2018 Nissan NP300 come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL. Every part fits both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged.

Part numbers include ANCHOR 9483 and DEA / MARMON RIDE CONTROL A4349.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2018 Nissan NP300 come from ANCHOR. Every part fits both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged.

Part numbers include ANCHOR 300138 and ANCHOR 300933.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

9 Oil parts for the 2018 Nissan NP300 come from VALVOLINE. The "Popular" part is VALVOLINE VV955. Every part fits both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged.

The Full Synthetic section lists 6 options from VALVOLINE — full-synthetic oils. VALVOLINE VV955 is listed in this group.

In the High Mileage (>75,000 Miles) grade, VALVOLINE supplies 3 parts: oils grouped for high-mileage engines. A representative part number is VALVOLINE VV179.

Part numbers include VALVOLINE VV955, VALVOLINE 891678 and VALVOLINE 904564, among others listed above.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2018 Nissan NP300 come from 2 brands — DORMAN and AGS. Every part fits both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged.

Part numbers include AGS ODP00011, DORMAN 090038 and DORMAN 090049.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2018 Nissan NP300, from DORMAN and AJUSA. All of them fit every engine offered in the 2018 NP300.

Part numbers include AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts for the 2018 Nissan NP300 come from 2 brands — GATES and MOTORAD. 1 part fits every engine; the other 1 is engine-specific.

This group includes GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 2018 Nissan NP300 come from 6 brands — VARIOUS MFR, MOBIL, MANN and 3 other brands. The "Popular" part is VARIOUS MFR PG4612. 6 parts fit every engine; the other 6 are engine-specific.

The Economy section lists 4 options from VARIOUS MFR and PRO-TEC — the catalog's value-priced group. VARIOUS MFR PG4612 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.

In the Standard Replacement grade, MANN, VARIOUS MFR, HASTINGS / BALDWIN and 1 other brand supply 6 parts: built to original-equipment specification. A representative part number is HASTINGS / BALDWIN LF113.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2018 Nissan NP300 — CLOYES S945.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2018 Nissan NP300.

Part numbers include HASTINGS MANUFACTURING 2D7531 and HASTINGS MANUFACTURING 2D7531S.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2018 Nissan NP300 — CLOYES C983.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC76322T.

This table covers the guides and dampers that keep the timing chain on its path. Read more

One part is listed for the 2018 Nissan NP300 — CLOYES 95502.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: INA ZT91220.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2018 Nissan NP300 come from 2 brands — CLOYES and MELLING.

Listed part numbers: CLOYES S907, plus the other parts above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Nissan NP300 — AJUSA JTC12101.

This table covers the Valve covers. Read more

One part is listed for the 2018 Nissan NP300 — DORMAN 263211.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2018 Nissan NP300 come from AJUSA.

Part numbers include AJUSA 11144400 and AJUSA 11135900.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 2018 Nissan NP300 come from AJUSA. Every part fits both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged.

Listed part numbers: AJUSA 12012100 and AJUSA 57024800.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Nissan NP300 come from 4 brands — STANDARD MOTOR PRODUCTS, DORMAN, GATES and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS VVT377. 4 parts fit every engine; the other 1 is engine-specific.

The Economy section: 3 options from DORMAN, GATES and ROSTRA. DORMAN 916767 is listed in this group.

Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS VVT377.

This group includes STANDARD MOTOR PRODUCTS VVT377, DORMAN 916767 and GATES VVS196 and the remaining parts above.