133 Engine parts are listed for the 2014 Nissan NP300, in 35 part types, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2014 Nissan NP300 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (14 parts), Oil Filter (13 parts) and Crankshaft Seal (9 parts). The other 32 part types cover the remaining 97 parts.
The 2014 Nissan NP300 was sold with both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. 10 parts fit every engine; the other 123 are engine-specific. Each part shows which engine(s) it fits.
29 brands supply engine parts for the 2014 Nissan NP300, led by ELRING (34 parts), AJUSA (23 parts) and CLOYES (11 parts), plus 26 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2014 Nissan NP300. 10 parts have it, including AJUSA 15060100 (Crankshaft Seal) and ELRING 715100 (Cylinder Head Gasket). Each part number opens a page with every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 93144800 | 🇲🇽 MX | Intake | View on Amazon |
This table covers the camshafts that open the valves.
One part is listed for the 2014 Nissan NP300 — AJUSA 93144800.
Connecting Rod Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.5L L4 DIESEL Turbocharged | CR4500CA | 🇲🇽 MX | SetTrimetal | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
One part is listed for the 2014 Nissan NP300 — KING ENGINE BEARINGS CR4500CA.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 54206300 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 54183500 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903790 | 🇲🇽 MX | with Crankshaft Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Conversion / Lower Gasket Set parts are listed for the 2014 Nissan NP300, from AJUSA and ELRING.
Part numbers include AJUSA 54206300, AJUSA 54183500 and ELRING 903790.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 2.5L L4 DIESEL Turbocharged | MB5429SI | 🇲🇽 MX | SetBimetal (Aluminum Silicon Base) | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
This group shows a single part: KING ENGINE BEARINGS MB5429SI.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 2.5L L4 DIESEL Turbocharged | 15060100 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 023530 | 🇲🇽 MX | Height [MM]: 7Inner Diameter [mm]: 46 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 15045100 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 2.4L L4 | 15082000 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 902980 | 🇲🇽 MX | Height [MM]: 7Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903070 | 🇲🇽 MX | Inner Diameter [mm]: 50Material: FPM (Fluoride Rubber) | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 587460 | 🇲🇽 MX | Height [MM]: 8,5Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) | View on Amazon |
| SCHAEFFLER Fits: all 2014 NP300 engines | SS2845 | 🇲🇽 MX | Front2.29" O.D. X 0.28" Width | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 814127100 | 🇲🇽 MX | FrontReplaces OE Part Number(s) 13510-0Z400 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
9 Crankshaft Seal parts for the 2014 Nissan NP300 come from 4 brands — ELRING, AJUSA, SCHAEFFLER and 1 other brand. The "Popular" part is AJUSA 15060100. 1 part fits every engine; the other 8 are engine-specific.
This group includes AJUSA 15060100, ELRING 023530 and AJUSA 15045100 and the remaining parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 81061600 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 81031400 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 577120 | 🇲🇽 MX | SetBolt Head-/Nut Design: Male Torx | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 331520 | 🇲🇽 MX | SetBolt Head/Nut Design: Hexagon Socket | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
4 Cylinder Head Bolt parts are listed for the 2014 Nissan NP300, from AJUSA and ELRING.
This group includes AJUSA 81061600, AJUSA 81031400 and ELRING 577120 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 715100 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,355 | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 549240 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,9 | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 549270 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,975 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 10091800 | 🇲🇽 MX | 90 Bore Diameter | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715130 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion To [MM]: 0,355 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715170 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,305 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715210 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,280 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715230 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,255 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 715360 | 🇲🇽 MX | Diameter [MM]: 89Piston Protrusion From [MM]: 0,230 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549250 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,925 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549260 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 0,95 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549280 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,0 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 549290 | 🇲🇽 MX | Diameter [MM]: 89,5Installed Thickness [MM]: 1,025 | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 615395500 | 🇲🇽 MX | Replaces OE Part Number(s) 11044-70F00 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Cylinder Head Gasket parts are listed for the 2014 Nissan NP300, from ELRING, AJUSA and VICTOR REINZ. ELRING 715100 carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 52396000 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 53039600 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 372550 | 🇲🇽 MX | with valve stem seals | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 496050 | 🇲🇽 MX | without Cylinder Head Gasketwith valve stem seals | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 904650 | 🇲🇽 MX | with valve stem sealsDoes Not Include Cylinder Head Gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Cylinder Head Gasket Set parts are listed for the 2014 Nissan NP300, from ELRING and AJUSA.
