2024 Nissan Murano Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts are listed for the 2024 Nissan Murano, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 54270200 and MAHLE / CLEVITE CS54587.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Crankshaft Seal parts for the 2024 Nissan Murano come from 2 brands — AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 15092900, AJUSA 71008800 and MAHLE / CLEVITE 67764.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts are listed for the 2024 Nissan Murano, from AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 81047800 and MAHLE / CLEVITE GS33612.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts are listed for the 2024 Nissan Murano, from AJUSA and MAHLE / CLEVITE. MAHLE / CLEVITE 54586 carries the "Popular" badge.

This group includes MAHLE / CLEVITE 54586, MAHLE / CLEVITE 54587 and AJUSA 10181300 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2024 Nissan Murano — AJUSA 52662300.

This table covers the Engine covers. Read more

3 Engine Cover parts are listed for the 2024 Nissan Murano, from TECHPRO and VARIOUS MFR.

This group includes TECHPRO NI1228165 and TECHPRO NI1228166 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2024 Nissan Murano — AJUSA 50590200.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2024 Nissan Murano — DAYCO PB1682N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts are listed for the 2024 Nissan Murano, from AJUSA, FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: AJUSA 13261900, FEL-PRO MS97143 and MAHLE / CLEVITE MS19450.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2024 Nissan Murano — STANDARD MOTOR PRODUCTS RCS103.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Plenum Gasket parts for the 2024 Nissan Murano come from 3 brands — AJUSA, FEL-PRO and MAHLE / CLEVITE.

This group includes AJUSA 01291300, FEL-PRO MS97220 and MAHLE / CLEVITE MS19419.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

14 Motor Mount parts for the 2024 Nissan Murano come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. The "Popular" part is SKP SKM9808.

The Economy section lists 2 options from SKP — the catalog's value-priced group. SKP SKM9808 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER supply 12 parts: built to original-equipment specification. A representative part number is ANCHOR 9808.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2024 Nissan Murano come from ANCHOR.

This group includes ANCHOR 300211 and ANCHOR 300307.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts for the 2024 Nissan Murano come from 6 brands — LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 Nissan Murano — MAHLE / CLEVITE B33344.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2024 Nissan Murano come from 3 brands — DORMAN, BECK/ARNLEY and REIN.

Part numbers include BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2024 Nissan Murano, from DORMAN and AJUSA.

Part numbers include AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2024 Nissan Murano come from 3 brands — CALORSTAT, GATES and MOTORAD.

Part numbers include CALORSTAT OC2316, GATES 31115 and MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts for the 2024 Nissan Murano come from 13 brands — VARIOUS MFR, BOSCH, WIX and 10 other brands. The "Popular" part is MOBIL M1108A.

The Economy section: 7 options from VARIOUS MFR, BOSCH, CHAMP / LUBER-FINER and 3 other brands. BOSCH 72230WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 8 parts, from BOSCH, WIX, BECK/ARNLEY and 5 other brands. A representative part number is BOSCH 3300.

This table covers the oil pans that hold the engine's oil sump. Read more

4 Oil Pan parts are listed for the 2024 Nissan Murano, from DORMAN, SKP, SPECTRA PREMIUM and 1 other brand.

This group includes DORMAN 264505, SKP SK264465 and SPECTRA PREMIUM NSP24A and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 2024 Nissan Murano come from 2 brands — MAHLE / CLEVITE and AJUSA.

This group includes AJUSA 59010400, MAHLE / CLEVITE OS32250 and MAHLE / CLEVITE OS32249.

This table covers the timing chains that keep the cams in time with the crank. Read more

4 Timing Chain parts are listed for the 2024 Nissan Murano, from MELLING and S.A. GEAR.

This group includes MELLING 721, MELLING 730F and S.A. GEAR RC1038 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

4 Timing Chain & Component Kit parts for the 2024 Nissan Murano come from 3 brands — S.A. GEAR, INA and MELLING.

The Economy section: 2 options from S.A. GEAR. S.A. GEAR 76280S is listed in this group.

Standard Replacement: 2 parts, from INA and MELLING. A representative part number is INA ZC90730SX.

Listed part numbers: S.A. GEAR 76280S, S.A. GEAR 76280SW and INA ZC90730SX, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2024 Nissan Murano, from S.A. GEAR and MELLING. S.A. GEAR 91147 carries the "Popular" badge.

This group includes S.A. GEAR 91147, MELLING BG5594 and MELLING BG7067 and the remaining parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2024 Nissan Murano come from 2 brands — S.A. GEAR and MELLING. The "Popular" part is S.A. GEAR 9441.

Part numbers include S.A. GEAR 9441, S.A. GEAR 91009 and MELLING BT5441, among others listed above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Timing Cover Gasket parts for the 2024 Nissan Murano come from MAHLE / CLEVITE.

Listed part numbers: MAHLE / CLEVITE B33343, MAHLE / CLEVITE B33342 and MAHLE / CLEVITE JV5276.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts for the 2024 Nissan Murano come from 2 brands — MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 67689 and SKF 18857.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

This group shows a single part: MELLING S1221.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Torque Strut Mount parts are listed for the 2024 Nissan Murano, from ANCHOR, DEA / MARMON RIDE CONTROL and SKP. SKP SKM9747 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9747.

The Standard Replacement section: 4 options from ANCHOR and DEA / MARMON RIDE CONTROL. ANCHOR 9747 is listed in this group.

Listed part numbers: SKP SKM9747, ANCHOR 9747 and ANCHOR 9551, plus the other parts above.

This table covers the Valve covers. Read more

4 Valve Cover parts are listed for the 2024 Nissan Murano, from AUTOTECNICA and DORMAN.

Part numbers include AUTOTECNICA NI1422902, AUTOTECNICA NI1422903 and DORMAN 264787, among others listed above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2024 Nissan Murano come from 4 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand. The "Popular" part is FEL-PRO VS50770R.

This group includes FEL-PRO VS50770R, AJUSA 56041300 and AJUSA 56041200 and the remaining parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2024 Nissan Murano — MELLING VL730.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2024 Nissan Murano come from 3 brands — AJUSA, FEL-PRO and MAHLE / CLEVITE.

Part numbers include AJUSA 12012100, AJUSA 57058800 and FEL-PRO SS72821, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2024 Nissan Murano come from 2 brands — HOLSTEIN and WELLS.

Listed part numbers: HOLSTEIN 2VTS0279 and WELLS 2T1264.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: ACKOJA A380600.