85 Engine parts are listed for the 2020 Nissan NP300, in 31 part types, covering both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2020 Nissan NP300, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Cylinder Head Gasket (11 parts), Oil Filter (7 parts) and Crankshaft Seal (6 parts). The other 28 part types cover the remaining 61 parts.
The 2020 Nissan NP300 was sold with both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. 13 parts fit every engine; the other 72 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2020 Nissan NP300 engine parts are AJUSA (24 parts), ELRING (22 parts) and DORMAN (7 parts), plus 13 more brands. Quality grades include Economy, Standard Replacement and High Performance / Heavy Duty.
5 parts on this 2020 Nissan NP300 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including AJUSA 15045100 (Crankshaft Seal) and ELRING 549240 (Cylinder Head Gasket). Click any part number to see every vehicle that part fits.
Balance Shaft Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | C902 | 🇲🇽 MX | View on Amazon |
This table covers the chains that drive the balance shafts.
This group shows a single part: CLOYES C902.
Balance Shaft Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | 95606 | 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.5L L4 | BT7013 | 🇲🇽 MX | View on Amazon |
This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
2 Balance Shaft Chain Tensioner parts are listed for the 2020 Nissan NP300, from CLOYES and MELLING.
This group includes CLOYES 95606 and MELLING BT7013.
Balance Shaft Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 2.5L L4 | S945 | 🇲🇽 MX | View on Amazon |
This table covers the Balance Shaft sprockets.
This group shows a single part: MELLING S945.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 54270800 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 54341700 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 384340 | 🇲🇽 MX | with Crankshaft Seal, Integrated Shaft Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts for the 2020 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Part numbers include AJUSA 54270800, AJUSA 54341700 and ELRING 384340.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 2.5L L4 | 15045100 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: all 2020 NP300 engines | 15060100 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 15053400 | 🇲🇽 MX | FrontCounter Clockwise | View on Amazon |
| ELRING Fits: 2.5L L4 | 902980 | 🇲🇽 MX | Height [MM]: 7Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 | 903070 | 🇲🇽 MX | Inner Diameter [mm]: 50Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 | 587460 | 🇲🇽 MX | Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Crankshaft Seal parts are listed for the 2020 Nissan NP300, from AJUSA and ELRING. AJUSA 15045100 carries the "Popular" badge. 1 part fits every engine; the other 5 are engine-specific.
This group includes AJUSA 15045100, AJUSA 15060100 and AJUSA 15053400 and the remaining parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 81031400 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 373320 | 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 2020 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 81031400 and ELRING 373320.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 | 549240 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,9 | View on Amazon |
| ELRING Popular Fits: 2.5L L4 | 549270 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,975 | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 10214200 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 10214210 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 10214220 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 10214230 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 10214240 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| ELRING Fits: 2.5L L4 | 549250 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,925 | View on Amazon |
| ELRING Fits: 2.5L L4 | 549260 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,95 | View on Amazon |
| ELRING Fits: 2.5L L4 | 549280 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,0 | View on Amazon |
| ELRING Fits: 2.5L L4 | 549290 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,025 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
11 Cylinder Head Gasket parts for the 2020 Nissan NP300 come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 549240.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 52513900 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 53109200 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts for the 2020 Nissan NP300 come from AJUSA.
Part numbers include AJUSA 52513900 and AJUSA 53109200.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 50464000 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 51113900 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 2020 Nissan NP300 come from AJUSA.
This group includes AJUSA 50464000 and AJUSA 51113900.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 13284900 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 13258700 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 517600 | 🇲🇽 MX | Material: Metaloseal | View on Amazon |
| ELRING Fits: 2.5L L4 | 941620 | 🇲🇽 MX | Material: FPM (Fluoride Rubber) | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Intake Manifold Gasket parts for the 2020 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 13284900, AJUSA 13258700 and ELRING 517600, plus the other parts above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 01388400 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 Nissan NP300 — AJUSA 01388400.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: all 2020 NP300 engines | 9483 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: all 2020 NP300 engines | A4349 | 🇲🇽 MX | Fits Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
2 Motor Mount parts are listed for the 2020 Nissan NP300, from ANCHOR and DEA / MARMON RIDE CONTROL. All of them fit every engine offered in the 2020 NP300.