Part numbers include AJUSA 52396000, AJUSA 53039600 and ELRING 372550, among others listed above.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 50357500 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 51044300 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2014 Nissan NP300.
Part numbers include AJUSA 50357500 and AJUSA 51044300.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030113 | 🇲🇽 MX | 1.031 Head Diameter. 0.234 Stem | View on Amazon |
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030843 | 🇲🇽 MX | 1.023 Head DIA. 0.234 Stem. 4.155 OAL. | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Exhaust Valve parts for the 2014 Nissan NP300 come from QUALCAST.
Part numbers include QUALCAST 1030113 and QUALCAST 1030843.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: all 2014 NP300 engines | 102369 | 🇲🇽 MX | View on Amazon | |
| DORMAN Fits: all 2014 NP300 engines | 594435 | 🇲🇽 MX | View on Amazon | |
| PIONEER Fits: all 2014 NP300 engines | DA2369 | 🇲🇽 MX | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
3 Harmonic Balancer parts are listed for the 2014 Nissan NP300, from ATP, DORMAN and PIONEER. All of them fit every engine offered in the 2014 NP300.
Part numbers include ATP 102369, DORMAN 594435 and PIONEER DA2369.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 13100700 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 13220800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 517600 | 🇲🇽 MX | Material: Metaloseal | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Intake Manifold Gasket parts are listed for the 2014 Nissan NP300, from AJUSA and ELRING.
Part numbers include AJUSA 13100700, AJUSA 13220800 and ELRING 517600.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030112 | 🇲🇽 MX | 1.110 Head DIA. 0.234 Stem | View on Amazon |
| QUALCAST Fits: 2.5L L4 DIESEL Turbocharged | 1030844 | 🇲🇽 MX | 1.125 Head DIA. 0.235 Stem. 4.172 OAL. | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
2 Intake Valve parts for the 2014 Nissan NP300 come from QUALCAST.
Part numbers include QUALCAST 1030112 and QUALCAST 1030844.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: 2.4L L4 | SKM8276 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| SKP Fits: 2.4L L4 | SKM2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 2.4L L4 | 2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.4L L4 | A2718 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| WESTAR Fits: 2.4L L4 | EM2718 | 🇲🇽 MX | Front | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.5L L4 DIESEL Turbocharged | 9483 | 🇲🇽 MX | Fits Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 DIESEL Turbocharged | AM342 | 🇲🇽 MX | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 2.5L L4 DIESEL Turbocharged | AM348 | 🇲🇽 MX | Front Left | View on Amazon |
| WESTAR Fits: 2.5L L4 DIESEL Turbocharged | EM9483 | 🇲🇽 MX | Front | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
9 Motor Mount parts for the 2014 Nissan NP300 come from 4 brands — DEA / MARMON RIDE CONTROL, SKP, ANCHOR and 1 other brand. The "Popular" part is ANCHOR 2718.
The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SKM8276 is listed in this group.
In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR supply 3 parts: built to original-equipment specification. A representative part number is ANCHOR 2718.
4 further parts sit outside the graded sections, with the same engine-level match.
Part numbers include ANCHOR 2718, SKP SKM8276 and SKP SKM2718, among others listed above.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 2.4L L4 | 301280 | 🇲🇽 MX | View on Amazon | |
| ANCHOR Fits: 2.5L L4 DIESEL Turbocharged | 300138 | 🇲🇽 MX | View on Amazon |
This table covers the Motor Mount kits.
2 Motor Mount Kit parts for the 2014 Nissan NP300 come from ANCHOR.
Part numbers include ANCHOR 301280 and ANCHOR 300138.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 2.5L L4 DIESEL Turbocharged | A38600006 | 🇲🇽 MX | with OE No. 213055M301 | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
This group shows a single part: ACKOJA A38600006.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 2.5L L4 DIESEL Turbocharged | 238 | 🇲🇽 MX | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 2.5L L4 DIESEL Turbocharged | 153 | 🇲🇽 MX | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 2014 Nissan NP300.
