2021 Nissan Versa Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2021 Nissan Versa — KING ENGINE BEARINGS CR4632SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 Nissan Versa — AJUSA 54206600.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS MB5767SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts for the 2021 Nissan Versa come from 5 brands — FEL-PRO, NATIONAL, APEX and 2 other brands. The "Popular" part is FEL-PRO BS40714.

Listed part numbers: FEL-PRO BS40714, NATIONAL 710621 and APEX ABS556, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2021 Nissan Versa — ENGINETECH HB109.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Cylinder Head Gasket parts are listed for the 2021 Nissan Versa, from AJUSA, APEX and FEL-PRO.

Listed part numbers: AJUSA 10214300, APEX AHG573 and FEL-PRO 26866PT.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 Nissan Versa — AJUSA 52479600.

This table covers the Engine covers. Read more

One part is listed for the 2021 Nissan Versa — TECHPRO NI1228173.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2021 Nissan Versa — AJUSA 50572700.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts for the 2021 Nissan Versa come from 2 brands — ENGINETECH and SBI.

Listed part numbers: ENGINETECH EM1019 and SBI 13234.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2021 Nissan Versa — DAYCO PB1813N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2021 Nissan Versa — AJUSA 13259000.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts for the 2021 Nissan Versa come from 2 brands — ENGINETECH and SBI.

Part numbers include ENGINETECH IM1020 and SBI 13233.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Motor Mount parts for the 2021 Nissan Versa come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10129, DEA / MARMON RIDE CONTROL A4397 and PIONEER 610129, plus the other parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300795.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

37 Oil parts for the 2021 Nissan Versa come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

4 Oil Cooler parts for the 2021 Nissan Versa come from 3 brands — STANDARD MOTOR PRODUCTS, DORMAN and GPD.

Part numbers include DORMAN 918939, GPD 2611427 and STANDARD MOTOR PRODUCTS OCK83, among others listed above.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2021 Nissan Versa — FEL-PRO 72493.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2021 Nissan Versa come from 4 brands — DORMAN, BECK/ARNLEY, ENGINETECH and 1 other brand. The "Popular" part is DORMAN 090038.

This group includes DORMAN 090038, BECK/ARNLEY 0160116 and DORMAN 090049 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2021 Nissan Versa, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge.

This group includes DORMAN 097134, AJUSA 01140600 and APEX ADP1904 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2021 Nissan Versa come from 4 brands — DORMAN, GATES, MOTORAD and 1 other brand.

Part numbers include DORMAN 90200, GATES 31115 and MOTORAD MO107, among others listed above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 2021 Nissan Versa come from 12 brands — VARIOUS MFR, WIX, CHAMP / LUBER-FINER and 9 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section lists 6 options from VARIOUS MFR, CHAMP / LUBER-FINER, FRAM and 2 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, WIX, ACDELCO, BECK/ARNLEY and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is WIX 51358.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

2 Oil Pump Chain parts are listed for the 2021 Nissan Versa, from CLOYES and S.A. GEAR.

This group includes CLOYES C535 and S.A. GEAR C1278.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts for the 2021 Nissan Versa come from 2 brands — CLOYES and S.A. GEAR.

Part numbers include CLOYES 95681 and S.A. GEAR 91492.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts are listed for the 2021 Nissan Versa, from CLOYES and S.A. GEAR.

Listed part numbers: CLOYES S991 and S.A. GEAR S1589.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2021 Nissan Versa.

This group includes HASTINGS MANUFACTURING 2N5279 and HASTINGS MANUFACTURING 2N5279S.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2021 Nissan Versa, from CLOYES and S.A. GEAR.

Part numbers include CLOYES C534 and S.A. GEAR C1277.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts for the 2021 Nissan Versa come from 2 brands — CLOYES and S.A. GEAR.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76495 is listed in this group.

Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 90534SX.

Part numbers include S.A. GEAR 76495, CLOYES 90534SX and CLOYES 90534S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

4 Timing Chain Guide / Damper parts are listed for the 2021 Nissan Versa, from CLOYES and S.A. GEAR.

Part numbers include CLOYES 96197, CLOYES 95683 and S.A. GEAR 71354, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Timing Chain Tensioner parts for the 2021 Nissan Versa come from 2 brands — CLOYES and S.A. GEAR.

This group includes CLOYES 96196 and S.A. GEAR 91490.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2021 Nissan Versa come from 2 brands — SKF and WJB / INMOTION PARTS.

Part numbers include SKF 15749A and WJB / INMOTION PARTS WS15749A.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2021 Nissan Versa come from 2 brands — CLOYES and S.A. GEAR.

Part numbers include CLOYES S989 and S.A. GEAR S1588.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

4 Torque Strut Mount parts are listed for the 2021 Nissan Versa, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand.

Listed part numbers: ANCHOR 10163, DEA / MARMON RIDE CONTROL A4387 and PIONEER 630163, plus the other parts above.

This table covers the Valve covers. Read more

4 Valve Cover parts are listed for the 2021 Nissan Versa, from APEX, AUTOTECNICA, DORMAN and 1 other brand.

This group includes APEX VCS575, AUTOTECNICA NI1423151 and DORMAN 263271 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts for the 2021 Nissan Versa come from 3 brands — AJUSA, APEX and BECK/ARNLEY.

Part numbers include AJUSA 11144500, APEX AVC575S and BECK/ARNLEY 0362070.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2021 Nissan Versa — SBI 1601603.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 2021 Nissan Versa come from AJUSA.

This group includes AJUSA 12028900 and AJUSA 57052600.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

8 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2021 Nissan Versa come from 5 brands — WELLS, NTK, GATES and 2 other brands. The "Popular" part is GATES VVS193.

The Economy section: 4 options from WELLS and GATES. GATES VVS193 is listed in this group.

Standard Replacement: 4 parts, from NTK, STANDARD MOTOR PRODUCTS and CLOYES. A representative part number is STANDARD MOTOR PRODUCTS VVT142.

This group includes GATES VVS193, WELLS 2T1208 and WELLS 2T1038 and the remaining parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS VVT790.