2017 Nissan Versa Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts are listed for the 2017 Nissan Versa, from ELRING and SCHAEFFLER.

Listed part numbers: ELRING 073890 and SCHAEFFLER SS2377.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2017 Nissan Versa come from 3 brands — ENGINETECH, KING ENGINE BEARINGS and TOPLINE.

Listed part numbers: ENGINETECH BB1006, KING ENGINE BEARINGS CR4632SM and TOPLINE RBD48.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2017 Nissan Versa come from 4 brands — AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 54247800, APEX ACS5073 and FEL-PRO CS26714 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts are listed for the 2017 Nissan Versa, from TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Listed part numbers: ENGINETECH BC1003, KING ENGINE BEARINGS MB5767SI and TOPLINE MBD48, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2017 Nissan Versa, from BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Crankshaft Seal parts are listed for the 2017 Nissan Versa, from FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 6 other brands. FEL-PRO BS40714 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts for the 2017 Nissan Versa come from 5 brands — FEL-PRO, APEX, ENGINETECH and 2 other brands. The "Popular" part is FEL-PRO ES73028.

This group includes FEL-PRO ES73028, APEX AHB561 and ENGINETECH HB109 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2017 Nissan Versa come from 5 brands — ELRING, APEX, FEL-PRO and 2 other brands. The "Popular" part is APEX AHG573.

Listed part numbers: APEX AHG573, FEL-PRO 26714PT and AJUSA 10214300, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2017 Nissan Versa come from 5 brands — ENGINETECH, AJUSA, ELRING and 2 other brands. The "Popular" part is ENGINETECH NI16HSA.

Part numbers include ENGINETECH NI16HSA, AJUSA 52479600 and ELRING 434330, among others listed above.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2017 Nissan Versa come from 2 brands — TECHPRO and VARIOUS MFR.

This group includes TECHPRO NI1228148 and TECHPRO NI1228153 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50433400.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts are listed for the 2017 Nissan Versa, from ENGINETECH, SBI and TOPLINE.

This group includes ENGINETECH EM1019, SBI 13234 and TOPLINE EVD48.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2017 Nissan Versa come from 2 brands — ATP and DAYCO.

This group includes ATP 102494 and DAYCO PB1813N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2017 Nissan Versa come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS97359.

This group includes FEL-PRO MS97359, AJUSA 13259000 and APEX AMS5730 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts are listed for the 2017 Nissan Versa, from ENGINETECH, SBI and TOPLINE.

Part numbers include ENGINETECH IM1020, SBI 13233 and TOPLINE IVD48L.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts are listed for the 2017 Nissan Versa, from SKP, ANCHOR, BECK/ARNLEY and 2 other brands. ANCHOR 9828 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKMA7368.

The Standard Replacement section lists 4 options from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 1 other brand — built to original-equipment specification. ANCHOR 9828 is listed in this group.

This group includes ANCHOR 9828, SKP SKMA7368 and BECK/ARNLEY 1042439 and the remaining parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2017 Nissan Versa — ANCHOR 300361.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

53 Oil parts are listed for the 2017 Nissan Versa, from LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Conventional, Full Synthetic, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 38 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2017 Nissan Versa — DORMAN 918939.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts for the 2017 Nissan Versa come from 3 brands — BECK/ARNLEY, FEL-PRO and MAHLE / CLEVITE.

Part numbers include BECK/ARNLEY 0396688, FEL-PRO 72493 and MAHLE / CLEVITE B32450.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts are listed for the 2017 Nissan Versa, from DORMAN, ELRING, AGS and 3 other brands. DORMAN 090038 carries the "Popular" badge.

Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2017 Nissan Versa come from 5 brands — DORMAN, FEL-PRO, AJUSA and 2 other brands. The "Popular" part is DORMAN 097134.

This group includes DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2017 Nissan Versa, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge.

Listed part numbers: MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2017 Nissan Versa, from VARIOUS MFR, BOSCH, WIX and 10 other brands. MOBIL M1108A carries the "Popular" badge.

Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72230WS.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 9 options from BOSCH, MOTORCRAFT, WIX and 6 other brands. BOSCH 3300 is listed in this group.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2017 Nissan Versa — ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts for the 2017 Nissan Versa come from 4 brands — ACKOJA, DORMAN, REIN and 1 other brand.

Listed part numbers: ACKOJA A380495, DORMAN 264061 and REIN ESK0212, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2017 Nissan Versa, from VICTOR REINZ, APEX, ELRING and 2 other brands. VICTOR REINZ 703141410 carries the "Popular" badge.

Listed part numbers: VICTOR REINZ 703141410, APEX AOP573 and ELRING 380960, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2017 Nissan Versa — TOPLINE OPD50.

This table covers the chains that drive the oil pump. Read more

5 Oil Pump Chain parts for the 2017 Nissan Versa come from 4 brands — S.A. GEAR, CLOYES, FVP and 1 other brand. The "Popular" part is S.A. GEAR C1161.

