2021 Nissan Murano Engine Parts

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRD41.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2021 Nissan Murano come from 2 brands — KING ENGINE BEARINGS and TOPLINE.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6775XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS and TOPLINE supply 2 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6775CP.

Listed part numbers: KING ENGINE BEARINGS CR6775XP, KING ENGINE BEARINGS CR6775XPX and KING ENGINE BEARINGS CR6775CP, plus the other parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2021 Nissan Murano come from 3 brands — AJUSA, MAHLE / CLEVITE and TOPLINE.

Listed part numbers: AJUSA 54270200, MAHLE / CLEVITE CS54587 and TOPLINE CBSD34.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2021 Nissan Murano, from KING ENGINE BEARINGS and TOPLINE. TOPLINE TWD34 carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB4058XPX.

The Standard Replacement section: 3 options from TOPLINE and KING ENGINE BEARINGS. TOPLINE TWD34 is listed in this group.

Listed part numbers: TOPLINE TWD34, KING ENGINE BEARINGS MB4058XPX and KING ENGINE BEARINGS MB4058XP, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts are listed for the 2021 Nissan Murano, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 15092900, AJUSA 71008800 and MAHLE / CLEVITE 67764.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2021 Nissan Murano come from 4 brands — AJUSA, BECK/ARNLEY, MAHLE / CLEVITE and 1 other brand.

Part numbers include AJUSA 81047800, BECK/ARNLEY 0161026 and MAHLE / CLEVITE GS33612, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2021 Nissan Murano come from 3 brands — APEX, AJUSA and MAHLE / CLEVITE. The "Popular" part is APEX AHG562L.

This group includes APEX AHG562L, APEX AHG562R and AJUSA 10181300 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2021 Nissan Murano come from 3 brands — AJUSA, MAHLE / CLEVITE and TOPLINE.

Part numbers include AJUSA 52662300, MAHLE / CLEVITE HS54587B and TOPLINE HSD41A.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2021 Nissan Murano come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO NI1228165 and TECHPRO NI1228166, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2021 Nissan Murano come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 50590200 and TOPLINE CGSD41A.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2021 Nissan Murano, from SBI and TOPLINE.

Part numbers include SBI 13221 and TOPLINE EVD41HRL.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: DAYCO PB1682N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2021 Nissan Murano come from 4 brands — AJUSA, BECK/ARNLEY, FEL-PRO and 1 other brand.

Part numbers include AJUSA 13261900, BECK/ARNLEY 0376177 and FEL-PRO MS97143, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts for the 2021 Nissan Murano come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Part numbers include DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts are listed for the 2021 Nissan Murano, from AJUSA, FEL-PRO and MAHLE / CLEVITE.

This group includes AJUSA 01291300, FEL-PRO MS97220 and MAHLE / CLEVITE MS19419.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2021 Nissan Murano — TOPLINE IVD41HRL.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts are listed for the 2021 Nissan Murano, from ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand. SKP SKM9808 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SKM9808.

The Standard Replacement section: 11 options from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. ANCHOR 9808 is listed in this group.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2021 Nissan Murano.

Part numbers include ANCHOR 300211 and ANCHOR 300307.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

38 Oil parts are listed for the 2021 Nissan Murano, from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 31 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2021 Nissan Murano, from ACKOJA and STANDARD MOTOR PRODUCTS.

This group includes ACKOJA A38600022 and STANDARD MOTOR PRODUCTS OCK78.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Oil Cooler Seal parts for the 2021 Nissan Murano come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 72493, FEL-PRO 71863 and MAHLE / CLEVITE B33344.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2021 Nissan Murano — AUTOTECNICA NI1421464.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2021 Nissan Murano, from DORMAN, BECK/ARNLEY, ENGINETECH and 1 other brand. DORMAN 090038 carries the "Popular" badge.

Listed part numbers: DORMAN 090038, BECK/ARNLEY 0160116 and DORMAN 090049, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2021 Nissan Murano come from 4 brands — DORMAN, AJUSA, APEX and 1 other brand. The "Popular" part is DORMAN 097134.

Listed part numbers: DORMAN 097134, AJUSA 01140600 and APEX ADP1904, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2021 Nissan Murano, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge.

This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 2021 Nissan Murano, from VARIOUS MFR, BOSCH, WIX and 11 other brands. CHAMP / LUBER-FINER PH2876 carries the "Popular" badge.

Economy: 7 parts, from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. A representative part number is CHAMP / LUBER-FINER PH2876.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 9 options from BOSCH, WIX, ACDELCO and 6 other brands. BOSCH 3300 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2021 Nissan Murano come from 5 brands — ACKOJA, DORMAN, SKP and 2 other brands.

Part numbers include ACKOJA A380555, DORMAN 264505 and SKP SK264465, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 2021 Nissan Murano, from MAHLE / CLEVITE, AJUSA and VICTOR REINZ.