Part numbers include HAYDEN 238 and HAYDEN 153.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AGS Fits: all 2014 NP300 engines | ODP00011 | 🇲🇽 MX | M12x1.25 | View on Amazon |
| DORMAN Fits: all 2014 NP300 engines | 090038 | 🇲🇽 MX | StandardM12-1.25 | View on Amazon |
| DORMAN Fits: all 2014 NP300 engines | 090049 | 🇲🇽 MX | Pilot PointM12-1.25 | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 587290 | 🇲🇽 MX | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
This table covers the drain plugs in the oil pan.
4 Oil Drain Plug parts for the 2014 Nissan NP300 come from 3 brands — DORMAN, AGS and ELRING. 3 parts fit every engine; the other 1 is engine-specific.
This group includes AGS ODP00011, DORMAN 090038 and DORMAN 090049 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 01140600 | 🇲🇽 MX | with Original Equipment (OE) # 11026-BX000 | View on Amazon |
| DORMAN Fits: all 2014 NP300 engines | 097134 | 🇲🇽 MX | SizeM10 | View on Amazon |
| DORMAN Fits: all 2014 NP300 engines | 997134CD | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 776327 | 🇲🇽 MX | Material: CopperOuter Diameter [MM]: 17,5 | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Drain Plug Gasket parts are listed for the 2014 Nissan NP300, from DORMAN, AJUSA and ELRING. 2 parts fit every engine; the other 2 are engine-specific.
Part numbers include AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2014 NP300 engines | MO92 | 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
This group shows a single part: MOTORAD MO92.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: 2.5L L4 DIESEL Turbocharged | R1358 | 🇲🇽 MX | OE# 15400-PJ7-015 | View on Amazon |
| PRO-TEC Fits: 2.5L L4 DIESEL Turbocharged | PXL51358 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.4L L4 | PG4612 | 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 2.5L L4 DIESEL Turbocharged | PG4670 | 🇲🇽 MX | Spin-On | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 2.5L L4 DIESEL Turbocharged | 51358XP | 🇲🇽 MX | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 2.4L L4 | M1110A | 🇲🇽 MX | Extended Performance | View on Amazon |
| MOBIL Fits: 2.5L L4 DIESEL Turbocharged | M1204A | 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 2.5L L4 DIESEL Turbocharged | 51358 | 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 2.4L L4 | LF240 | 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 2.5L L4 DIESEL Turbocharged | LF113 | 🇲🇽 MX | View on Amazon | |
| MANN Fits: 2.5L L4 DIESEL Turbocharged | MW64 | 🇲🇽 MX | Height: 2.6 InStyle: Spin-On Lube Filter | View on Amazon |
| VARIOUS MFR Fits: 2.4L L4 | PG4612EX | 🇲🇽 MX | Extended Life | View on Amazon |
| VARIOUS MFR Fits: 2.5L L4 DIESEL Turbocharged | PG4670EX | 🇲🇽 MX | Extended LifeSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
13 Oil Filter parts for the 2014 Nissan NP300 come from 7 brands — VARIOUS MFR, WIX, MOBIL and 4 other brands. The "Popular" part is WIX 51358XP.
The Economy section: 4 options from VARIOUS MFR, FVP and PRO-TEC. FVP R1358 is listed in this group.
The High Performance / Heavy Duty section lists 3 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 51358XP is listed in this group.