The Kit section lists 1 option from S.A. GEAR — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. S.A. GEAR 76402P is listed in this group.

Standard Replacement: 2 parts, from S.A. GEAR and CLOYES. A representative part number is S.A. GEAR C1161.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: S.A. GEAR C1161, S.A. GEAR 76402P and CLOYES C735F, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts are listed for the 2017 Nissan Versa, from CLOYES, FVP and S.A. GEAR.

Part numbers include CLOYES 95681 and S.A. GEAR 91318, among others listed above.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 2017 Nissan Versa come from 3 brands — CLOYES, FVP and S.A. GEAR.

This group includes CLOYES S991 and S.A. GEAR S1462 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts for the 2017 Nissan Versa come from 2 brands — ENGINETECH and TOPLINE.

In the Premium grade, ENGINETECH supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH P15114.

Standard Replacement: 1 part, from TOPLINE. A representative part number is TOPLINE PAD50.

This group includes ENGINETECH P15114, ENGINETECH K15114P and TOPLINE PAD50.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts for the 2017 Nissan Versa come from 3 brands — HASTINGS MANUFACTURING, ENGINETECH and TOPLINE.

Premium: 1 part, from ENGINETECH. A representative part number is ENGINETECH M30704.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4439.

Part numbers include ENGINETECH M30704, HASTINGS MANUFACTURING 2C4439 and HASTINGS MANUFACTURING 2C4439S, among others listed above.

This table covers the Thrust washers. Read more

One part is listed for the 2017 Nissan Versa — ENGINETECH TW1003STD.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 2017 Nissan Versa — CLOYES S984T.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts for the 2017 Nissan Versa come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Part numbers include CLOYES C734F and INA ZCC734F, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts are listed for the 2017 Nissan Versa, from S.A. GEAR, CLOYES and GATES. S.A. GEAR 76402 carries the "Popular" badge.

Economy: 4 parts, from S.A. GEAR and GATES. A representative part number is S.A. GEAR 76402.

The Standard Replacement section: 2 options from CLOYES. CLOYES 94219SA is listed in this group.

Part numbers include S.A. GEAR 76402, GATES CHK142 and S.A. GEAR 76402T, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts for the 2017 Nissan Versa come from 3 brands — S.A. GEAR, CLOYES and FVP. The "Popular" part is S.A. GEAR 91317.

Listed part numbers: S.A. GEAR 91317, S.A. GEAR 71240 and CLOYES 95682, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts are listed for the 2017 Nissan Versa, from S.A. GEAR, BECK/ARNLEY, CLOYES and 1 other brand. S.A. GEAR 91318 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 91318, BECK/ARNLEY 0242048 and CLOYES 95680, plus the other parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2017 Nissan Versa — MAHLE / CLEVITE 67693.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts are listed for the 2017 Nissan Versa, from CLOYES, FVP, INA and 1 other brand.

This group includes CLOYES S989 and INA ZSS989 and the remaining parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts for the 2017 Nissan Versa come from 5 brands — BECK/ARNLEY, SKP, ULTRA-POWER and 2 other brands. The "Popular" part is ANCHOR 9671.

The Economy section: 3 options from BECK/ARNLEY, SKP and ULTRA-POWER. BECK/ARNLEY 1042171 is listed in this group.

Standard Replacement: 2 parts, from ANCHOR and DEA / MARMON RIDE CONTROL. A representative part number is ANCHOR 9671.

Part numbers include ANCHOR 9671, BECK/ARNLEY 1042171 and SKP SKMA7369, among others listed above.

This table covers the Valve covers. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0966116.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts are listed for the 2017 Nissan Versa, from BECK/ARNLEY, FEL-PRO, AJUSA and 3 other brands. BECK/ARNLEY 0362082 carries the "Popular" badge.

Listed part numbers: BECK/ARNLEY 0362082, FEL-PRO VS50891R and AJUSA 11144500, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

TOPLINE supplies both parts for the 2017 Nissan Versa.

This group includes TOPLINE EVGD48 and TOPLINE IVGD48.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: SBI 1601603.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 2017 Nissan Versa, from ELRING, FEL-PRO, MAHLE / CLEVITE and 2 other brands. ELRING 403730 carries the "Popular" badge.

Listed part numbers: ELRING 403730, FEL-PRO SS73022 and MAHLE / CLEVITE SS46132, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

25 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2017 Nissan Versa, from DORMAN, ROSTRA, SKP and 11 other brands. DORMAN 918116 carries the "Popular" badge.

Economy: 15 parts, from DORMAN, ROSTRA, SKP and 5 other brands. A representative part number is DORMAN 918116.

The Standard Replacement section: 10 options from ACKOJA, BECK/ARNLEY, CLOYES and 3 other brands. ASTEMO / HITACHI VTS0012 is listed in this group.