2018 Nissan Versa Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts for the 2018 Nissan Versa come from 2 brands — ELRING and SCHAEFFLER.

This group includes ELRING 073890 and SCHAEFFLER SS2377.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts are listed for the 2018 Nissan Versa, from ENGINETECH, KING ENGINE BEARINGS and TOPLINE.

Part numbers include ENGINETECH BB1006, KING ENGINE BEARINGS CR4632SM and TOPLINE RBD48.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2018 Nissan Versa, from AJUSA, APEX, FEL-PRO and 1 other brand.

This group includes AJUSA 54247800, APEX ACS5073 and FEL-PRO CS26714 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Crankshaft Main Bearing parts for the 2018 Nissan Versa come from 3 brands — TOPLINE, ENGINETECH and KING ENGINE BEARINGS.

Listed part numbers: ENGINETECH BC1003, KING ENGINE BEARINGS MB5767SI and TOPLINE MBD48, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2018 Nissan Versa come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Listed part numbers: BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Crankshaft Seal parts for the 2018 Nissan Versa come from 9 brands — FEL-PRO, NATIONAL, WJB / INMOTION PARTS and 6 other brands. The "Popular" part is FEL-PRO BS40714.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Nissan Versa — ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2018 Nissan Versa, from FEL-PRO, APEX, ENGINETECH and 2 other brands. FEL-PRO ES73028 carries the "Popular" badge.

Part numbers include FEL-PRO ES73028, APEX AHB561 and ENGINETECH HB109, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2018 Nissan Versa, from ELRING, APEX, FEL-PRO and 2 other brands. APEX AHG573 carries the "Popular" badge.

This group includes APEX AHG573, FEL-PRO 26714PT and AJUSA 10214300 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts are listed for the 2018 Nissan Versa, from AJUSA, ELRING, ENGINETECH and 1 other brand.

Listed part numbers: AJUSA 52479600, ELRING 434330 and ENGINETECH NI16HSA, plus the other parts above.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2018 Nissan Versa, from TECHPRO and VARIOUS MFR.

This group includes TECHPRO NI1228148 and TECHPRO NI1228153 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2018 Nissan Versa — AJUSA 50433400.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2018 Nissan Versa come from 3 brands — ENGINETECH, SBI and TOPLINE.

Listed part numbers: ENGINETECH EM1019, SBI 13234 and TOPLINE EVD48.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2018 Nissan Versa, from ATP and DAYCO.

Listed part numbers: ATP 102494 and DAYCO PB1813N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 2018 Nissan Versa, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO MS97359 carries the "Popular" badge.

This group includes FEL-PRO MS97359, AJUSA 13259000 and APEX AMS5730 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2018 Nissan Versa come from 3 brands — ENGINETECH, SBI and TOPLINE.

Listed part numbers: ENGINETECH IM1020, SBI 13233 and TOPLINE IVD48L.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2018 Nissan Versa come from 4 brands — ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 1 other brand.

Listed part numbers: ANCHOR 9828, BECK/ARNLEY 1042439 and DEA / MARMON RIDE CONTROL A7368, plus the other parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300361.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

45 Oil parts for the 2018 Nissan Versa come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 20438. They are grouped as Full Synthetic, High Mileage (>75,000 Miles) and Racing, with Full Synthetic the largest group at 33 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: DORMAN 918939.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts are listed for the 2018 Nissan Versa, from BECK/ARNLEY, FEL-PRO and MAHLE / CLEVITE.

Part numbers include BECK/ARNLEY 0396688, FEL-PRO 72493 and MAHLE / CLEVITE B32450.

This table covers the drain plugs in the oil pan. Read more

8 Oil Drain Plug parts for the 2018 Nissan Versa come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090038.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2018 Nissan Versa, from DORMAN, FEL-PRO, AJUSA and 2 other brands. DORMAN 097134 carries the "Popular" badge.

Part numbers include DORMAN 097134, FEL-PRO 73347 and AJUSA 01140600, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2018 Nissan Versa come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107.

This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2018 Nissan Versa come from 13 brands — VARIOUS MFR, BOSCH, WIX and 10 other brands. The "Popular" part is MOBIL M1108A.

The Economy section lists 6 options from VARIOUS MFR, BOSCH, FRAM and 2 other brands — the catalog's value-priced group. BOSCH 72230WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, BOSCH, MOTORCRAFT, WIX and 6 other brands supply 9 parts: built to original-equipment specification. A representative part number is BOSCH 3300.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts are listed for the 2018 Nissan Versa, from DORMAN, REIN and SPECTRA PREMIUM.

This group includes DORMAN 264061, REIN ESK0212 and SPECTRA PREMIUM NSP37A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2018 Nissan Versa come from 5 brands — VICTOR REINZ, APEX, ELRING and 2 other brands. The "Popular" part is VICTOR REINZ 703141410.

Part numbers include VICTOR REINZ 703141410, APEX AOP573 and ELRING 380960, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: TOPLINE OPD50.

This table covers the chains that drive the oil pump. Read more

5 Oil Pump Chain parts are listed for the 2018 Nissan Versa, from S.A. GEAR, CLOYES, FVP and 1 other brand. S.A. GEAR C1161 carries the "Popular" badge.

In the Kit grade, S.A. GEAR supplies 1 part: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is S.A. GEAR 76402P.