Part numbers include ANCHOR 9483 and DEA / MARMON RIDE CONTROL A4349.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: all 2020 NP300 engines | 300138 | 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2020 Nissan NP300 — ANCHOR 300138.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 2.5L L4 | VV916 | 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 891682 | 🇲🇽 MX | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 904536 | 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 904538 | 🇲🇽 MX | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 2.5L L4 | 881150 | 🇲🇽 MX | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
VALVOLINE supplies the 5 Oil parts for the 2020 Nissan NP300. VALVOLINE VV916 carries the "Popular" badge.
Part numbers include VALVOLINE VV916, VALVOLINE 891682 and VALVOLINE 904536, among others listed above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Fits: all 2020 NP300 engines | ODP00011 | 🇲🇽 MX | M12x1.25 | View on Amazon |
| DORMAN Fits: all 2020 NP300 engines | 090038 | 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Fits: all 2020 NP300 engines | 090049 | 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| ELRING Fits: 2.5L L4 | 587290 | 🇲🇽 MX | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts are listed for the 2020 Nissan NP300, from DORMAN, AGS and ELRING. 3 parts fit every engine; the other 1 is engine-specific.
Listed part numbers: AGS ODP00011, DORMAN 090038 and DORMAN 090049, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2020 NP300 engines | 097134 | 🇲🇽 MX | SizeM10 | View on Amazon |
| AJUSA Fits: all 2020 NP300 engines | 01140600 | 🇲🇽 MX | with Original Equipment (OE) # 11026-BX000 | View on Amazon |
| DORMAN Fits: all 2020 NP300 engines | 997134CD | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 813052 | 🇲🇽 MX | Material: CopperShape: C-Shape | View on Amazon |
| ELRING Fits: 2.5L L4 | 776327 | 🇲🇽 MX | Material: CopperOuter Diameter [MM]: 17,5 | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Drain Plug Gasket parts for the 2020 Nissan NP300 come from 3 brands — DORMAN, ELRING and AJUSA. The "Popular" part is DORMAN 097134. 3 parts fit every engine; the other 2 are engine-specific.
Part numbers include DORMAN 097134, AJUSA 01140600 and DORMAN 997134CD, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2020 NP300 engines | MO107 | 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
One part is listed for the 2020 Nissan NP300 — MOTORAD MO107.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 2.5L L4 | PG4612 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.5L L4 | PO4612NS1 | 🇲🇽 MX | OE Style | View on Amazon |
| VARIOUS MFR Fits: 2.5L L4 DIESEL Turbocharged | PG4670 | 🇲🇽 MX | Spin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 2.5L L4 | M1110A | 🇲🇽 MX | Extended Performance | View on Amazon |
| MOBIL Fits: 2.5L L4 DIESEL Turbocharged | M1204A | 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 2.5L L4 | PG4612EX | 🇲🇽 MX | Extended Life | View on Amazon |
| VARIOUS MFR Fits: 2.5L L4 DIESEL Turbocharged | PG4670EX | 🇲🇽 MX | Extended LifeSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
7 Oil Filter parts are listed for the 2020 Nissan NP300, from VARIOUS MFR and MOBIL.
In the Economy grade, VARIOUS MFR supplies 3 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4612.
In the High Performance / Heavy Duty grade, MOBIL supplies 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1110A.
The Standard Replacement section lists 2 options from VARIOUS MFR — built to original-equipment specification. VARIOUS MFR PG4612EX is listed in this group.
Part numbers include VARIOUS MFR PG4612, VARIOUS MFR PO4612NS1 and VARIOUS MFR PG4670, among others listed above.
Oil Pump Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | S945 | 🇲🇽 MX | View on Amazon |
This table covers the Oil Pump sprockets.