Part numbers include AJUSA 59010400, MAHLE / CLEVITE OS32250 and MAHLE / CLEVITE OS32249, among others listed above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

One part is listed for the 2021 Nissan Murano — TOPLINE OPD41M.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2021 Nissan Murano, from ENGINETECH and TOPLINE.

Part numbers include ENGINETECH EB0156 and TOPLINE PBD34.

This table covers the Thrust washers. Read more

One part is listed for the 2021 Nissan Murano — KING ENGINE BEARINGS TW271AM.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts for the 2021 Nissan Murano come from 3 brands — MELLING, S.A. GEAR and CLOYES. The "Popular" part is MELLING 721.

Listed part numbers: MELLING 721, S.A. GEAR RC1038 and CLOYES C721F, plus the other parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts are listed for the 2021 Nissan Murano, from S.A. GEAR, CLOYES, INA and 1 other brand. CLOYES 90730SB carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76280S.

The Standard Replacement section: 3 options from CLOYES, INA and MELLING. CLOYES 90730SB is listed in this group.

Part numbers include CLOYES 90730SB, S.A. GEAR 76280S and S.A. GEAR 76280SW, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

8 Timing Chain Guide / Damper parts for the 2021 Nissan Murano come from 3 brands — S.A. GEAR, CLOYES and MELLING. The "Popular" part is S.A. GEAR 71009.

Part numbers include S.A. GEAR 71009, S.A. GEAR 91147 and CLOYES 95594, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

9 Timing Chain Tensioner parts are listed for the 2021 Nissan Murano, from S.A. GEAR, CLOYES and MELLING. S.A. GEAR 9441 carries the "Popular" badge.

Part numbers include S.A. GEAR 9441, S.A. GEAR 91009 and CLOYES 95441, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

MAHLE / CLEVITE supplies the 3 Timing Cover Gasket parts for the 2021 Nissan Murano.

Listed part numbers: MAHLE / CLEVITE B33343, MAHLE / CLEVITE B33342 and MAHLE / CLEVITE JV5276.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2021 Nissan Murano, from MAHLE / CLEVITE and SKF.

Listed part numbers: MAHLE / CLEVITE 67689 and SKF 18857.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts are listed for the 2021 Nissan Murano, from CLOYES and MELLING.

Part numbers include CLOYES S947 and MELLING S1221.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts for the 2021 Nissan Murano come from 3 brands — ANCHOR, DEA / MARMON RIDE CONTROL and SKP. The "Popular" part is SKP SKM9747.

The Economy section: 1 option from SKP. SKP SKM9747 is listed in this group.

Standard Replacement: 4 parts, from ANCHOR and DEA / MARMON RIDE CONTROL. A representative part number is ANCHOR 9747.

This group includes SKP SKM9747, ANCHOR 9747 and ANCHOR 9551 and the remaining parts above.

This table covers the Valve covers. Read more

5 Valve Cover parts for the 2021 Nissan Murano come from 3 brands — APEX, DORMAN and ACKOJA. The "Popular" part is APEX VCS528R.

Listed part numbers: APEX VCS528R, ACKOJA A380699 and APEX VCS528L, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Valve Cover Gasket parts are listed for the 2021 Nissan Murano, from APEX, AJUSA, BECK/ARNLEY and 2 other brands. APEX AVC562 carries the "Popular" badge.

Listed part numbers: APEX AVC562, FEL-PRO VS50770R and AJUSA 56041300, plus the other parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts are listed for the 2021 Nissan Murano, from SBI, QUALCAST and TOPLINE. SBI 1408217 carries the "Popular" badge.

Part numbers include SBI 1408217, QUALCAST 308217 and QUALCAST 308190, among others listed above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts for the 2021 Nissan Murano come from 3 brands — MELLING, QUALCAST and SBI.

Part numbers include MELLING VL730, QUALCAST 345012 and SBI 1211064.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts are listed for the 2021 Nissan Murano, from FEL-PRO, MAHLE / CLEVITE, QUALCAST and 2 other brands. FEL-PRO SS72821 carries the "Popular" badge.

Part numbers include FEL-PRO SS72821, MAHLE / CLEVITE SS45601A and QUALCAST 3899455, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

11 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2021 Nissan Murano, from HOLSTEIN, STANDARD MOTOR PRODUCTS, DORMAN and 6 other brands. DORMAN 916725 carries the "Popular" badge.

Economy: 4 parts, from HOLSTEIN, DORMAN and GATES. A representative part number is DORMAN 916725.

The Standard Replacement section: 7 options from STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI, ACKOJA and 3 other brands. ASTEMO / HITACHI VTS0016 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2021 Nissan Murano — ACKOJA A380600.