Standard Replacement: 6 parts, from HASTINGS / BALDWIN, VARIOUS MFR, WIX and 1 other brand. A representative part number is WIX 51358.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.4L L4 | 264528 | 🇲🇽 MX | RWD | View on Amazon |
| SKP Fits: 2.4L L4 | SK264528 | 🇲🇽 MX | Gasket Not Included | View on Amazon |
| SKP Fits: 2.5L L4 DIESEL Turbocharged | SK264055 | 🇲🇽 MX | Fits 4WDPICKUP | View on Amazon |
| SPECTRA PREMIUM Fits: 2.4L L4 | NSP33A | 🇲🇽 MX | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
4 Oil Pan parts are listed for the 2014 Nissan NP300, from SKP, DORMAN and SPECTRA PREMIUM.
Part numbers include DORMAN 264528, SKP SK264528 and SKP SK264055, among others listed above.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 2.5L L4 DIESEL Turbocharged | 2D7531 | 🇲🇽 MX | Full Setfor 2 Ring Piston | View on Amazon |
| HASTINGS MANUFACTURING Fits: 2.5L L4 DIESEL Turbocharged | 2D7531S | 🇲🇽 MX | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
HASTINGS MANUFACTURING supplies both parts for the 2014 Nissan NP300.
Part numbers include HASTINGS MANUFACTURING 2D7531 and HASTINGS MANUFACTURING 2D7531S.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S920T | 🇲🇽 MX | Engine Timing Camshaft Sprocket | View on Amazon |
| FVP Fits: 2.4L L4 | S920T | 🇲🇽 MX | View on Amazon |
This table covers the Timing Cam sprockets.
2 Timing Cam Sprocket parts for the 2014 Nissan NP300 come from 2 brands — CLOYES and FVP.
Listed part numbers: CLOYES S920T, plus the other parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 94211 | 🇲🇽 MX | Engine Timing Chain | View on Amazon |
| CLOYES Fits: 2.4L L4 | 94210 | 🇲🇽 MX | Engine Timing Chain | View on Amazon |
| FVP Fits: 2.4L L4 | 94210 | 🇲🇽 MX | Lower | View on Amazon |
| FVP Fits: 2.4L L4 | 94211 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
4 Timing Chain parts are listed for the 2014 Nissan NP300, from CLOYES and FVP.
Part numbers include CLOYES 94211 and CLOYES 94210, among others listed above.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 94180SAX | 🇲🇽 MX | Does Not Include SprocketsIncludes: Timing Chain (2), Timing Chain Tensioner (2), Timing Chain Guide, Timing Chain Tensioner Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 94180SA | 🇲🇽 MX | Includes: Timing Chain (2), Timing Chain Tensioner (2), Timing Chain Guide, Timing Chain Tensioner Guide, Crankshaft Sprocket, Camshaft Sprocket (2), Timing Idler Sprocket | View on Amazon |
| INA Fits: 2.4L L4 | ZC94180SA | 🇲🇽 MX | Includes 2 Camshaft Sprocket, 2 Chains, 1 Chain Deflector Sprocket, 1 Crank Sprocket, 1 Guide, 1 Tensioner Arm, 2 Tensioners | View on Amazon |
| INA Fits: 2.5L L4 DIESEL Turbocharged | ZC0117K | 🇲🇽 MX | Includes Chain Protect Additive | View on Amazon |
| MELLING Fits: 2.4L L4 | 34210SA | 🇲🇽 MX | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
5 Timing Chain & Component Kit parts for the 2014 Nissan NP300 come from 3 brands — CLOYES, INA and MELLING.
Part numbers include CLOYES 94180SAX, CLOYES 94180SA and INA ZC94180SA, among others listed above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95240 | 🇲🇽 MX | Guide | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95239 | 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| FVP Fits: 2.4L L4 | 95239 | 🇲🇽 MX | Tensioner ArmRight | View on Amazon |
| FVP Fits: 2.4L L4 | 95240 | 🇲🇽 MX | Left Lower | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
4 Timing Chain Guide / Damper parts are listed for the 2014 Nissan NP300, from CLOYES and FVP.
Part numbers include CLOYES 95240 and CLOYES 95239, among others listed above.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | 95235 | 🇲🇽 MX | Lower | View on Amazon |
| CLOYES Fits: 2.4L L4 | 95236 | 🇲🇽 MX | Upper | View on Amazon |
| FVP Fits: 2.4L L4 | 95235 | 🇲🇽 MX | Lower | View on Amazon |
| FVP Fits: 2.4L L4 | 95236 | 🇲🇽 MX | Upper | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
4 Timing Chain Tensioner parts for the 2014 Nissan NP300 come from 2 brands — CLOYES and FVP.
This group includes CLOYES 95235 and CLOYES 95236 and the remaining parts above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 469280 | 🇲🇽 MX | Cab & ChassisEngine Code YD25DDTI | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 902970 | 🇲🇽 MX | Housing Material: Cast Aluminium | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Timing Cover Gasket parts for the 2014 Nissan NP300 come from ELRING.