This group shows a single part: CLOYES S945.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 2.5L L4 DIESEL Turbocharged | 2D7531 | 🇲🇽 MX | Full Setfor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
This group shows a single part: HASTINGS MANUFACTURING 2D7531.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | C983 | 🇲🇽 MX | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
This group shows a single part: CLOYES C983.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 2.5L L4 | ZC76322T | 🇲🇽 MX | Includes 1 Chain, 1 Crank Sprocket, 1 Tensioner Arm, 1 Guide, 1 TensionerDoes Not Include Cam Sprocket | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
One part is listed for the 2020 Nissan NP300 — INA ZC76322T.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | 95502 | 🇲🇽 MX | Guide | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
This group shows a single part: CLOYES 95502.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 | 469280 | 🇲🇽 MX | Base Model | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2020 Nissan NP300 — ELRING 469280.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.5L L4 | S907 | 🇲🇽 MX | View on Amazon | |
| MELLING Fits: 2.5L L4 | S907 | 🇲🇽 MX | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
2 Timing Crank Sprocket parts are listed for the 2020 Nissan NP300, from CLOYES and MELLING.
Listed part numbers: CLOYES S907, plus the other parts above.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | JTC12101 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING Fits: 2.5L L4 | 964390 | 🇲🇽 MX | Exhaust ManifoldBase Model | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Turbocharger Gasket parts for the 2020 Nissan NP300 come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA JTC12101 and ELRING 964390.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 | 964490 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 964490.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L L4 | 263211 | 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
This group shows a single part: DORMAN 263211.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 | 11144400 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 11135900 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 903030 | 🇲🇽 MX | for plastic cylinder head cover | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Valve Cover Gasket parts are listed for the 2020 Nissan NP300, from AJUSA and ELRING.
This group includes AJUSA 11144400, AJUSA 11135900 and ELRING 903030.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: all 2020 NP300 engines | 12012100 | 🇲🇽 MX | 5 x 9.7 x 11.5 | View on Amazon |
| AJUSA Fits: all 2020 NP300 engines | 57024800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 | 069630 | 🇲🇽 MX | Height [MM]: 9,5Material: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 | 012410 | 🇲🇽 MX | Height [MM]: 11,1Inner Diameter [MM]: 9,8 | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Valve Stem Seal parts are listed for the 2020 Nissan NP300, from AJUSA and ELRING. 2 parts fit every engine; the other 2 are engine-specific.
This group includes AJUSA 12012100, AJUSA 57024800 and ELRING 069630 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L L4 | 916767 | 🇲🇽 MX | Intake | View on Amazon |
| ROSTRA Fits: 2.5L L4 | 790132 | 🇲🇽 MX | Intake | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT142 | 🇲🇽 MX | Intake | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 2.5L L4 | VVT377 | 🇲🇽 MX | Exhaust | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.5L L4 DIESEL Turbocharged | 916767 | 🇲🇽 MX | Intake | View on Amazon |
| ROSTRA Fits: 2.5L L4 DIESEL Turbocharged | 790132 | 🇲🇽 MX | Intake | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
6 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2020 Nissan NP300, from DORMAN, ROSTRA and STANDARD MOTOR PRODUCTS.
Economy: 2 parts, from DORMAN and ROSTRA. A representative part number is DORMAN 916767.
The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS VVT142 is listed in this group.
2 ungrouped parts are not assigned to a grade, with the same engine-level match.
Listed part numbers: DORMAN 916767, ROSTRA 790132 and STANDARD MOTOR PRODUCTS VVT142, plus the other parts above.
Buying Engine Parts for a 2020 Nissan NP300
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2020 Nissan NP300?
Our catalog currently lists 85 engine parts for the 2020 Nissan NP300 across 31 subcategories and 16 brands, covering both the 2.5L L4 and the 2.5L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2020 Nissan NP300 engines?
Some do. 13 parts fit every engine; the other 72 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2020 Nissan NP300?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2020 Nissan NP300?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2020 Nissan NP300 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2020 Nissan NP300?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2020 Nissan NP300
Engine Parts for Other Nissan NP300 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.