2025 Nissan Versa Engine Parts

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2025 Nissan Versa come from 4 brands — FEL-PRO, MAHLE / CLEVITE, NATIONAL and 1 other brand. The "Popular" part is FEL-PRO BS40714.

Listed part numbers: FEL-PRO BS40714, FEL-PRO TCS46206 and MAHLE / CLEVITE 67838, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2025 Nissan Versa — FEL-PRO 26866PT.

This table covers the Engine covers. Read more

One part is listed for the 2025 Nissan Versa — TECHPRO NI1228173.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A4397.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

33 Oil parts for the 2025 Nissan Versa come from 5 brands — LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts for the 2025 Nissan Versa come from 2 brands — GPD and STANDARD MOTOR PRODUCTS.

Part numbers include GPD 2611427 and STANDARD MOTOR PRODUCTS OCK83.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts for the 2025 Nissan Versa come from 2 brands — DORMAN and REIN.

This group includes DORMAN 090038, DORMAN 090049 and REIN HWU0112.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2025 Nissan Versa come from 3 brands — CALORSTAT, GATES and MOTORAD.

Listed part numbers: CALORSTAT OC2316, GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 2025 Nissan Versa come from 12 brands — BOSCH, VARIOUS MFR, WIX and 9 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876.

The Economy section lists 6 options from CHAMP / LUBER-FINER, BOSCH, FRAM and 3 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, BOSCH, ACDELCO, BECK/ARNLEY and 4 other brands supply 7 parts: built to original-equipment specification. A representative part number is BOSCH 3300.

This table covers the chains that drive the oil pump. Read more

One part is listed for the 2025 Nissan Versa — S.A. GEAR C1278.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: S.A. GEAR 91492.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2025 Nissan Versa — S.A. GEAR S1589.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2025 Nissan Versa — S.A. GEAR C1277.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: S.A. GEAR 76495.

This table covers the guides and dampers that keep the timing chain on its path. Read more

S.A. GEAR supplies both parts for the 2025 Nissan Versa.

Part numbers include S.A. GEAR 71354 and S.A. GEAR 91491.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: S.A. GEAR 91490.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: S.A. GEAR S1588.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2025 Nissan Versa — DEA / MARMON RIDE CONTROL A4387.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: BECK/ARNLEY 0362070.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

3 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 Nissan Versa come from 3 brands — GATES, WELLS and CLOYES.

The Economy section: 2 options from GATES and WELLS. GATES VVS193 is listed in this group.

Standard Replacement: 1 part, from CLOYES. A representative part number is CLOYES VTS233.

Part numbers include GATES VVS193, WELLS 2T1208 and CLOYES VTS233.