This group includes ELRING 469280 and ELRING 902970.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S699 | 🇲🇽 MX | Outer | View on Amazon |
| FVP Fits: 2.4L L4 | S699 | 🇲🇽 MX | Outer | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
2 Timing Crank Sprocket parts for the 2014 Nissan NP300 come from 2 brands — CLOYES and FVP.
Listed part numbers: CLOYES S699, plus the other parts above.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 2.4L L4 | S909 | 🇲🇽 MX | Engine Timing Idler | View on Amazon |
| FVP Fits: 2.4L L4 | S909 | 🇲🇽 MX | View on Amazon |
This table covers the Timing Idler sprockets.
2 Timing Idler Sprocket parts are listed for the 2014 Nissan NP300, from CLOYES and FVP.
Part numbers include CLOYES S909, among others listed above.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | JTC11623 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 964390 | 🇲🇽 MX | Exhaust ManifoldCab & Chassis | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Turbocharger Gasket parts are listed for the 2014 Nissan NP300, from AJUSA and ELRING.
Part numbers include AJUSA JTC11623 and ELRING 964390.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 964490 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual | View on Amazon |
This table covers the fasteners that mount the turbocharger.
One part is listed for the 2014 Nissan NP300 — ELRING 964490.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 372490 | 🇲🇽 MX | Material: Polyacrylate Rubber (ACM) | View on Amazon |
| ELRING Popular Fits: 2.5L L4 DIESEL Turbocharged | 547310 | 🇲🇽 MX | Material: Polyacrylate Rubber (ACM) | View on Amazon |
| AJUSA Fits: 2.4L L4 | 56026200 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 11125500 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 903030 | 🇲🇽 MX | for plastic cylinder head cover | View on Amazon |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 518620 | 🇲🇽 MX | Cab & ChassisEngine Code YD25DDTI | View on Amazon |
| VICTOR REINZ Fits: 2.4L L4 | 155313801 | 🇲🇽 MX | SetIncludes Spark Plug Tube Seals | View on Amazon |
| VICTOR REINZ Fits: 2.5L L4 DIESEL Turbocharged | 715374900 | 🇲🇽 MX | Engine Code YD25DDTi | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Valve Cover Gasket parts for the 2014 Nissan NP300 come from 3 brands — ELRING, AJUSA and VICTOR REINZ. The "Popular" part is ELRING 372490.
Listed part numbers: ELRING 372490, ELRING 547310 and AJUSA 56026200, plus the other parts above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.4L L4 | 12008100 | 🇲🇽 MX | 6 x 10.7 x 11.5 | View on Amazon |
| AJUSA Fits: 2.4L L4 | 57021600 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 12012100 | 🇲🇽 MX | 5 x 9.7 x 11.5 | View on Amazon |
| AJUSA Fits: 2.5L L4 DIESEL Turbocharged | 57024800 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 2.5L L4 DIESEL Turbocharged | 012410 | 🇲🇽 MX | Height [MM]: 11,1Inner Diameter [MM]: 9,8 | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Valve Stem Seal parts for the 2014 Nissan NP300 come from 2 brands — AJUSA and ELRING.
This group includes AJUSA 12008100, AJUSA 57021600 and AJUSA 12012100 and the remaining parts above.
Buying Engine Parts for a 2014 Nissan NP300
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Oil Filter .
Frequently Asked Questions
How many engine parts fit the 2014 Nissan NP300?
Our catalog currently lists 133 engine parts for the 2014 Nissan NP300 across 35 subcategories and 29 brands, covering both the 2.4L L4 and the 2.5L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2014 Nissan NP300 engines?
Some do. 10 parts fit every engine; the other 123 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2014 Nissan NP300?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2014 Nissan NP300 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2014 Nissan NP300?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2014 Nissan NP300
Engine Parts for Other Nissan NP300 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.