The Standard Replacement section: 2 options from S.A. GEAR and CLOYES. S.A. GEAR C1161 is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

Listed part numbers: S.A. GEAR C1161, S.A. GEAR 76402P and CLOYES C735F, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Oil Pump Chain Tensioner parts for the 2018 Nissan Versa come from 3 brands — CLOYES, FVP and S.A. GEAR.

Part numbers include CLOYES 95681 and S.A. GEAR 91318, among others listed above.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts are listed for the 2018 Nissan Versa, from CLOYES, FVP and S.A. GEAR.

This group includes CLOYES S991 and S.A. GEAR S1462 and the remaining parts above.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

3 Piston parts are listed for the 2018 Nissan Versa, from ENGINETECH and TOPLINE.

The Premium section lists 2 options from ENGINETECH — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P15114 is listed in this group.

The Standard Replacement section: 1 option from TOPLINE. TOPLINE PAD50 is listed in this group.

Listed part numbers: ENGINETECH P15114, ENGINETECH K15114P and TOPLINE PAD50.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts are listed for the 2018 Nissan Versa, from HASTINGS MANUFACTURING, ENGINETECH and TOPLINE.

The Premium section: 1 option from ENGINETECH. ENGINETECH M30704 is listed in this group.

The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and TOPLINE. HASTINGS MANUFACTURING 2C4439 is listed in this group.

Listed part numbers: ENGINETECH M30704, HASTINGS MANUFACTURING 2C4439 and HASTINGS MANUFACTURING 2C4439S, plus the other parts above.

This table covers the Thrust washers. Read more

This group shows a single part: ENGINETECH TW1003STD.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2018 Nissan Versa, from CLOYES, FVP, INA and 1 other brand.

Part numbers include CLOYES C734F and INA ZCC734F, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

6 Timing Chain & Component Kit parts for the 2018 Nissan Versa come from 3 brands — S.A. GEAR, CLOYES and GATES. The "Popular" part is S.A. GEAR 76402.

The Economy section: 4 options from S.A. GEAR and GATES. S.A. GEAR 76402 is listed in this group.

Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 94219SA.

Listed part numbers: S.A. GEAR 76402, GATES CHK142 and S.A. GEAR 76402T, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

6 Timing Chain Guide / Damper parts are listed for the 2018 Nissan Versa, from S.A. GEAR, CLOYES and FVP. S.A. GEAR 91317 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 91317, S.A. GEAR 71240 and CLOYES 95682, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts for the 2018 Nissan Versa come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Listed part numbers: CLOYES 95680 and INA ZT95680, plus the other parts above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: MAHLE / CLEVITE 67693.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2018 Nissan Versa come from 4 brands — CLOYES, FVP, INA and 1 other brand.

Part numbers include CLOYES S989 and INA ZSS989, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts are listed for the 2018 Nissan Versa, from BECK/ARNLEY, ANCHOR and DEA / MARMON RIDE CONTROL.

Economy: 1 part, from BECK/ARNLEY. A representative part number is BECK/ARNLEY 1042171.

The Standard Replacement section: 2 options from ANCHOR and DEA / MARMON RIDE CONTROL. ANCHOR 9671 is listed in this group.

Part numbers include BECK/ARNLEY 1042171, ANCHOR 9671 and DEA / MARMON RIDE CONTROL A7369.

This table covers the Valve covers. Read more

One part is listed for the 2018 Nissan Versa — ITM ENGINE COMPONENTS 0966116.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Valve Cover Gasket parts for the 2018 Nissan Versa come from 6 brands — BECK/ARNLEY, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is BECK/ARNLEY 0362082.

Listed part numbers: BECK/ARNLEY 0362082, FEL-PRO VS50891R and AJUSA 11144500, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

2 Valve Guide parts for the 2018 Nissan Versa come from TOPLINE.

Part numbers include TOPLINE EVGD48 and TOPLINE IVGD48.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2018 Nissan Versa — SBI 1601603.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2018 Nissan Versa come from 5 brands — ELRING, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ELRING 403730.

Part numbers include ELRING 403730, FEL-PRO SS73022 and MAHLE / CLEVITE SS46132, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

25 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Nissan Versa come from 14 brands — DORMAN, ROSTRA, SKP and 11 other brands. The "Popular" part is DORMAN 918116.

The Economy section: 15 options from DORMAN, ROSTRA, SKP and 5 other brands. DORMAN 918116 is listed in this group.

Standard Replacement: 10 parts, from ACKOJA, BECK/ARNLEY, CLOYES and 3 other brands. A representative part number is ASTEMO / HITACHI VTS0012.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

7 Variable Valve Timing (VVT) Sprocket parts for the 2018 Nissan Versa come from 6 brands — GATES, SPECTRA PREMIUM, ASTEMO / HITACHI and 3 other brands. The "Popular" part is ASTEMO / HITACHI VTG0005.

The Economy section: 1 option from SPECTRA PREMIUM. SPECTRA PREMIUM CSP1026 is listed in this group.

Standard Replacement: 6 parts, from GATES, ASTEMO / HITACHI, STANDARD MOTOR PRODUCTS and 2 other brands. A representative part number is ASTEMO / HITACHI VTG0005.

Listed part numbers: ASTEMO / HITACHI VTG0005, SPECTRA PREMIUM CSP1026 and STANDARD MOTOR PRODUCTS VVT532, plus the other parts above.